• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.103-111
• /
• 1998

Au fine particle dispersed TiO2 film was prepared on silica glass substrate by sol-gel dip and firing process. The films were fabricated from the system of titanium tetraisoproxie-EtOh-HCl_H2O-hydrogen tetrachloroaurate(III) tetrahydrate. The conditions for the formation of the clear solution and dissolving high concentration of Au compound were examined. And a photoreduction process was adopted to control the size of gold metal particles. Phase evolution of matrix TiO2 and variation of Au particle with UV irradiation were investigated by XRDA, SEM, TEM and UV-visible spectrophotometer. And the effect of CPCl(Cetylpyridinium chloride monohydrate) as a dispersion agent was evaluated.

• 한국세라믹학회지
• /
• 제24권2호
• /
• pp.111-116
• /
• 1987

By the method of direct wet process which has been developed in our laboratory, the high purity BaTiO3 powders could be synthesized from the room temperature to 90$^{\circ}C$ according to particle sizes. For to detect the PTCR effects, Sb2O3 wasdoped in the BaTiO3 powders which had been prepared on above method. As the results, the PTCR effects were in creased with the decreasing grain size of BaTiO3 powders.

• 한국세라믹학회지
• /
• 제36권4호
• /
• pp.343-353
• /
• 1999

2.45 GHz의 microwave가 수열 합성법으로 제조된 BaTiO3 분말의 특성에 미치는 영향을 조사하였다. 700W 출력으로 반응시켰을 때, microwave-autoclave system에서는 약 5분만에 BaTiO3 결정이 형성되기 시작하여, 10분 이상의 반응에서는 더 이상 결정성 증가는 관찰되지 않았다. Microwave-system의 경우에는 15분만에 결정이 형성되기 시작하여, 1시간정도의 반응으로 충분한 BaTiO3 분말을 얻을 수 있었다. Microwave를 이용한 균일가열의 영향으로 분말들은 균일하게 분산되어 있었고, 기존의 전기적인 가열 방법에서 나타나는 응집 현상이나 grain의 성장 등은 보이지 않았다. 제조된 분말의 크기는 보통 30~60 nm정도였는데, 졸 안의 Ba/Ti의 비가 분말의 크기를 결정하는데 중요한 역할을 하였다. 이는 여분의 바륨이 Ba(OH)2등과 같은 다른 상을 형성하여 BaTiO3 분말의 계면에 얇은 막을 형성하여 분말들의 응집 현상이나 grain의 성장을 억제하는 것으로 추정하였다. M1-crowave-autoclave 에서는 15분 정도의 반응만으로도 미량이지만 tetragonal-BaTiO3를 직접적으로 형성할 수 있었고, microwave-reflux에서는 25$0^{\circ}C$의 건조로써 미량의 tetragonal-BaTiO3를 얻을 수 있었다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1097-1098
• /
• 2006

The Powder characteristics and sintering behavior of $SiO_2$ coated $BaTiO_3$ were studied. Silica coated $BaTiO_3$ powders were prepared by sol-gel method. The particle size of the $BaTiO_3$ powders were $\sim35$ nm and the thickness of the $SiO_2$ coating layer was $\sim5$ nm. As the $SiO_2$ content increased, the $SiO_2$ layers improved the powder dispersion. The Zeta potential of $SiO_2$ coated $BaTiO_3$ was getting close to that of pure silica with a more negative charge, compared with that of the uncoated $BaTiO_3$. The onset temperature of shrinkage curves shifted to higher temperatures with increasing $SiO_2$ contents

• 한국결정성장학회지
• /
• 제1권1호
• /
• pp.107-116
• /
• 1991

초음파 진동자를 사용 분무 열분해시켜 $Pb(NO_3)_2$와 $TiO(NO_3)_2$ 용액으로부터 $PbTiO_3$ 미분말을 합성하고 미립자의 특성을 조사하였다. 또한 미립자 형성과정을 같은 방법으로 합성되어 문헌에 보고된 $BaTiO_3$, $ZrO_2$, ZnO 등의 미립자 형성과정과 비교 검토하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.288-288
• /
• 2013

We report the catalytic activity of Au/$TiO_2$ and Pt/$TiO_2$ nanocatalysts under CO oxidation fabricated by arc plasma deposition (APD), which is a facile dry process with no organic materials involved. Using APD, the catalyst nanoparticles were well dispersed on $TiO_2$ powder with an average particle size (2~4 nm) well below that of nanoparticles prepared by the sol-gel method (10 nm). We found that the average particle size of the dispersed gold nanoparticles can be controlled by changing the plasma discharge voltage of APD. Accordingly, the amount of loaded gold on the $TiO_2$ powder increased with increasing discharge voltage, but the specific surface area of the Au/$TiO_2$ samples decreased. As for catalytic reactivity, Au/$TiO_2$ showed a higher catalytic activity than Pt/$TiO_2$ in CO oxidation. The catalytic activity of the Au/$TiO_2$ samples showed size dependence where higher catalytic activity occurred on smaller gold nanoparticles. The study suggests that APD is a simple way to fabricate catalytically active nanocatalysts.

• 산업기술연구
• /
• 제24권B호
• /
• pp.133-138
• /
• 2004

The photodegradation of phenol and toluene with the $TiO_2$-coated polyethylene (PE) particles were investigated in the slurry type photocatalytic reactor, changing the $TiO_2$ particle sizes, initial phenol and toluene concentrations, and the oxygen flow rate. The nano-sized $TiO_2$ photocatalyst particles were prepared by the diffusion flame reactor and they were coated onto PE particles by using the hybridization system for the efficient recollection of $TiO_2$-coated particles after photodegradation experiments. The degradation efficiencies of phenol and toluene with the $TiO_2$-coated PE particles were more than 90% after photodegradation of 80 minutes for most cases. The efficiencies of photodegradation with the $TiO_2$-coated PE particles were found to be lower than those by the pure $TiO_2$ particles by 50%, because of the decrease in specific surface area of $TiO_2$ particles in PE particles.

• 한국재료학회지
• /
• 제14권9호
• /
• pp.634-641
• /
• 2004

The photocatalytic performance of $TiO_2$ thin films coated on porous alumina balls using various aqueous $TiOCl_2$ solutions as starting precursors, to which 1.0 $mol\%$ transition metal ($Ni^{2+},\;Cr^{3+},\;Fe^{3+},\;Nb^{3+},\;and\;V^{5+}$) chlorides had been already added, has been investigated, together with characterizations for $TiO_2$ sols synthesized simultaneously in the same autoclave through hydrothermal method. The synthesized $TiO_2$ sols were all formed with an anatase phase, and their particle size was between several nm and 30 nm showing ${\zeta}-potential$ of $-25{\sim}-35$ mV, being maintained stable for over 6 months. However, the $TiO_2$ sol added with Cr had a much lower value of -potential and larger particle sizes. The coated $TiO_2$ thin films had almost the same shape and size as those of the sol. The pure $TiO_2$ sol showed the highest optical absorption in the ultraviolet light region, and other $TiO_2$ sols containing $Cr^{3+},\;Fe^{3+}\;and\;Ni^{2+}$ showed higher optical absorption than pure sol in the visible light region. According to the experiments for removal of a gas-phase benzene, the pure $TiO_2$ film showed the highest photo dissociation rate in the ultraviolet light region, but in artificial sunlight the photo dissociation rate of $TiO_2$ coated films containing $Cr^{3+},\;Fe^{3+}\;and\;Ni^{2+}$ was measured higher together with the increase of optical absorption by doping.

• 공업화학
• /
• 제29권6호
• /
• pp.657-662
• /
• 2018

본 연구에서는, $Pt/TiO_2$ 촉매의 물리화학적 특성이 CO 상온산화 반응에 미치는 영향을 조사하기 위하여 각기 다른 물리적 특성을 가지는 다양한 $TiO_2$ 지지체를 이용하여 $Pt/TiO_2$ 촉매를 제조한 후 평가하였다. 촉매의 물리화학적 특성을 조사하기 위하여 XPS, CO-chemisorption, BET, CO-TPD 분석을 수행하였다. 그 결과, active particle diameter가 작을수록, metal dispersion, surface area가 클수록 우수한 CO 상온산화 반응을 나타내었다. 이러한 물리적 특성은 active site의 수를 증진시켜 대상물질은 CO의 흡착량의 증가를 야기시켰다. 또한, $O_2$-consumption이 클수록 우수한 산소 전달 능력을 통해 보다 높은 CO 상온산화 반응활성을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.286-287
• /
• 2006

Barium titanate ($BaTiO_3$) glycolate particles were synthesized at temperature as low as $100^{\circ}C$ through glycothermal reaction by using $Ba(OH)_2{\cdot}8H_2O$ and amorphous titanium hydrous gel as precursors and ethylene glycol as solvent. The particle size and morphology of $BaTiO_3$ glycolate powders can be controlled by varying the reaction conditions such as the reaction temperature and Ba:Ti molar ratio of starting precursors. After glycothermal treatment at $220^{\circ}C$ for 24 h in 1.25:1(Ba:Ti), the average particle size of the $BaTiO_3$ glycolate powder was about 200-400 nm and low agglomeration. $BaTiO_3$ powders were formed by heat-treating the glycolate powder in air at $500-1000^{\circ}C$. As a result, the size of $BaTiO_3$ crystallites changed from around 50-300 nm. It is also demonstrated that the size and shape of $BaTiO_3$ particles investigated as a function of calcination temperature. The $BaTiO_3$ particles obtained from optimum synthesis condition were pressed, sintered and measured for the dielectric property. The $BaTiO_3$ ceramics sintered at $1250^{\circ}C$ for 2 h had 98 % of theoretical density. The ceramics have an average grain size of about $1\;{\mu}m$ and displays the high dielectric constant (~3100) and low dielectric loss (<0.1) at room temperature.