• Korean Journal of Comparative Education
• /
• v.18 no.4
• /
• pp.141-162
• /
• 2008

Many e-learning programs in Korea use lecture as a main instructional method. A meta-analysis study reports that e-learning programs using lectures were the most ineffective. In addition, many researchers in the field of distance education contend that the active participation of learners is the key to the success of e-learning. These imply why we can easily find many people who don't have good impression about e-learning. The quality of e-learning depends on the application of appropriate pedagogy. This study aims to present the implications for the improvement of e-learning programs in the Republic of Korea by analyzing the psychological characteristics reflected on the e-learning programs in the U. S. that have been improved through design research for a long time. The result shows that the e-learning programs in the U. S. have five major psychological aspects, i.e., reflective thinking, collaborative interaction, knowledge construction, situated action, and utilizing multiple representations. Consequently, this study suggests that e-learning programs in the Republic of Korea need to reflect learning principles such as learning by doing, situated learning, collaborative learning, learning with multiple representations in order to improve the quality.

• Journal of Animal Science and Technology
• /
• v.44 no.2
• /
• pp.239-250
• /
• 2002

Evaluation works of oat in mixture with rye on forage yield have not been reported. The objective of this study was to determine yield and quality of forage mixture as affected by maturity of rye cultivar and oat-rye seeding rate at Suweon from 1999 to 2000. The experiment was arranged in a split plot design with three replications. Main plots consisted of maturity of rye. such as early(cv. Koolgrazer) and late(cv. Kodiak)maturing cultivars. Sub-plots consisted of seeding rate (T1: Oat 2000 and rye 0kg/ha, Ts: Oat 150 and rye 40kg/ha, T3: Oat100 and rye 80kg/ha, T4: Oat50 and rye 120kg/ha. and T5: Oat0 and rye 160kg/ha). Crude protein(CP) content of oat-rye mixture harvested in the fall was not influenced by maturity of rye cultivar, but that of oat-rye mixture was increased from 13.6 to 19.3% as the seeding rate of rye increased(P<0.05), however, maturity of rye cultivar significantly affected CP content of oat-rye mixture in the spring(P<0.01). Acid detergent fiber(ADF) content of oat-rye mixture harvested in the spring was not significantly affected by rye cultivar, but the ADF was decreased from 27.8 to 20.7% as the seeding rate of rye increased(P$<$0.01). When rye was harveste in the spring, ADF content of late maturing cultivar 'Kodiak' was shown as 28.0%. This was lower than that of early maturing cultivar 'Koolgrazer' which was shown as 35.8%(P$<$0.01). Among treatments, neutral detergent fiber(NDF) and in vitro dry matter digestibility(IVDMD) of oat-rye mixture showed a similar trend made on ADF. In this experiment, the highest forage yield (12.356kg/ha) was obtained from early maturing rye cultivar and seeding rates of 100kg/ha of oat and 80kg/ha of rye mixture. A significant interaction between maturity of rye cultivar and seeding rate was found(P$<$0.01). The above results indicate that an early maturing rye cultivar at the seeding rate of 100kd/ha in mixtures with 80kg/ha of oat could be recommended as a succeeding cropping system after corn for silage.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.65-75
• /
• 1993

원자력발전소에서 발생하는 고장정지 사건에 내포된 인적오류의 발생내용을 흥미있고 현장감 있게 묘사시킴과 동시에 종사원들의 인적오류를 저감시키기 위한 새로운 교육훈련방 법으로써 멀티미디어 기술의 사용을 고려하였다. 즉, 컴퓨터 환경하에서 숫자와 텍스트, 음 향 및 음성, 그래픽, 애니메이션, 화상 등의 미디어를 사용하여 인적오류로 인한 고장정지 사건발생의 내용을 전달하는 새로운 교육훈련 방법을 사용하는 것이다. 이를 위하여 고장정 지 사건과 관련한 원자력발전소 구성정보와 종사원의 활동정보를 입출력하기 위한 멀티미디어 인터페이스를 설계하였다. 설계는 멀티미디어 제공환경 구축과 인터페이스 운영논리 설정의 두단계로 구성한 절차에 따라 수행하였다. 멀티미디어 인터페이스는 원자력발전소 구성정보를 설계하여 저장시켜둔 퍼스널 컴퓨터 환경하에서 운영되며, 입력 및 출력의 두가지 인터페이스 를 갖는다. 입력 인터페이스는 인적 오류를 포함한 고장정지 사건의 발생내용을 숫자, 텍스트, 음성 미디어로 받아들여 출력 인터페이스에서 사용될 수 있도록 미디어 결합을 수행하고, 컴퓨터 저장장치에 저장하는 기능을 수행한다. 출력 인터페이스는 저장장치에 기록된 내용을 판독하여 고장정지의 진행경위와 인적오류의 발생내용을 숫자, 문자, 텍스트, 음성, 음향, 그래픽 애니메 이션, 정지화상으로 원자력발전소 종사원들에게 출력시켜 주는 기능을 수행한다. 멀티미디어 출력정보는 사용자가 CRT 화면에 제공되는 버튼 또는 Click Touch 메뉴를 사용함에 따라 이전, 이후의 출력정보로 전이할 수 있도록 하였다.상대적으로 중요한 검사 항목으로 나타났다. 또한 상대적 중요도 결과를 적용한 적성검사 성적이 적용하지 않은 적성검사 성적에 비해 비행성적에 대한 예측 능력이 좋은 것으로 평가되었다.al age)가 있다는 것을 의미하는 것이다. 한편, 생산현장에서는 자동화, 기계화가 진보되어 육체적인 노동이 경감된 결과, 중고령자라도 할 수 있는 작업이 많아지고 있다. 또, VDT (Visual Dislay Terminal) 작업과 같은 정보처리 작업의 수요가 증가하여 그 인재의 부족이 지적되고 있다. 따라서 중고령자의 기능을 조사하여 어떠한 작업에 적합한가를 판단하는 것이 중요한 과제로 되었다. 그러나 노동에는 많은 기능이 관여 하고, 그 내용에 따라서 요구되는 기능이 서로 다르기 때문에 노동적응능력의 기본적인 기능으로 보여지는 것에 좁혀서 작업능력의 연령증가 변화에 대하여다원적 평가를 하는 것이 실제적이라고 할 수 있다. 따라서 본 연구에서는 인간이 가지고 있는 다수의 기능중에서 수지교 치성과 연령증가와의 관계를 조사한다. 만약 연령증가 만으로 수지교치성을 평가 할 수 없는 경우에는 어떠한 요인이 수지기민성의 변화에 영향을 미치는가를 검토한다.t list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.10a
• /
• pp.15-15
• /
• 2003

치과재료에 사용되는 금속재료는 주로 스테인리스강, 타이타늄, Ni-Ti, Co-Cr등과 같은 특수합금이 주로 사용되고 있다. 이들 재료는 치과 보철물과 교정재료 및 충전재료로 주로 사용되고 있으며 그 외 치과에서 사용되는 기기나 기구에도 많이 활용되고 있다. 특히 치과 보철물을 사용하여 치료를 원하는 환자가 최근에 급격히 증가하면서 임플란트 고정체와 나사 등을 이용한 치료법의 연구와 개발이 필요하게 되어 세계적으로 연구와 투자가 활발히 진행되고 있다. 그러나 재료의 설계나 합금의 설계 및 제품의 설계상의 문제로 인하여 생체조직과 결합하는데 많은 문제점이 임상적으로 발생되고 있다. 즉 임플란트 표면의 생체적합성부여, 고정체와의 결합시 파절이나 풀림현상, 골에 고정체로 사용하는 나사의 강도와 내마모성문제 등이 개선되어야 할 문제점으로 남아있다. 또한 총의치에 사용되는 자석 어태치먼트의erosion-corrosion문제, 교정선의 탄성 과 마모저항문제 등은 앞으로 계속적인 연구를 행하여야할 과제로 남아있다. 또한 국소의치에서 사용되는 frame은 정밀주조법을 통하여 제조하며 주조상의 결함 등으로 인한 클라스프의 파절 문제점이 발생되고 있다. 따라서 본 연구에서는 치과재료로 사용되는 임플란트 고정체, 나사, 교정용 선등의 문제점을 고찰하고, 지금까지 이루어진 연구를 중심으로 최적의 개선 조건을 찾고자하였다. 최근첨단소재 및 금속재료를 사용하여 치과재료 합금을 설계할 수 있는 연구가 활발히 진행된다면 수입에 의존하고 있는 고가의 치과재료를 값이 싼 고성능의 제품으로 대체할 수 있는 효과가 클 것으로 생각된다.>$\rho$$\sub$0/=1.8 %. As t$\sub$Co/ increases, a transition from the regime of co-existence of superparamagnetic and ferromagnetic behaviors to ferromagnetic behavior was observed. Tunneling barrier called "decay length for tunneling" for the films having the thickness of Co layer from 1.4 to 1.6 nm was measured to be ranged from 0.004 to 0.021 ${\AA}$$\^$-1/.문에 기업간 관계를 연구하는 측면에서는 탐험적 연구성격이 강하다. 더 나아가 본 산업의 주된 연구가 질적이고 기업내부만을 연구했던 것에 비교하면 시초적이라고 할 수 있다. 또한 관계마케팅, CRM 등의 이론적 배경이 되고 있는 신뢰와 결속의 중요성이 재확인하는 결과도 의의라고 할 수 있다. 그리고 신뢰는 양사 간의 상호관계에서 조성될 수 있는 특성을 가진 반면, 결속은 계약관계 초기단계에서 성문화하고 규정화 할 수 있는 변수의 성격이 강하다고 할 수가 있다. 본 연구는 복잡한 기업간 관계를 지나치게 협력적 측면에서만 규명했기 때문에 많은 측면을 간과할 가능성이 있다. 또한 방법론적으로 일방향의 시각만을 고려했고, 횡단적 조사를 통하고 국내의 한 서비스제공업체와 관련이 있는 컨텐츠 공급파트너

• Korean Journal of Agricultural Science
• /
• v.35 no.2
• /
• pp.137-145
• /
• 2008

A layer feeding trial was conducted to investigate the effects of high quality corn distiller's dried grains with solubles(DDGS) on laying performance and nutrient metabolizabilities. A total of 216 Hy-line Brown layers, 23-wk of age, were employed in a 10-wk feeding trial consisting of three dietary treatments(0%, 10%, and 20% DDGS), and six replicates per treatment. All experimental diets were prepared as iso-protein(17%) and iso-calorie(2,780 kcal/kg). At the end of the trial, the effect of DDGS on fecal ammonia emission was also estimated. The use of DDGS up to 20% in layer diets did not affect the feed intake, laying rate, egg weight, and feed conversion ratio(P>0.05). The DM metabolizability decreased significantly(P<0.05) by the DDGS supplementation(P<0.05). The NFE metabolizability decreased gradually as the level of DDGS increased(P<0.05). The fecal ammonia emission from DDGS-fed birds tended to decrease as the storage days extended. In conclusion, albeit DDGS has some unfavorable effects on DM and NFE metabolizabilities, it could be included in layer diets up to 20% level without any harmful effects on laying performance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.184-191
• /
• 2000

We discussed load CUlTent sharing for Master/Slave convertedMSC) type two DC-DC Converters parallel operation using a single current sensor method. In the conventional method, two CTs have been used to share t the load CUlTent equally with two coηverters‘ This paper presents a novel load CUlTent distribution method u using a single CUlTent sensor that can share load CUlTent effectively with only one CT in the Master-Slave C conveη:ers(MSCs) type. To confirm parallel operational performance of proposed DC-DC converters parallel operation, two experimental prototype converters were designed, implemented and experimented under three a arbitrary conditions. A load cur‘rent shahring perforrnance of the proposed method was compared with that of a c conventional peak CUt${\gamma}$ent method requmng two CTs. Those experimental results show that load cUlTent s sharing performance of paralleled two converters using a single CUlTent sensor was good and operated as well a as conventional method (ex, Pe밟 CUlTent Method)

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.1071-1078
• /
• 2005

Use case modeling is a widely used technique for functional requirements analysis of business system but it is difficult to identify a use cases at the right level and use case specifications are too long and confusing. It is also hard to determine a functional decomposition Phases·s of use cases. Therefore customer doesn't understand the use cases. This paper is defining concept of the Information Structure Modeling(ISM) and analyzing business system for the customer's perspective. ISM is an efficient mechanism for analyzing user requirements and for Identifying objects in a business system using Attribute Structure Diagram which is a major tool of the ISM that describes user event. This paper is also to show how the classes are classified and derived as event-asset-transaction type in ISM. It provides a user-friendly approach to visually representing business model.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.387-393
• /
• 2021

In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.

• Korean Journal of Materials Research
• /
• v.18 no.11
• /
• pp.617-622
• /
• 2008

In this study, the additivity factors of compositions to density and glass transition point ($T_g$) in a $xLi_2O-(1-x)[(1-y)TeO_2-yZnO]$ (0$T_g$ was discussed. As a method for predicting the relation between glass structure and ionic conductivity, density was measured by the Archimedes method. The glass transition point was analyzed to predict the relation between ionic conductivity and the bonding energy between alkali ions and non-bridge oxygen (NBO). The relation equations showing the additivity factor of each composition to the two properties are as follows: Density(g/$cm^3$) = $2.441x_1\;＋\;5.559x_2\;＋\;4.863x_3\;T_g(^{\circ}C)$ = $319x_1\;＋\;247x_2\;＋\;609x_3\;－\;1950x_1x_3$ ($x_1$ : fraction of $Li_2O$, $x_2$ : fraction of $TeO_2$, $x_3$ : fraction of ZnO) The density decreased as $Li_2O$ content increased. This was attributed to change of the $TeO_2$ structure. From this structural result, the electric conductivity of the glass samples was predicted following the ionic conduction mechanism. Finally, it is expected that electric conductivity will increase as the activation energy for ion movement decreases.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.5
• /
• pp.846-858
• /
• 2008

This study was designed to propose a method to draft bodice block pattern from 3D body scan data. Subjects were ten elderly women in their 60's, who wear basic size(B: 94cm, W: 82cm) garment. Scanning was done using 3D whole body scanner(WB4, Cyberware). Measurements for 3D data and cross section were attained using Auto CAD, by which a upper bodice pattern for elderly women was drawn on the basis of short measured method. The results are as following: As for most items, no significant differences were shown between measurements from Martin's anthropometry and those from 3D scan data, suggesting measurement from 3D scan data could be used to draft a pattern. The drafting equations acquired were as follows; width of pattern=B/2+5.5, width of waist=W/2+3.5cm, dart amount=8cm. Dart distributions were 23%(B.P.) : 20%(front armpit) : 17%(side seam) : 18%(back armpit) : 15%(back protruded point) : 7% (center back line). Through wearing test using 5-point Likert scale, resultant pattern was evaluated as appropriate for elderly women's pattern to get over 4 point. As a result, it might be said that 3D scanning application is effective for elderly women in that it doesn't take time so much as Martin's anthropometry and that their body shape vary compared with those of young women.