• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2200-2206
• /
• 2012

One-dimensional $TiO_2$ array grown on optically transparent electrode holds a promise as a photoelectrode for photoelectrochemical water splitting; however, its crystal structure is rutile, imposing constraints on the potent use of this nanostructure. To address this issue, a heterojunction with type-II band alignment was fabricated using atomic layer deposition (ALD) technique. One-dimensional core/shell structured $TiO_2$/ZnO heterojunction was superior to $TiO_2$ in the photoelectrochemical water splitting because of better charge separation and more favorable Fermi level. The heterojunction also possesses better light scattering property, which turned out to be beneficial even for improving the photoelectrochemical performance of semiconductor-sensitized solar cell.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.6
• /
• pp.357-362
• /
• 2015

A novel $TiO_2$-Coconut Shell Powder Composite (TCSPS), prepared by the controlled sol-gel method with subsequent heat treatment, was evaluated as an innovative photocatalytic absorbent for the removal of methylene blue. Optimal preparation conditions of TCSPC were obtained by a response surface methodology and a central composite design model. As compared with the results obtained from one-factor-at-a-time experiments, the values were approximated to the nearest condition of these values and the following experimental parameters were set as the optimum : $600^{\circ}C$ calcination temperature and 20 g of coconut shell powder loading amount.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.71-71
• /
• 2011

전류를 흘렸을 때 양극과 음극에 따라 움직이는 미세한 나노입자를 이용하여 색, 글자, 그림 등을 표시하는 응용디스플레이 기술이 전기영동디스플레이(electrophoretic display)이다. 최근 전자종이 등 상품화가 진행되면서 전기영동디스플레이에 대한 관심증대와 함께 기술개발이 지속적으로 진행되고 있다. 본 연구에서는 분산중합을 이용하여 $TiO_2$ core 입자에 polystyrene을 shell로 코팅하여 마이크로캡슐형의 전기영동디스플레이에 적합한 입자를 제조하고 성능을 분석하였다. 먼저 분산제의 종류, 모노머의 농도, 개시제의 농도에 따라 제조된 대전복합입자의 크기 및 분포를 보면, 분산제의 종류를 달리 하였을때를 제외하고 대체로 균일하였다. 입경의 변화를 보면, 약 200-300nm의 $TiO_2$가 개질에 의해 400-500nm의 입경을 나타내는 것으로부터 200nm 두께의 shell층을 갖는다는 것을 확인 할 수 있었다. 또한 분산제의 종류에 따라서는 분산제를 사용하지 않는 경우가 오히려 제조된 입자의 분포가 균일함을 알 수 있었고 모노머의 농도에 따른 변화는 볼 수 없었으며 입경분포가 균일한 입자가 제조되었음을 알 수 있었다. 대전복합입자의 TGA 곡선으로부터 $300^{\circ}C$ 부근에서 polystrene shell에 의한 분해를 볼 수 있었고 $600^{\circ}C$ 이후에 잔류된 core의 $TiO_2$ 입자를 확인 할 수 있었다. 이 결과로부터 $TiO_2$ core-polystyrene shell형의 전자 종이용 대전복합입자의 제조를 확인 할 수 있었다. 또한 제조된 대전복합입자의 zeta potential을 보면, (+)전하를 띄며 64.8mV의 비교적 높은 zeta potential을 가지는 것을 확인 할 수 있었다. 그리고 $TiO_2$ 대전복합입자와 같은 방법으로 제조된 흑색 대전복합입자를 혼합하여 cell test를 측정한 결과, cell에 ${\pm}$10V의 저전압을 가했을 때에도 비교적 응답속도가 빠른 입자의 구동현상을 확인 할 수 있었다.

• Korean Journal of Materials Research
• /
• v.16 no.12
• /
• pp.754-760
• /
• 2006

Mercaptoundecanoic acid (MUA) has been used to enhance the dispersity of Au nanoparticles in organic solvent and the affinity between the Au nanoparticles surface and titanium dioxide shell in the synthesis of $Au/TiO_2$ core-shell composite nanoparticles. The dispersity of the MUA-coated Au nanoparticles in ethanol aqueous solution with different concentration of $H_2O$ was investigated by UV-Vis. absorption spectrum and the coating amount of MUA was varied from 0.02 mM to 1.0 mM. The MUA-coated Au nanoparticles were highly dispersed in pure $H_2O$ in the wide range of the coating amount of MUA. On the contrary, the MUAcoated Au nanoparticles showed an enhanced stability in the ethanol/$H_2O$=8/2 mixed solution only when the coating amount of MUA was 0.05 mM, and in the ethanol/$H_2O$=7/3 mixed solution when the coating amount of MUA was in the range from 0.02 mM to 0.17 mM. From this systematic study, it can be inferred that the stability and the dispersibility of Au nanoparticles in organic solvents are highly sensitive towards the amount of MUA coating.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.237-243
• /
• 2008

Nano core shell structures of $TiO_2$ particles coated on surface of ZnO nanoparticles were prepared by the polymerized complex and sol-gel method. The average particle size of ZnO by the polymerized complex method showed 100 nm and the average particle size of $TiO_2$ by the sol-gel method showed below 10 nm. The average particle size of $ZnO@TiO_2$ nano core shell struture represented about 150 nm. The agglomeration between the ZnO particles using the polymerized complex method was highly controlled by the uniform absorption of $TiO_2$ colloid on the spherical ZnO surfaces. The driving force of heterogeneous bonding between ZnO and $TiO_2$ was induced by the Coulomb force. The ZnO and $TiO_2$ particles electrified with + and - charges, respectively, resulted in strong bonding by the difference of iso-electric point (IEP) when they laid neutrality pH area, depending on the heterogeneous surface electron electrified by the different zeta potential on the pH values.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.690-694
• /
• 2021

Carbon spheres (CS) were fabricated using glucose as a precursor in the hydrothermal method. Hollow TiO₂ (H-TiO₂) spheres with 200 nm, 500 nm, and 1,200 nm were synthesized by CS/TiO₂ core-shell particles via a sol-gel and calcination method. H-TiO₂ spheres with nano and micron sizes were characterized using FE-SEM, HR-TEM, and X-ray diffraction. The CIE color coordinate, solar reflectance, and heat shield temperatures of H-TiO₂/polyacrylate (PA) composite film were investigated using a UV-Vis-NIR spectrometer and homemade heat insulation temperature measuring device. H-TiO₂/PA composites exhibit excellent thermal insulation since the hollow structure filled with dry air has low thermal conductivity and near infrared light reflecting performance. The thermal insulation increased with increasing the hollow sphere (HS) size on H-TiO₂/PA composites. The PA composite film mixed with H-TiO₂ filled with 1200 nm HS reduced the heat shield temperature by 26 ℃ compared to that of the transparent glass counterpart.

• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.183-187
• /
• 2007

$SiO_2/TiO_2$ core-shell particles with controlled shell thickness were prepared using large silica particles. The thickness of titania coating layer was varied from 8 nm to 38 nm depending on the number of coating steps from 1 to 3 times. After titania coating, the core-shell particles showed textured surface due to the titania coating layer, resulting in 3~25 times increase of specific surface areas. The properties of titania coated silica particles were characterized by FE-SEM, Zeta potential meter, BET, and XRD.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.85-88
• /
• 2012

DSCs are based on a dye-adsorbed porous $TiO_2$ layer as a photo electrode [1]. Under the illumination, dye molecules are excited and electrons are produced. The injected electrons in the conduction band of $TiO_2$ may recombine with the electrolyte. To obtain high performance DSCs, it is essential to retard the recombination. The charge recombination can be reduced by forming core-shell structure. In this work, we investigated the core-shell structure with $Al_2O_3$ and MgO coating layer on the porous $TiO_2$ layer. We confirmed the photovoltaic properties by I-V characteristics. The current and the efficiency was improved. In addition to, Through decrease in the width of EIS arc, which is the sum of the interfacial charge transfer resistances of both electrodes, we can be indicated that the block effect.

• Clean Technology
• /
• v.8 no.4
• /
• pp.173-180
• /
• 2002

As a primary material for MLCC, $BaTiO_3$ particles coated with two additives in a core-shell structure were prepared in this study. This composite powder can not only reduce the VOC emission during MLCC manufacture but also increase the density and reliability of electronic products. The additives were $Y_2O_3$ and $MnCO_3$, whose composition information was obtained from domestic companies. It was observed that the surface of $BaTiO_3$ particles was uniformly as well as simultaneously coated by those two materials via urea-decomposition reaction over $70^{\circ}C$ as the reaction temperature. Elemental analysis indicated that the measured content of each additve was quite close to the designated value. The effect of polymeric dispersant such as PVP, on the coating characteristics was not as significant as expected.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1471-1472
• /
• 2011

최근 경재적인 한계를 드러내고 있는 실리콘 태양전지의 대안으로 주목받고 있는 염료감응형 태양전지는 식물의 광합성 원리에 기초하여 빛이 입사하면 염료 분자가 포톤을 흡수해 여기하면서 전자를 방출함으로써 기전력을 발생시키는 원리로 동작한다. 염료에서 발생된 전자는 $TiO_2$의 conduction band로 주입되어 확산을 통해 TCO 기판으로 이동한다. 이때 다공성 나노구조의 $TiO_2$ 표면과 전해질의 접촉이 발생하게 되고 이로 인해 $TiO_2$ conduction band의 전자와 전해질의 $I_3{^-}$ 간의 재결합이 발생하게 되는데 이것은 DSC의 기능을 저하시키는 요인 중의 하나이다. 이러한 문제점은 $Al_2O_3$, ZnO, MgO, $BaTiO_2$ 등의 표면처리에 의한 core-shell 나노구조를 형성함으로써 해결할 수 있다. 본 연구에서는 aluminum isopropoxidee와 magnesium chloride 혼합 용액을 사용하여 core-shell 나노구조를 형성하여 셀을 제작하고, 완성된 셀의 출력특성과 내부 임피던스의 변화를 측정, 분석함으로써 단일 용액을 사용하였을 때에 비해 효과적인 재결합 감소와 광전압의 상승효과를 확인할 수 있었다.