• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권2호
• /
• pp.18-22
• /
• 2001

The thin films of high permitivity in ferroelectric materials using a capacitor are applied to DRAMs and FRAMs. (Ba, Sr)TiO$_3$ thin as ferroelectric materials were prepared by the sol-gel method and made by spin-coating on the Pt/Sio$_2$/Si substrate at 4,000 [rpm] for 10 seconds. The structural characteristics of the surface were analyzed by fractal dimension. The thickness of BST ceramics thin films was about 260∼280 [nm]. The property of the leakage current was stable with 10-9∼10-11[A] when the applied voltage was 0∼3[V]. BST thin films ha low leakage current properties when fractal dimension was low and a coating area was high.

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.620-624
• /
• 2016

Ferroelectric $Pb(Zr_{0.52}Ti_{0.48})O_3$ (PZT) films were deposited on SrTiO3(100) substrate by using conductive $SrRuO_3$ films as underlayer and their structural and ferroelectric properties were investigated. PZT films were grown in (00l) orientation on well lattice-matched pseudo-cubic $SrRuO_3$ films. Thickness dependence of ferroelectric and electrical properties of PZT films was investigated. PZT film with 400 nm thickness showed a remanent polarization ($P_r$) of $29.0{\mu}C/cm^2$ and coercive field ($E_c$) of 83 kV/cm, and $P_r$ decreased and $E_c$ increased with thickness reduction. The dielectric constant for PZT films showed gradual decrease with thickness reduction. Breakdown field of PZT films did not show the thickness dependence and displayed as high value as 1 MV/cm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1505-1507
• /
• 1996

In this study, $(Pb_{0.88}La_{0.12})(Zr_{0.40}Ti_{0.60})O_{2.97}$ (La/Zr/Ti=12/40/60) ceramic thin films were fabricated from an alkoxide-based by Sol-Gel method. PLZT stock solutions were made and spin-coated on the ITO-glass rubstrate at 4000[rpm] for 30[sec]. Coated specimens were baked to remove the organic materials at $400[^{\circ}C]$ for 10[min]. This procedure was repeated 5 times. The coated films were finally annealed at $450{\sim}700[^{\circ}C]$ for 1[hr]. The ferroelectric perovskite phases precipitated under the sintering of $550{\sim}700[^{\circ}C]$ for 1[hr]. Relative dielectric constant of the PLZT thin were increased with increasing the sintering temperature, the thin file sintered at $650[^{\circ}C]$ showed the highest value of 196. But in the PLZT thin film sintered at $700[^{\circ}C]$, relative dielectric constant was greatly decreased due to reacts between ITO electrode and glass substrate. In all thin films, the transmittance was more than 70[%] (at 632.8[nm]).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.360.1-360.1
• /
• 2014

DSSC (Dye-Sensitized Solar Cell)의 TCO (Transparent Conductive Oxide)와 전해질 사이의 전자 재결합(Back reaction)은 DSSC의 효율을 떨어뜨리는 요소 중 하나이다. 이와 같은 문제점을 해결하기 위하여 Blocking layer로서 $TiO_2$ 가 많이 사용되어지고 있다. 본 실험에서는 $HfO_2$ 를 Blocking layer로 사용하여 전자 재결합으로 인한 효율 저하를 막기 위한 연구를 진행하였다. 기존 $TiO_2$ 대비 $HfO_2$는 큰 에너지 밴드갭을 가지고 있어, TCO와 전해질 사이에 전자 재결합을 줄여주는 역할을 하기 때문에 DSSC의 효율 향상을 확인할 수 있다. 효율 측정은 1sun (100 mW/cm, AM1.5)조건에서 solar simulator를 이용하여 측정 했으며, 전자 재결합 감소는 Dark Current, EIS (Electrochemical Impedance spectroscopy)의 측정을 통하여 확인하였다. $HfO_2$를 이용한 blocking layer를 염료 감응 태양전지에 적용하면, 전자 재결합에 의한 손실을 줄여 성능적 측면에서 개선 가능할 것으로 생각된다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.174-174
• /
• 2003

Highly (111)-oriented PZT [Pb(Zrl-xTix)O3] thin films in the Zr-rich rhombohedral phase-field were successfully fabricated on Pt(111)/Ti/SiO2/Si substrates by combining PLD method with sol-gel process. These highly (111)-oriented films can be used as model systems for polarized Raman scattering study of PZT in the rhombohedral-Phase field because the (111)-direction is the principal off-center axis of the rhombohedral ferroelectricity. For this purpose, we have fabricated PZT films employing two distinctive compositions : one with Zr/Ti = 90/10 (abbreviated as PZT90/10) and the other with Zr/Ti= 60/40 (PZT60/40). The PZT90/10 film belongs to the octahedrally distorted FR(LT) phase with a cell-doubled structure, whereas the PZT60/40 is in the high-temperature FR(HT) phase-field at room temperature. To clearly separate E(TO) phonon modes from Al(TO) modes of the (111)-oriented rhombohedral film, we have suitably devised Z(X,Y)Z and Z(X,X)Z backscattering geometries for E(TO) and Al (TO), respectively. The polarized scattering experiment demonstrated that both types of (111)-oriented rhombohedral films closely followed the Raman selection rule.

• 한국재료학회지
• /
• 제9권5호
• /
• pp.484-490
• /
• 1999

Pt/SiOz!Si의 기판위에 $(Pb,La)TiO_3$(PLT) 박막을 졸-겔 방법으로 제작하여 La 첨가량 및 후속열처리 온도에 따른 결정학적, 전기적 특성율 조사하였다. $600^{\circ}C$ 이상의 온도에서 열처리된 PLT 박막 시료의 경우 La 도핑량에 관계없이 전형적인 perovskite 결정구조를 보여 주었다. La이 전혀 첨가되지 않은 $(Pb,La)TiO_3$(PT) 시료에 10 mole% La을 첨가할 경우 (PLT-I0 시료) c축 배향도는 약 63%에서 26%로 크게 감소하였다. PLT-1O 박막시료의 깊이에 따른 AES 분석결과 박막내의 각 성분원소 들이 비교척 균일하게 분포되어 았고 하부전극(Pt)과 PLT 박막층 사이에는 상호반응없이 비교적 안정된 막을 형성하고 있음을 알 수 있었다. $600^{\circ}C$에서 열처리된 PLT-1O 박막의 유전상수$({\varepsilon}r)$ 와 유전정접 (tan$\delta$) 은 약 193과 0.02의 값을 나타내였다. 후속열처리 온도를 $600^{\circ}C 에서 700^{\circ}C$로 증가함에 따라 잔류분극$(2Pr,Pr_+-Pr_-)$은 약 $4\muC\textrm{cm}^2 에서 약 16\muC\textrm{cm}^2$로 크게 증가하였으며 잔류 분극값의 증가는 후속열처리에 의해 결정성이 개선되었기 때문이라 판단된다. $30^{\circ}C$ 온도부근에셔 초전계수($\gamma$)는 약 $4.0nC/\textrm{cm}^2{\cdot}^{\circ}C$의 값을 냐타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.7-7
• /
• 2010

The SBN thin films were deposited at substrate temperature of 300[$^{\circ}C$] on Pt-coated electrode (Pt/Ti/$SiO_2$/Si(100)) using RF sputtering method. The grain and crystallinity of SBN thin films were increased with the increase of annealing temperature. The dielectric constant(150) of SBN thin film was obtained by annealing temperature above 750[$^{\circ}C$]. The frequency dependence of dielectric loss showed a value within 0.03 in frequency ranges of 1~1000[kHz].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.726-729
• /
• 2004

Etching characteristics of (Pb,Sr)$TiO_3$(PST) thin films were investigated using inductively coupled chlorine based plasma system as functions of gas mixing ratio, RF power and DC bias voltage. It was found that increasing of hi content in gas mixture lead to sufficient increasing of etch rate and selectivity of PST to Pt. The maximum etch rate of PST film is $562{\AA}/min$ and the selectivity of PST film to Pt is 0.8 at $Cl_2/(Cl_2+Ar)$ of 20 %. It was Proposed that sputter etching is dominant etching mechanism while the contribution of chemical reaction is relatively low due to low volatility of etching products.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.305-305
• /
• 2010

It is known that a pulse of electrons of high kinetic energy (1-3 eV) in metals can be generated with the deposition of external energy to the surface such as in the absorption of light or in exothermic chemical processes. These energetic electrons are not in thermal equilibrium with the metal atoms and are called "hot electrons" The concept of photon energy conversion to hot electron flow was suggested by Eric McFarland and Tang who directly measured the photocurrent on gold thin film of metal-semiconductor ($TiO_2$) Schottky diodes [1]. In order to utilize this scheme, we have fabricated metal-semiconductor Schottky diodes that are made of Pt or Au as a metallic layer, Si or $TiO_2$ as a semiconducting substrate. The Pt/$TiO_2$ and Pt/Si Schottky diodes are made by PECVD (Plasma Enhanced Chemical Vapor Deposition) for $SiO_2$, magnetron sputtering process for $TiO_2$, e-beam evaporation for metallic layers. Metal shadow mask is made for device alignment in device fabrication process. We measured photocurrent on Pt/n-Si diodes under AM1.5G. The incident photon to current conversion efficiency (IPCE) at different wavelengths was measured on the diodes. We also show that the steady-state flow of hot electrons generated from photon absorption can be directly probed with $Pt/TiO_2$ Schottky diodes [2]. We will discuss possible approaches to improve the efficiency of photon energy conversion.

• 한국자기학회지
• /
• 제16권3호
• /
• pp.168-172
• /
• 2006

졸-겔(sol-gel) 방법을 이용하여 제작된 산소결핍(oxygen vacancy)들을 내포하는 Ni 도핑된 루타일(rutile) 구조의 $TiO_{2-{\delta}}$ 박막들에 대하여 그 자기적 성질 및 관련된 전자구조적 성질에 대하여 조사분석 하였다. $TiO_{2-{\delta}}$:Ni 박막들에서 상온 강자성이 관측되었으며 Ni 도핑량이 증가할수록 포화 자화량($M_s$)이 점차 감소하여 6 at% 이상에서 일정한 값으로 유지되었다. 이와 같은 Ni 도핑량 6 at% 이하에서의 강자성 현상은 산소결핍 자리에 속박된 전자를 매개로 그 주위에 존재하는 불순물 이온들의 자기 능률들이 강자성 정렬을 이루게 되는 자기 폴라론(magnetic polaron)의 형성에 의한 것으로 해석된다. 소량의 Ni 도핑 시 각 이온당 최대 $3.7{\mu}_B/Ni$의 큰 $M_s$ 값이 나타났으며 6 at% 이상에서의 일정한 $M_s$ 값은 Ni cluster 형성에 의한 것으로 해석된다. 이와 같은 Ni cluster의 존재는 시료들에 대한 Hall 측정 결과 나타난 Ni 도핑량 증가에 따르는 p-n 전도성 전이를 설명하여 줄 수 있다.