• 제목/요약/키워드: $TiOF_2$

검색결과 10,625건 처리시간 0.038초

Transfer Matrix를 사용하여 예측한 $TiO_2$/Ag/$TiO_2$ 박막의 광학적 성질 및 스퍼터 증착된 박막과의 특성 비교 (Prediction of the optical properties of $TiO_2$/Ag/$TiO_2$ films using transfer matrix and comparisions with real transmittance measured on the sputter-deposited films)

  • 김진일;김진현;김영환;오태성
    • 한국재료학회지
    • /
    • 제5권1호
    • /
    • pp.140-148
    • /
    • 1995
  • Transfer matrix를 사용하여 $TiO_{2}$ 및 Ag 단일 박막과 $TiO_{2}/Ag/TiO_{2}$ 다층 박막의 두계에 따른 투과도 특성을 예측하였으며, 이를 실제 스퍼터 증착하여 제조한 박막의 광학 특성과 비교하였다. $TiO_{2}$ 및 Ag 박막에서는 복소굴절률을 사용하므로써 실제 증착박막에서 측정된 특성과 근접한 투과도 곡선의 예측이 가능하였다. $TiO_{2}/Ag/TiO_{2}$ 3층 박막의 광학 특성은 Ag의 $TiO_{2}$층으로의 확산 및 응집에 의해 transfer matrix로 예측한 투과도 특성과 전혀 다른 거동을 나타내었다. 그러나 4nm 및 6nm 두계의 Ti 박막을 확산방지층으로 증착한 Ti$O_{2}$/Ti/Ag/Ti/Ti$O_{2}$ 구조의 5층 박막에서는 transfer matrix를 사용하여 예측한 $TiO_{2}/Ag/TiO_{2}$ 3층 박막의 투과도 곡선과 유사한 광학 특성을 얻을 수 있었다.

  • PDF

Ti-6Al-4V, Ti-4Fe, Ti-(1,2)Si합금의 고온산화 (High Temperature Oxidation of Ti-6Al-4V, Ti-4Fe, Ti-(1,2)Si Alloys)

  • 박기범;이동복
    • 한국표면공학회지
    • /
    • 제34권2호
    • /
    • pp.135-141
    • /
    • 2001
  • Arc-melted Ti-6Al-4V, Ti-4Fe and Ti-(1,2) Si alloys were oxidized at 700, 800, 900 and $1000^{\circ}C$ in air. The oxidation resistance of Ti-4Fe was comparable to that of Ti-6Al-4V, while the oxidation resistance of Ti-(1,2) Si was superior to that of Ti-6Al-4V. Ti-2Si displayed the best oxidation resistance among the four alloys, but failed after oxidation at $1000^{\circ}C$ for 17h. The oxide scale formed on Ti-6Al-4V, Ti-4Fe and Ti-(1,2)Si consisted of ($TiO_2$ and a small amount of $Al_2$$O_3$), ($TiO_2$ and a small amount of dissolved iron), and ($TiO_2$ plus a small concentration of amorphous $SiO_2$), respectively. The oxide grains of the surface scale of the four alloys were generally fine and round.

  • PDF

Rapid Synthesis and Consolidation of Nanostructured Ti-TiC Composites from TiH2 and CNT by Pulsed Current Activated Heating

  • Park, Na-Ra;Shon, In-Jin
    • 한국재료학회지
    • /
    • 제25권1호
    • /
    • pp.48-53
    • /
    • 2015
  • $TiH_2$ nanopowder was made by high energy ball milling. The milled $TiH_2$ and CNT powders were then simultaneously synthesized and consolidated using pulsed current activated sintering (PCAS) within one minute under an applied pressure of 80 MPa. The milling did not induce any reaction between the constituent powders. Meanwhile, PCAS of the $TiH_2$-CNT mixture produced a Ti-TiC composite according to the reaction ($0.92TiH_2+0.08CNT{\rightarrow}0.84Ti+0.08TiC+0.92H_2$, $0.84TiH_2+0.16CNT{\rightarrow}0.68Ti+0.16TiC+0.84H_2$). Highly dense nanocrystalline Ti-TiC composites with a relative density of up to 99.7% were obtained. The hardness and fracture toughness of the dense Ti-8 mole% TiC and Ti-16 mole% TiC produced by PCAS were also investigated. The hardness of the Ti-8 mole% TiC and Ti-16 mole% TiC composites was higher than that of Ti. The hardness value of the Ti-16 mole% TiC composite was higher than that of the Ti-8 mole% TiC composite without a decrease in fracture toughness.

Ti3O5/SiO2 다층박막를 이용한 협대역 칼라투과필터 제작 및 특성연구 (The Fabrication and Characteristic for Narrow-band Pass Color-filter Deposited by Ti3O5/SiO2 Multilayer)

  • 박문찬;고견채;이화자
    • 한국안광학회지
    • /
    • 제16권4호
    • /
    • pp.357-362
    • /
    • 2011
  • 목적: $Ti_3O_5$$SiO_2$를 이용하여 중심파장이 500 nm에서 반치폭이 약 12 nm이고 투과율이 99%인 협대역 칼라투과필터를 제작하고, 이 칼라필터의 박막 특성을 연구하고자 한다. 방법: 두께 800 nm인 $Ti_3O_5$박막과 $SiO_2$박막의 투과율로부터 박막의 광학상수 n(굴절률)과 k(소멸계수)를 구하였고, Essential Macleod program을 이용하여 중심파장이 500 nm에서 반치폭이 약 12 nm이고 투과율이 99%인 협대역 칼라투과필터의 필터층과 AR 코팅층을 설계하였다. 또 한 electron beam evaporation 장치를 이용하여 $Ti_3O_5/SiO_2$ 다층막 칼라필터을 만든 후, 분광광도계를 이용하여 투과율을 측정하였고, SEM 사진에 의한 칼라필터의 단면으로부터 칼라필터의 박막두께와 층수를 알 수 있었고, XPS분석으로부터 박막 성분을 분석하였다. 결과: 칼라필터의 AR 코팅층의 최적조건은 6층으로 [air$|SiO_2(90)|Ti_3O_5(36)|SiO_2(5)|Ti_3O_5(73)|SiO_2(30)|Ti_3O_5(15)|$ glass]이며, 반치폭이 12 nm인 칼라필터의 필터층의 최적조건은 41층으로 [air$|SiO_2(20)|Ti_3O_5(64)|SiO_2(102)|Ti_3O_5(66)|SiO_2(112)|Ti_3O_5(74)|SiO_2(120)|Ti_3O_5(68)|SiO_2(123)|Ti_3O_5(80)|SiO_2(109)|Ti_3O_5(70)|SiO_2(105)|Ti_3O_5(62)|SiO_2(99)|Ti_3O_5(63)|SiO_2(98)|Ti_3O_5(51)|SiO_2(60)|Ti_3O_5(42)|SiO_2(113)|Ti_3O_5(88)|SiO_2(116)|Ti_3O_5(68)|SiO_2(89)|Ti_3O_5(49)|SiO_2(77)|Ti_3O_5(48)|SiO_2(84)|Ti_3O_5(51)|SiO_2(85)|Ti_3O_5(48)|SiO_2(59)|Ti_3O_5(34)|SiO_2(71)|Ti_3O_5(44)|SiO_2(65)|Ti_3O_5(45)|SiO_2(81)|Ti_3O_5(52)|SiO_2(88)|$ glass] 이었다. 위의 데이터를 이용하여 제작한 칼라필터는 SEM 사진에 의해 41층으로 확인되었으며, XPS 분석에 의해 $SiO_2$층이 맨 위층이며 $Ti_3O_5$층과 교번인 다층막으로 형성돼 있으며, $Ti_3O_5$박막 형성 시 TiO2 박막과 $Ti_3O_5$박막이 섞여 형성됨을 알 수 있었다. 결론: 41층의 $Ti_3O_5/SiO_2$ 다층박막을 이용하여 12 nm 반치폭을 갖으며 500 nm 중심파장에서 투과율은 99%인 협대역 칼라투과필터를 제작하였으며, 이 칼라필터는 $Ti_3O_5$박막 형성 시 TiO2 박막과 $Ti_3O_5$박막이 섞여 형성됨을 알 수 있었다.

Ti-Si 계면의 얇은 산화막이 TiN/TiS$i_2$ 이중구조막 형성에 미치는 영향 (Effects of the thin SiO$_{2}$ film at the Ti-Si interface on the formation of TiN/TiS$i_2$ bilayer)

  • 이철진;성만영;성영권
    • 대한전기학회논문지
    • /
    • 제45권2호
    • /
    • pp.242-248
    • /
    • 1996
  • The properties of TiN/TiSi$_{2}$ bilayer formed by a rapid thermal annealing is investigated when thin SiO$_{2}$ film exists at the Ti-Si interface. The competitive reaction for the TiN/TiSi_2 bilayer occurs above 600 .deg. C. The thickness of the TiSi$_{2}$ layer decreases with increasing SiO$_{2}$ film thickness and also decreases with increasing anneal temperture When the competitive reaction for the TiN/TiSi$_{2}$ bilayer is occured by rapid thermal annealing, the composition of TiN layer represents TiN$_{x}$O$_{y}$ due to the SiO$_{2}$ layer at the Ti-Si interface but the structures of the TiN and TiSi$_{2}$ layers were not changed.d.d.

  • PDF

Phase Orientation of TiC-$TiB_2$-SiC Ternary Eutectic Composite Prepared by an FZ Method

  • Tu, Rong;Li, Wenjun;Goto, Takashi
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.859-860
    • /
    • 2006
  • TiC-$TiB_2$-SiC system was a ternary eutectic, whose eutectic composition was 34TiC-$22TiB_2$-44SiC (mol%). TiC-$TiB_2$-SiC ternary eutectic composite were synthesized by a floating zone method using TiC, $TiB_2$ and SiC powders as starting materials. The TiC-$TiB_2$-SiC eutectic composite showed a lamellar texture. TiC(022), $TiB_2(010)$ and SiC(111) of the eutectic composite were perpendicular to the growth direction. TiC-$TiB_2$-SiC ternary eutectic composite had specific relationship among the crystal planes: TiC[011]//$TiB_2[010]$//SiC[112], TiC(200)//$TiB_2$(001)//SiC(402) and $TiC(1\bar{1}1)$//$TiB_2(101)$//SiC(220).

  • PDF

$Si_3N_4-TiC$ Ceramic 공구에 화학증착된 TiC, TiN 및 Ti(C, N)에 관한 연구 (A Study on the Chemically Vapor Deposited TiC, TiN, and TiC(C, N) on $Si_3N_4$-TiC Ceramic Tools.)

  • 김동원;김시범;이준근;천성순
    • Tribology and Lubricants
    • /
    • 제4권2호
    • /
    • pp.36-43
    • /
    • 1988
  • Titanium carbide(TiC) and titanium nitride(TiN) flims were deposited on $Si_3N_4$-TiC composite cutting tools by chemical vapor deposition(CVD) using $TiCl_4-CH_4-H_2$ and $TiCl_4-H_2-N_2$ gas mixtures, respectively. The nonmetal to metal ratio of deposit increases with increasing $m_{C/Ti}$(mole ratio of CH$_4$ to TiCl$_4$ in the input) for TiC coatings and $m_{N/Ti}$(mole ratio of N$_2$ to TiCl$_4$ in the input) for TiN coatings. The nearly stoiahiometric films could be obtained under the deposition condition of $m_{C/Ti}$ between 1.15 and 1.61 for TiC, and that of $m_{N/Ti}$ between 25 and 28 for TiN. Also maximum microhardness of the coatings can be obtained in these ranges. The interfacial region of TiC coatings on $Si_3N_4$-TiC ceramics is wider than that of TiN coatings according to Auger depth profile analysis, which indicates good interfacial bonding for TiC. Experimental results show that TiC coatings have an randomly equiaxed structure and Columnar structure with(220) preferred orientation can be obtained for TiN coatings. And, multilayer coatings have a dense and equiaxed structure.

BaCO3-TiO2계의 고상반응에 관한 연구 (A Study on Solid Reaction of BaCO3-TiO2 System)

  • 이응상;황성연;임대영
    • 한국세라믹학회지
    • /
    • 제24권5호
    • /
    • pp.484-490
    • /
    • 1987
  • Diffusion coupling experiment was done to study expansion of body and soild reaction in BaCO3-TiO2 system. Specimen of BaCO3 and TiO2 was formed with Pt-mark's method. Each specimen was fired at interval of 25℃ from 900℃ to 1000℃ for 2hrs. After that, specimen was fixed with resin and polished. Product layers of specimen were observed with SEM and EDS. The result were following; 1. Diffusion component is Ba2+, which diffuse toward TiO2. 2. Large crack between layer of BaCO3 and Ba2TiO4 was generated because of difference of thermal expansion coefficient. 3. Ba2TiO4 is formed to TiO2 body by the reaction of BaTiO3 and BaO and its structure is very porous. 4. BaTiO3 changes immediately to Ba2TiO4 by the reaction of BaO. But BaTiO3 which formed by the reaction of TiO2 and Ba2TiO4 exsists as layer because the diffusion distance of Ba2+ is far.

  • PDF

Photodecomposition of Concentrated Ammonia over Nanometer-sized TiO2, V-TiO2, and Pt/V-TiO2 Photocatalysts

  • Choi, Hyung-Joo;Kim, Jun-Sik;Kang, Mi-Sook
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권4호
    • /
    • pp.581-588
    • /
    • 2007
  • To enhance the photodecomposition of concentrated ammonia into N2, Pt/V-TiO2 photocatalysts were prepared using solvothermal and impregnation methods. Nanometer-sized particles of 0.1, 0.5 and 1.0 mol% V-TiO2 were prepared solvothermally, and then impregnated with 1.0 wt% Pt. The X-ray diffraction (XRD) peaks assigned to V2O5 at 30.20 (010) and Pt metal at 39.80 (111) and 46.20 (200) were seen in the 1.0 wt% Pt/ 10.0 mol% V-TiO2. The particle size increased in the order: pure TiO2, V-TiO2 and Pt/V-TiO2 after thermal treatment at 500 °C, while their surface areas were in the reverse order. On X-ray photoelectron spectroscopy (XPS), the bands assigned to the Ti2p3/2 and Ti2p1/2 of Ti4+-O were seen in all the photocatalysts, and the binding energies increased in the order: TiO2 < Pt/V-TiO2 < V-TiO2. The XPS bands assigned to the V2p3/2 (517.85, 519.35, and 520.55 eV) and V2p1/2 (524.90 eV) in the V3+, V4+ and V5+ oxides appeared over V-TiO2, respectively, while the band shifted to a lower binding energy with Pt impregnation. The Pt components of Pt/ V-TiO2 were identified at 71.60, 73.80, 75.00 and 76.90 eV, which were assigned to metallic Pt 4f7/2, PtO 4f7/2, PtO2 4f7/2, and PtO 4f5/2, respectively. The UV-visible absorption band shifted closer towards the visible region of the spectrum in V-TiO2 than in pure TiO2 and; surprisingly, the Pt/V-TiO2 absorbed at all wavelengths from 200 to 800 nm. The addition of vanadium generated a new acid site in the framework of TiO2, and the medium acidic site increased with Pt impregnation. The NH3 decomposition increased with the amount of vanadium compared to pure TiO2, and was enhanced with Pt impregnation. NH3 decomposition of 100% was attained over 1.0 wt% Pt/1.0 mol% V-TiO2 after 80 min under illumination with 365 nm light, although about 10% of the ammonia was converted into undesirable NO2 and NO. Various intermediates, such as NO2, -NH2, -NH and NO, were also identified in the Fourier transform infrared (FT-IR) spectra. From the gas chromatography (GC), FT-IR and GC/mass spectroscopy (GC/MS) analyses, partially oxidized NO and NO2 were found to predominate over V-TiO2 and pure TiO2, respectively, while both molecules were reduced over Pt/V-TiO2.

확산방지막에 따른 $TiO_2/M/Ag/M/TiO_2$ 투명 열절연 박막의 광학적 성질 (Optical Properties of $TiO_2/M/Ag/M/TiO_2$ Films with Different Diffusion Barrier Layers)

  • 이경준;이진구;박주동;김진현;김영환;오태성
    • 한국진공학회지
    • /
    • 제5권2호
    • /
    • pp.147-155
    • /
    • 1996
  • Optical properties of $TiO_2/M/Ag/M/TiO_2$ films have been changed with the diffusion barrier metal M. Optimum opticla properties of $TiO_2/M/Ag/M/TiO_2$ as the transparent heat mirror film, could be obtained with Ti among diffusion barrier metals of Ti, Cu, Zr and Al. $TiO_2/M/Ag/M/TiO_2$ film, which was fabricated by sputtering of 18 nm-thick $TiO_2$ and Ag, and 4nm-thick Ti, showed maximum transimittance of 89% at visible wavelength and infrared reflectance of 97% at wavelength of 3000 nm. Optical properties of this film was not degraded by Xenon-sunshine weather test for 240 hours. For specimens with barrier layers of Cu, Zr, and Al, degradation of optical properties by weather test was increased in a sequence of films with Cu, Zr, and Al barrier layers.

  • PDF