• Journal of Magnetics
• /
• 제14권3호
• /
• pp.120-123
• /
• 2009

In this study, BiFe$O_3$-BaTi$O_3$ ceramics have been fabricated by a solid-state reaction method. The effects of BaTi$O_3$ content in the (1-x)BiFe$O_3$-xBaTi$O_3$ (x = 0.1, 0.2, 0.25, 0.3, 0.4, 0.5) system on crystal structure and magnetic, dielectric, and ferroelectric properties were investigated. Perovskite BiFe$O_3$ was stabilized through the formation of a solid solution with BaTi$O_3$. Rhombohedrally distorted structure (1-x)BiFe$O_3$-xBaTi$O_3$ ceramics showed strong ferromagnetism at x = 0.5. Dielectric and ferroelectric properties of the BiFe$O_3$-BaTi$O_3$ system also changed significantly upon addition of BaTi$O_3$. It was found that the maximum dielectric and ferroelectric properties were exhibited in the (1-x)BiFe$O_3$-xBaTi$O_3$ system at x = 0.25. This suggested the morphotropic phase boundary (MPB) with the coexistence of both rhombohedral and cubic phases of the (1-x)BiFe$O_3$-xBaTi$O_3$ system at x = 0.25.

• 한국세라믹학회지
• /
• 제34권2호
• /
• pp.123-130
• /
• 1997

본 연구에서는 유전상수가 크고, 유전체 손실이 적으며, 사용온도 범위에서 정전용량 변화율(TCC : tem-perature coefficient of capacitance)이 작고, 고압에 견딜 수 있는 재료를 개발하기 위하여 중고압용 capacitance의 기본재료로써 (Sr.Pb.Ca)TiO3-xBi2O3.3TiO2 계에서 Bi2O3.3TiO2의 mol.%를 5, 6, 7, 8, 9 mol.%로 변화시켰으며, 그 결과 고용한계 함량이 6mol.%이며, 6mol.%이상에서는 침상구조의 증가에 기인하여 유전율이 다시 감소하는 경향을 보였다. dopant로써 SiO2, Nb2O3, MnO2를 선정하여 첨가한 결과, MnO2를 첨가한 것이 유전성질이 가장 우수하였으며, MnO2의 함량이 0, 0.15, 0.3, 0.45 wt.% 증가함에 따라서 유전율의 감소와 동시에, TOC특성의 급격한 향상을 가져왔다.

• Applied Microscopy
• /
• 제34권1호
• /
• pp.61-69
• /
• 2004

복합 페로브스카이트 (1-x) $(Li_{1/2}Sm_{1/2})TiO_3-x (Na_{1/2}Sm_{1/2})TiO_3$ (LNST) system의 마이크로파 유전특성과 미세구조를 XRD와 SEM을 이용하여 연구하였다. 이 LNST는 산소팔면체의 antiphase tilting 뿐만 아니라, inphase tilting과 양이온의 antiparallel shift를 가지는 구조변화는 보인다. 또한 LNST계는 $0.0{\leq}x{\leq}0.4$에서 양이온($Li^{+1}$)의 휘발이 일어나서 A-site vacancy ordering에 의해 c축으로 cell doubling이 일어난다. 미세구조의 관찰을 통해 전 범위의 조성에서 비정상 입성장 현상을 관찰하였다. LNST계에서 A-site에 $Li^{+1}$을 치환한 LST의 공진주파수 온도계수는 큰 음의 값($-220ppm/^{\circ}C$)을 가지나, $Na^{+1}$을 치환한 NST는 큰 양의 값($+173ppm/^{\circ}C$)을 가진다. x=0.4일때 4 GHz에서 ${\varepsilon}_r=103,\;Q*f_{0}=3,700GHz$ 그리고 $T_{cf}=+50ppm/^{\circ}C$의 좋은 유전특성을 얻었다.

• 한국자기학회지
• /
• 제15권2호
• /
• pp.109-112
• /
• 2005

Electronic and magnetic properties of $Ti_{1-x}M_xO_{2-\delta}$ (M=Co and Fe) thin films grown by sol-gel method have been investigated. Anatase and rutile $Ti_{1-x}Co_xO_{2-\delta}$ films were successfully grown on $Al_2O_3$ (0001) substrates and exhibited p-type electrical conductivity while the undoped films n-type conductivity. Room temperature vibrating sample magnetometry measurements on the anatase and rutile $Ti_{1-x}Co_xO_{2-\delta}$ films with same x ($=4.8 at.{\%}$) showed quite similar magnetic hysteresis curves with the saturation magnetic moment of $\~4 {\mu}_B$ per Co ion despite their differences in structural and electronic properties. Such giant magnetic moment is attributable to the unquenched orbital moment of the $Co^{2+}$ ions substituting the octahedral $Ti^{4+}$ sites. Similar ferromagnetic behavior was observed for $Ti_{1-x}Fe_xO_{2-\delta}$ films that are highly resistive compared to the Co doped samples. Saturation magnetic moment was found to decrease for higher x, i.e., $\~2$ and $\~1.5 {\mu}_B$ per Fe ion for x=2.4 and 5.8 at. $\%$, respectively. Conversion electron $M\ddot{o}ssbauer$ spectroscopy measurements predicted the coexistence of $Fe^{2+}$ and $Fe^{3+}$ ions at the octahedral sites of $Ti_{1-x}Fe_xO_{2-\delta}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.5-8
• /
• 1994

In this paper, Dielectric and strain properties of (1-x-y)PMN-yPT-xST Ceramics hale been investigated as a function of the amount of SrTiO$_3$(ST). The SrTiO$_3$ content is ranged from 0.01-0.05(wt%). As the amount of ST is increased, dielectric constant has a maximun value at 0.05 mol% composition. The Curie temperature is decreased linearly with increasing ST composition and Polarization properties have been investigated. Coercive field and remnant polarization has a maximum value at 0.01mo1% composiion.

• 한국세라믹학회지
• /
• 제45권5호
• /
• pp.263-267
• /
• 2008

$(Bi_{1/2}Na_{1/2})TiO_3$-based ceramics have been intensively studied as lead-free piezoelectric ceramics. In this study, the piezoelectric properties and phase transition behaviors of BNT based solid solution $(Bi_{0.5}Na_{0.5})_{1-x}Ca_xTiO_3$ ($X=0.01{\sim}0.25$) were investigated. The morphotropic phase boundary(MPB) zone which BNT is transformed from rhombohedral to cubic structure was appeared by adding $CaTiO_3$ with 0.12 mol by the measurement of permittivity and X-ray diffraction. The behavior which ferroelectric BNT with adding $CaTiO_3$ was changed to antiferroelectric and paraelectric state was confirmed by the measurement ofhysterisis loop and depolarization temperature as a function of temperature. As $CaTiO_3$ concentration was increased, the phase transition temperature was decreased. The piezoelectric properties were highest at 0.01 mol of $CaTiO_3$ concentration. The electromechanical coupling factor($K_t$) and mechanical quality factor($Q_m$) were 42% and 254, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.365-366
• /
• 2005

PZT films are the most intensively investigated because PZT has advantages such as low processing temperature and large remnant values. In this paper, the microstructure and electric properties of $Pb(Zr_x,Ti_{(1-x)})O_3/BaTiO_3$ heterolayered thick films with Zr mole ranging from 30 to 70 % screen printed onto a alumina substrate were studied. $Pb(Zr_x,Ti_{(1-x)})O_3$ and $BaTiO_3$ powders were prepared by the sol-gel method. The $BaTiO_3$ powders were calcined at $700^{\circ}C$ for 2 hours. Structural properties of $Pb(Zr_x,Ti_{(1-x)})O_3/BaTiO_3$ multilayered thick films were investigated. As a result of the X-ray diffraction (XRD) analysis, $Pb(Zr_x,Ti_{(1-x)})O_3/BaTiO_3$ exhibited a perovskite polycrystalline phase without pyrochlore phase or any preferred orientation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.131-134
• /
• 2002

The effect of the addition on the densification, low temperature sintering, and microwave dielectric properties of the Ca[($Li_{1/3}Nb_{2/3}$)$_{1-x}$$Ti_{x}$]$O_{3-{\delta}}$/(CLNT) was investigated. $Bi_2O_3$ additives improved the dencification and reduced the sintering temperature from $1150^{\circ}C$ to $900^{\circ}C$ of CLNT microwave dielectric ceramics. As increasing $Bi_2O_3$ contents, the dielectric constants and bulk density were increased. The quality factor, however, was decreased slighty. The temperature coefficients of the resonant frequency shifted positive value as increasing $Bi_2O_3$ contents. The dielectric properties of Ca[($Li_{1/3}Nb_{2/3}$)$_{1-x}$$Ti_{x}$]$O_{3-{\delta}}$ and Ca[($Li_{1/3}Nb_{2/3}$)$_{0.8}Ti_{0.2}$]$O_{3-{\delta}}$ with 5wt% $Bi_2O_3$ sintered at $900^{\circ}C$ for 3h were $\varepsilon_{r}$=20, 35 Q.$f_{0}$=6500, 11,000 GHz, $\tau_{f}$=4, 13 ppm/$^{\circ}C$, respectively.

• 한국세라믹학회지
• /
• 제38권3호
• /
• pp.280-286
• /
• 2001

10 이하의 저유전율을 갖는 (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x=0.1~0.9) 세라믹스의 미세구조와 고주파 유전특성을 조사하였다. (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x=0.1~0.9) 세라믹스는 정방정(tetragonal) 구조를 가진다. 0.1BaWO$_4$-0.9Mg$_2$SiO$_4$세라믹스는 BaWO$_4$와 $Mg_2$SiO$_4$의 상들이 공존하는 혼합상을 보였으며, $Mg_2$SiO$_4$가 이차사으로 형성된 것이 관찰되었다. 120$0^{\circ}C$~140$0^{\circ}C$에서 2시간 동안 소결된 (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x=0.1~0.9) 세라믹스는 $\varepsilon$$_{r}$=6.37~8.21, Q.f=15000~99422 그리고 $ au$$_{f}$=73.9~48.9 ppm/$^{\circ}C$의 고주파 유전특성을 가졌다. $\tau$$_{f}$를 보정하기 위해, CaTiO$_3$(1,5 wt%)가 (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x$\geq$0.9) 세라믹스에 첨가되었다. 135$0^{\circ}C$에서 2시간 동안 소결된 0.1BaWO$_4$-0.9Mg$_2$SiO$_4$+CaTiO$_3$(5 wt%) 세라믹스는 $\varepsilon$$_{r}$=7.3, Q.f=30532 그리고 $\tau$$_{f}$=-30 ppm/$^{\circ}C$의 고주파 유전특성을 얻었다. 얻었다.

• 마이크로전자및패키징학회지
• /
• 제6권2호
• /
• pp.75-81
• /
• 1999

$CaTiO_3$의 유전적 특성의 문제점을 해결하기 위해 $CaTiO_3$에 복합페로브스카이트 구조를 갖는$ La(Mg_{2/3}Ta_{1/3})O_3$를 고용시켜 마이크로파 유전특성을 조사하였다. XRD분석을 통하여 $CaTiO_3$에 $ La(Mg_{2/3}Ta_{1/3})O_3$를 첨가하면 고용체가 형성되며, 구조적으로는 Orthorhombic구조에서 $ La(Mg_{2/3}Ta_{1/3})O_3$의 첨가량이 증가함에 따라 단사정 대칭의 고용체형으로 바뀌어 가는 것을 확인할 수 있었다. (1-x)$CaTiO_3+xLa(Mg_{2/3}Ta_{1/3})O_3$에서 x값이 0.3일 때 유전율 49, 온도계수+$14ppm/^{\circ}C$, $Q \times f_0$ 값은 17000인 재료를 제조할 수 있었다.