• Korean Chemical Engineering Research
• /
• 제57권5호
• /
• pp.714-722
• /
• 2019

산 염기성질이 다양하게 존재하는 담체($SiO_2-Y_2O_3$, $Al_2O_3$, $SiO_2-ZrO_2$, $SiO_2$, $TiO_2$, MgO) 상에 17 wt% Ni을 고정한 상태에서 함침법을 사용하여 촉매를 제조하여 수소 존재 하에 에탄올과 암모니아의 환원성 아민화 반응에 대한 촉매활성을 비교 평가하였다. 반응 전후에 있어 사용된 촉매는 X-선 회절, 질소 흡착, 에탄올-승온탈착(EtOH-TPD), 이소프로판올-승온탈착(IPA-TPD), 수소 화학흡착을 사용하여 특성분석을 수행하였다. pH 9.5 이상에서 침전법을 사용하여 $ZrO_2$와 $Y_2O_3$ 담체 제조 시 파이렉스 반응기에서 미량의 Si 용융으로 인해 $SiO_2-ZrO_2$와 $SiO_2-Y_2O_3$ 복합 산화물이 각각 생성되었다. 사용된 촉매 중에서 $Ni/SiO_2-Y_2O_3$ 촉매가 가장 좋은 활성을 보였으며 이는 높은 니켈 분산도와 EtOH-TPD와 IPA-TPD에서의 낮은 탈착온도 등과 밀접한 관련이 있었다. Ni/MgO 촉매상에서의 낮은 촉매 활성은 NiO-MgO 고형물 형성에 기인한 것으로 보이며, $Ni/TiO_2$ 경우에서는 담체-금속 간의 강한 상호 작용으로 인해 낮은 니켈 금속 상 존재로 인해 반응성이 낮게 나왔다. $TiO_2$와 MgO 이외의 담체를 사용한 경우에 있어서 유사한 에탄올 전환율에서의 에틸아민류와 아세토니트릴 선택도는 큰 차이를 보이지 않았다.

• Corrosion Science and Technology
• /
• 제5권4호
• /
• pp.149-152
• /
• 2006

$BaTiO_3$ coatings were prepared by micro arc oxidation (MAO) method. Only $Ba(OH)_2$ was dissolved in the electrolyte and process time was less than 30 min. Commercial purity $Ba(OH)_2$ (97%) containing $BaCO_3$ as impurity was used in preparing the electrolyte. XRD showed that the coating was composed of largely $BaTiO_3$, and in some process conditions, small quantity of impurity, $BaCO_3$, was characterized in the coating layer. The quantity of $BaCO_3$ could be controlled to negligible quantity by regulating the applied voltage and duration time of the MAO process.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2006년도 춘계학술발표대회 및 제10회 신소재 심포지엄 논문개요집
• /
• pp.23.2-23.2
• /
• 2006

• 대한화학회지
• /
• 제37권4호
• /
• pp.401-407
• /
• 1993

티타늄 금속판을 공기산화와 수증기 산화하여 만든 $TiO_{2-x}$ 박막을 전극으로 사용하여 1M NaOH 용액에서 전기화학적 성질을 연구하였다. 순환 전압 전류법에 의한 산소의 환원전위는 SCE에 대해 -0.9 ∼ -1.0 V 근처에서 나타났으며 이들 반응은 전체적으로 비가역적으로 진행되었다. 수증기 산화법에 의해 제조된 $TiO_{2-x}$ 전극들의 전기화학적 성질들은 공기 산화법에 의해 제조된 것과 다르게 나타났으며 900$^{\circ}$이상의 온도에서 제조된 전극들은 단결정 $TiO_2$ 전극들의 전기화학적 성질과 비슷하였다. $TiO_{2-x} $전극에서 산소위 환원전위는 flat band 전위보다 더 양전위 쪽에서 나타났으며 pH 증가에 따라 60mV/pH 정도 감소되었다.

• 한국재료학회지
• /
• 제15권7호
• /
• pp.444-447
• /
• 2005

In this study, $Hydroxyapatite+TiO_2(HAp+TiO_2)$ composite sol coatings on Cp-Ti substrates were deposited by using a sol-gel derived precursor. Prior to hydroxyapatite coating, the samples were micropolished and divided into three sets. The first set was coated with hydroxyapatite (HAp) directly on Cp-Ti. The second set was first coated with intermediate titania layer and then coated with HAp. The third set samples were coated with $HAp+TiO_2$ (50:50) composite sol. Each samples were predried at $200^{\circ}C$, and heat treated at $600^{\circ}C$. The formation of hydroxyapatite has been confirmed by XRD analyses and the substrate material was found to be oxidized with negligible amount of CaO in the coating. The NaOH treated samples showed the presence of rutile crystal. The SEM studies revealed surface morphologies of each samples. $HAp+TiO_2$ composite sol coating layer was found to be smooth. The bonding strength of each samples were calculated using pull out tests. The bonding strength of the $HAp+TiO_2$ composite sol coating on substrate was 29.35MPa.

• 한국수소및신에너지학회논문집
• /
• 제4권2호
• /
• pp.5-15
• /
• 1993

Hydrogen production in visible light with the following semiconductor systems, $CdS-WO_3$, $CdS-TiO_2$, have been investigated in the presence of redox catalyst (Pt, $RuO_2$). MeOH, EtOH, isopropanol, sulfide/sulfite mixture, lactic acid were used as sacrifical reagents. The optimal condition for $H_2$ evolution was found to be in qgueous lactic acid media for $CdS-WO_3/RuO_2$. The photochemical efficiency for this system was 1.05 % and the $H_2$ evolution rate was 26.5ml/min. at $6.07{\times}10^{-5}$ einstein/sec photon rate

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.150-152
• /
• 2009

본 연구는 염료감응형 태양전지에 적용되는 TiO2 나노입자를 개선하여 3차원적인 nanobranch를 수열법으로 합성하여 전자의 이동을 향상시키며, 비표면적을 늘려 효율향상을 위하여 전극 구조를 제어하였다. nanobranch의 seed인 nanowire를 XRDd, FE-TEM과 solar simulator를 이용하여 비교 분석하였다.

• 한국세라믹학회지
• /
• 제20권1호
• /
• pp.31-36
• /
• 1983

The photoelectrochemical conversion by polycrystalline $TiO_2$ electrodes is effected by applied voltage oxidized $TiO_2$ thickness temperature and concentration of a, P. E. C cell. Anodic current starts at -0.8V in 1N-NaOH solu-tion and photocurrent appears around 420nm frequency. And the emf of the cell drops with the rate of 58.5mV/PH.

• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.19-24
• /
• 1985

The phtoelectrochemical porperties of $Nb_2O_5$, $Sb_2O_3$ and $V_2O_5$ doped and pure $SrTiO_3$ ceramic electodes were investigated. Shapes of I-V and I-λ characteristics of the pure $SrTiO_3$ ceramic electrode are similar to those of SrTiO3 single crystal electorde ; the anodic current strats at -0.9V (vs. Ag/AgCI) in 1 N-NaOH aqueous solution and the photoresponse appears at a wavelength of about 390nm and the quantum efficiency is about 3.5% at wavelength of 390nm under 0.5V vs. Ag/AgCl. Photocurrents of $Nb_2O_5$, $Sb_2O_3$ and $V_2O_5$ doped electrodes and $V_2O_5$ doped ceramic electrode appears at wavelength of 390nm and 500nm respectively.

• 청정기술
• /
• 제28권2호
• /
• pp.147-154
• /
• 2022

Titanate nanotubes (TNTs) were synthesized via alkaline hydrothermal treatment using commercial TiO₂ nanoparticles (P25). The TNTs were prepared at various TiO₂/NaOH ratios, hydrothermal temperatures, and hydrothermal times. The synthesized catalysts were characterized by X-ray diffraction, field-emission scanning electron microscopy, N₂ adsorption-desorption isotherms, field-emission transmission electron microscopy, and ultraviolet-visible spectroscopy. TNTs were generated upon a decrease in the TiO₂/NaOH ratio due to the dissolution of TiO₂ in the alkaline solution and the generation of new Ti-O-Ti bonds to form titanate nanoplates and nanotubes. The hydrothermal treatment temperature and time were important factors for promoting the nucleation and growth of TNTs. The TNT catalyst with the largest surface area (389.32 m² g^-1) was obtained with a TiO₂/NaOH ratio of 0.25, a hydrothermal treatment temperature of 130 ℃, and a hydrothermal treatment time of 36 h. Additionally, we investigated the photocatalytic activity of methyl violet 2B (MV) over the TNT catalysts under UV irradiation and found that the degradation efficiencies of the TNTs were higher than that of P25. Among the TNT catalysts, the TNT catalyst that was hydrothermally synthesized for 36 h (TNT 36 h) exhibited a 96.9% degradation efficiency and a degradation rate constant that was 4.8 times higher than P25 due to its large surface area, which allowed for more contact between the MV molecules and TNT surfaces and facilitated rapid electron transfer. Finally, these results were correlated with the specific surface area.