• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2002년도 추계학술강연 및 발표대회
• /
• pp.79-79
• /
• 2002

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2003년도 춘계학술강연 및 발표대회
• /
• pp.16-17
• /
• 2003

• 분석과학
• /
• 제20권4호
• /
• pp.302-307
• /
• 2007

$TiO_2$ 나노분말 제조시 HCl과$NH_4OH$의 첨가량에 따른 반응양상과 pH의 영향을 고찰하였다. Titanium tetra-isopropoxide의 가수분해 반응을 이용하여 nanosize의 $TiO_2$ 분말를 합성하였고, 촉매로 HCl과$NH_4OH$를 사용하였다. 촉매의 첨가량에 따른 반응양상과 생성된 $TiO_2$ 분말의 특성 변화를 조사하였다. 염기성 촉매인$NH_4OH$를 사용하였을 경우에 균질한 형상의 분말 형태의 $TiO_2$를 합성할 수 있었으며, 산성 촉매인 HCl을 사용하여 pH가 5.04 이하일 경우에는 괴상이나 과립의 형태로 생성되었다. 사용한 촉매의 종류와 양에 따라 저온의 결정상인 anatase의 생성속도와 보다 안정한 rutile 상으로의 상전이 속도가 영향을 받았다.

• 한국분말재료학회지
• /
• 제6권1호
• /
• pp.75-80
• /
• 1999

The formation of $n-TiO_2$ powder by oxidation of Ti-ethoxied vapor in a flat flame burner reactor maintained under 20 torr has been studied. The produced powder were characterized in terms of crystal structure, chemical composition by XRD and TEM. The results showed that the powder consisted of loose agglomerated anatase and rutile particles and their size were about 10 nm and 20 nm, respectively. In the course of synthesis, changes of the flame color were happened to each condition during heating up the bubbler. The flame color transition phenomena reveled that a critical precursor delivery rate was needed for the powder formation (obtainable powder yield). The critical precursor delivery rate was estimated by a simple function of the bubbler temperature and the carrier gas flow rate. The critical precursor delivery rate was reviewed as an important variable of the nanopowder synthesis.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.394-397
• /
• 2008

In this research, the fine-structure TiO2+Ti bulks have been fabricated by the combined application of magnetic pulsed compaction (MPC) and subsequent sintering, and their densification behavior was investigated. The obtained density of $TiO_2$+Ti bulk prepared by the combined processes was increased with increasing MPC pressure from 0.7 to 1.7 GPa. Relatively higher density (88%) in the MPCed specimen at 0.7Gpa was attributed to the decreasing of the inter-particle distance of pre-compacted component. High pressure and rapid compaction by Magnetic Pulsed Compaction could reduce shrinkage rate (about 10%) of the sintered bulks compared to that of general processing (about 20%). Mixing conditions of PVA, water, Ti and $TiO_2$ nano powder for compaction of $TiO_2$ nano powder did not affect on density and shrinkage of the sintered bulks due to high pressure of MPC.

• 한국세라믹학회지
• /
• 제28권3호
• /
• pp.215-224
• /
• 1991

The synthesis of SrTiO3 powders having high purity and homogeneous submicron particle size was attempted by the oxalate method. The microstructure and dielectric properties of SrTiO3 based boundary layer capacitor (BLC) were investigated. Strontium titanyl oxalate[SrTiO(C2O4)2.4H2O] was prepared from the mixing solution of (Sr, Ti) using oxalic acid(H2C2O4) as a precipitating agent at 8$0^{\circ}C$. The crystalline SrTiO3 powder was obtained by thermal decomposition of the precipitate above $600^{\circ}C$. The crystalline SrTiO3 powder containing Nb2O5 as a dopant, TiO2 and SiO2 as additives was sintered at 1360~144$0^{\circ}C$ in the reducing atmosphere to get semiconductive SrTiO3. Insulating material containing PbO-Bi2O3-B2O3 frit was printed on the sintered semiconductive SrTiO3 and fired at 120$0^{\circ}C$ for 2h to get the grain boundary diffusion.

• 한국재료학회지
• /
• 제26권8호
• /
• pp.406-411
• /
• 2016

In order to reuse the photocatalyst and enhance the photolysis efficiency, we have used atmospheric pressure dielectric barrier discharge (APDBD) to clean and activate $TiO_2$ powder. The photocatalytic activity of the $TiO_2$ powder before and after APDBD treatment was evaluated by the degradation of methylene blue (MB) in aqueous solution. The apparent reaction rate constant of photolysis of the first sample of reused $TiO_2$ cleaned by APDBD improved to a level up to 0.32h-1 higher than the 30 % value of the initial $TiO_2$ powder. As the number of photolysis reactions and APDBD cleanings increased, the apparent rate constants gradually decreased; however, the fourth photolysis reaction still showed a value that was greater than 10% of the initial value. In addition, APDBD treatment enhanced the process by which $TiO_2$ effectively adsorbed MB at every photolysis stage.

• Nuclear Engineering and Technology
• /
• 제31권5호
• /
• pp.455-464
• /
• 1999

The effect of TiO$_2$ on the sintering behavior of mixed UO$_2$-U$_3$O$_{8}$ Powder compacts has been investigated using the U$_{3}$O$_{8}$ powder made tv oxidation of defective UO$_{2}$ pellets. Without TiO$_2$, UO$_2$ pellet density is inversely proportional to U$_3$O$_{8}$ content and is below 94 %TD in the U$_3$O$_{8}$ range above 15 wt%. Using more than 0.1 wt % TiO$_2$, however, the density decreases slightly with U$_3$O$_{8}$ content and thus is higher than about 94% TD in the whole range of U$_3$O$_{8}$ content. The grain sizes of UO$_2$ pellets with more than 0.1 wt % TiO$_2$are larger than about 30${\mu}{\textrm}{m}$. Therefore, the U$_3$O$_{8}$ Powder can be reused without any restriction on its amount in UO$_2$ pellet fabrication by sintering the mixed UO$_2$-U$_3$O$_{8}$ compact with the aid of TiO$_2$. Mechanisms for densification and grain growth are proposed and discussed, based on a dilatometry study and an examination of microstructure. microstructure.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.49-50
• /
• 2006

[ $Ti(Al,\;O)-Al_2O_3$ ] composite powders were produced by high energy mechanical milling of a mixture of Al and $TiO_2$ powders followed by a combustion reaction. The powders were subsequently thermally sprayed on H13 steel substrates. Microstructural examination was conducted on the composite powders and thermally sprayed coatings, using X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The performance of the coatings was evaluated in terms of micro-hardness and thermal fatigue. The thermally sprayed coatings performed very well in the preliminary thermal fatigue tests and showed no wetting tendency to molten aluminum.

• 자연과학논문집
• /
• 제8권1호
• /
• pp.61-69
• /
• 1995

$BaTiO_3$는 일반적으로 $BaCO_3$와 $TiO_2$의 고상반응으로 얻어지는데 BaO의 활성이 높고 이차상이 생성되므로 순수하게 합성하기가 어렵다. 순수한 $BaTiO_3$를 얻기 위해서 공침법, 가수분해법등이 연구되고 있으나 출발 원료가 비싸고 제조 공정상 문제로 고상반응으로 합성한 것과 별차이가 없다. 그래서 고상반응의 공정을 개선하는 연구가 다시 진행되고 있으며 본 연구에서도 $BaTiO_3$를 고상반응으로 합성할 때 물성에 좋지 않은 영향을 주는 이차상인 $Ba_2TiO_4$의 생성기구를 밝히고, 그것을 조절하려 했다. $BaTiO_3$의 이론조성중 Ba가 과잉인 영역에서는 $Ba_2TiO_4$가 $TiO_2$가 과잉인 영역에서는 $BaTiO_2O_5$와 $BaTiO_3O_7$이 소지의 팽창에 원인이 되었다. 환원에서 소결되는 $CeAIO_3$와 $BaTiO_3$계의 유전체는 공기중에서 $CeAIO_3$가 분해되고 이때 생성되는 $CeO_2$가 $BaTiO_3$의 전기적 물성에 큰 영향을 주었다.