• Korean Chemical Engineering Research
• /
• 제53권4호
• /
• pp.425-430
• /
• 2015

고분자 복제방법을 이용하여 제조한 폼 형태의 다공성 탄화규소 표면에 수열 합성 방법을 적용하여 ZSM-5를 합성하였다. 다공성 탄화규소 표면으로부터 ZSM-5가 합성될 수 있도록 유도하기 위하여 합성단계에 앞서 탄화규소 표면에 산화 층을 형성하였다. 수열합성 반응은 산화처리 된 다공성 탄화규소와 TEOS, $Al(NO_3){\cdot}9H_2O$ 및 TPAOH를 원료로 사용하여 $150^{\circ}C$에서 7시간 진행하였다. XRD 및 SEM 분석을 통하여 $1{\sim}3{\mu}m$ 크기의 ZSM-5가 다공성 탄화규소 표면에 코팅되어 성장하였음을 확인하였다. BET 분석결과 ZSM-5 합성 후에 $10{\AA}$이하의 미세기공이 급격히 증가하였으며, 비표면적이 $0.83m^2/g$에서 $30.75m^2/g$으로 급격히 증가되었음을 알 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.136-136
• /
• 2003

In fiber optic networks, system size and cost can be significantly reduced by development of optical components through planar optical waveguides. One important step to realize the compact optical devices is to develop planar optical amplifier to compensate the losses in splitter or other components. Planar amplifier provides optical gain in devices less than tens of centimeters long, as opposed to fiber amplifiers with lengths of typically tens of meters. To achieve the same amount of gain between the planar and fiber optical amplifier, much higher Er doping levels responsible for the gain than in the fiber amplifier are required due to the reduced path length. These doping must be done without the loss of homogeniety to minimize Er ion-ion interactions which reduce gain by co-operative upconversion. Sol-gel process has become a feasible method to allow the incorporation of Er ion concentrations higher than conventional glass melting methods. In this work, Er-doped $SiO_2$-A1$_2$ $O_3$ films were prepared by two different method via sol -Eel process. Tetraethylorthosilicate(TEOS)/aluminum secondary butoxide [Al (OC$_4$ $H_{9}$)$_3$], methacryloxypropylcnethoxysaane(MPTS)/aluminum secondary butofde [Al(OC$_4$ $H_{9}$)$_3$] systems were used as starting materials for hosting Er ions. Er-doped $SiO_2$-A1$_2$ $O_3$ films obtahed after heat-treating, coatings on Si substrate were characterized by X-ray din action, FT-IR, and N-IR fluorescence spectroscopy. The luminescence properties for two different processing procedure will be compared and discussed from peak intensity and life time.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.196-201
• /
• 2006

Silica(SiO2) nanoparticles are used as additives in plastics and rubbers to improve mechanical, electrical, magnetic properties and optical material. Silica nanoparticles were synthesized by the gas phase thermal oxidation of several kinds of precursors in many types of reactor. Diffusion flame reactor has some advantages compared with other types of reactors. In this study, we investigated the generation of silica nanoparticles on the effect of residence time by tetraethylothosilicate(TEOS) in a turbulent diffusion flame reactor controlled by providing reactant flowrate and reactor geometry affect particle morphology, particle size and particle size distribution. To determine the flame residence time, flame length should be determined which was examined by ICCD image. Particle size, distribution and morphology were performed with TEM.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.173-176
• /
• 2014

The hollow $SiO_2$ spheres with uniform size were synthesized by a modified Stober method under the control of polyelectrolytes (PSS and PAA) as templates. This synthetic route includes the formation of spherical colloid micelle in ethanol solution, hydrolysis of TEOS under control of ammonia, and the removal of polyelectrolyte by washing or calcination. Hollow silica spheres with controllable core diameters between 100 and 270 nm and wall thickness between 15 and 50 nm have been synthesized. The influence of template solution concentration and solvent and dispersant on the formation of silica hollow spheres is studied and reported in detail.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.96-99
• /
• 2004

A new proton conductive inorganic-organic hybrid membrane doped with $H_3PO_4$ was fabricated via sol-gel process wit 3- glycidoxypropyltrimethoxysilane(GPTMS), 3-aminopropyltriethoxysilane(APTES) and tetraethoxysilane(TEOS) asprecursors. Theproto conductivity of about 3.0$\times10^{-3}S/cm$ was obtained at $120^{\circ}C$ under $50\%$ relative humidity (R.H). DTA curves showed that the thermal stability of the membrane is significantly enhanced by the presence of $SiO_2$ framework up to $250^{\circ}C$. SEM and XRD revealed that the gel is microporou and amorphous. The addition of APTES improved the conductivity of the membranes and the effect of the APTES on the conductivity was also discussed in this paper.

• 한국재료학회지
• /
• 제8권4호
• /
• pp.317-322
• /
• 1998

플라즈마 화학기상증착법에 의해 증착된 저유전율 SiOF박막의 물성 안정화를 위하여 증착후 $N_2O$플라즈마로 열처리함으로써 그 특성을 평가하였다. SiOF박막은 대기방치 및 열처리에 불안정한 성질을 가진다. SiOF 박막은 박막내의 F-Si-F 결합의 존재 때문에 흡습현상이 발생하며, 박막내의 F함량이 증가함에 따라 수분 흡수가 증가한다. 또한 열처리를 거치면서 F이 탈착되어 박막내의 F함량이 감소한다. $N_2O$플라즈마 열처리는 표면에 얇은 SiON층을 형성시킴으로써 박막을 안정화시키는데 효과적이었다. 그러나 장시간의 N/sun 2/O플라즈마 열처리는 유전율을 크게 증가시킨다. 따라서 $N_2O$플라즈마 열처리에 의한 유전율의 증가없이 물성을 안정화 시키기 위해서는, 대기방치나 열처리에 의한 안정화 효과를 유지하면서 $N_2O$플라즈마 열처리에 의한 유전율의 증가를 최소화시킬 수 있는 공정의 확립이 필요하다.

• 한국세라믹학회지
• /
• 제34권9호
• /
• pp.993-1001
• /
• 1997

The (0.8PPV+0.2DMPPV) copolymer and silica/borosilicate composites were synthesized by sol-gel process. The organic-inorganic hybrid solution was prepared by using of (0.8PPV+0.2DMPPV) copolymer precursor solution as a raw material for organic components and TEOS and TMB for glass components. Then by drying the solution in vacuum at 5$0^{\circ}C$ for 7days and subsequent heat treatment in vacuum at 15$0^{\circ}C$~30$0^{\circ}C$ for 2h~72h with heating rate of 0.2$^{\circ}C$/min and 1.8$^{\circ}C$/min, the organic-inorganic composites were synthesized. Microstructural evolution of the composites was characterized by DSC, IR spectrocopy, UV/VIS spectroscopy, and TEM. Elimination of the polymer precursor and degradation of the polymer were observed by DSC and Si-O and trans C=C absorption peaks were identified by IR spectra. The polymer was found to be successfully incorporated into the glass matrix and it was confirmed by the absorption peaks from the polymer in the UV/VIS spectra and the TEM results. The absorption peak of the composites was found to shift toward short wavelength side compared to that of the pure polymer and the amount of the blue shift increased with increasing the heat treatment temperature and heat treatment time and with decreasing the heating rate.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.865-872
• /
• 1991

LAS (lithium aluminosilicate) sol was synthesized using the hydrolysis-condensation reaction of TEOS, chelated Al(OBus)3 and LiNO3 with H2O in alcohol (ethanol+2-propanol) medium. Lowering Li content by a factor of 1/2 significantly enhanced densification and retarded the crystallization of LAS gel by ~30$0^{\circ}C$. Dense LAS specimen with essentially pore-free microstructure was obtained by sintering the sol-gel derived gel at 80$0^{\circ}C$ for 4 h and annealing at 120$0^{\circ}C$ for 2 h. Similary, a mixed colloidal processing was attempted as a convenient, alternative route for the fabrication of dense LAS sintered body. The $\beta$-spodumene seeding (~0.8 ${\mu}{\textrm}{m}$) in the sol-gel derived LAS modified the sequence of phase transformations and lowered the temperature of crystallization by ~12$0^{\circ}C$. Combining the epitaxial seeding with the sol-gel process, we could lower the crystallization temperature to the sintering temperature range (~80$0^{\circ}C$) and, demonstrate a possibility of making the viscous sintering/crystallization as a continuous as a continuous unit process.

• 공업화학
• /
• 제9권5호
• /
• pp.639-647
• /
• 1998

알루미늄 함유 티타늄 실리카라이트-1 ([Al]-TS-1) 촉매를 수열합성하고 실리카원, 알루미늄원, $SiO_2/TiO_2$ 몰비, 및 숙성처리와 같은 합성인자들의 영향을 살펴 보았다. 제조한 촉매의 구조, 결정의 크기 및 모양은 X-선 회절분석 및 주사전자 현미경으로 살펴보았으며, UV-vis DRS 분석으로 제올라이트 구조 내로 치환된 티타늄의 상태를 확인하였다. [Al]-TS-1의 합성에 있어서는 약 24시간의 숙성과정이 필수적이었으며, Cab-O-Sil을 실리카원으로 사용한 경우가 Ludox 및 TEOS를 사용한 경우보다 더욱 빠른 결정화 속도를 나타내었다. 알루민산나트륨을 알루미늄원으로 사용한 경우가 질산알루미늄을 사용한 경우보다 더 높은 결정화도를 나타내었고 결정화 시간도 단축되었다. 합성한 촉매의 산화/환원 특성은 과산화수소를 산화제로 2-butanol의 액상 산화를 모델 반응으로 선택하여 검토하였다. 산촉매반응으로 톨루엔 알킬화반응을 수행한 결과, [Al]-TS-1의 산세기는 구조내에 존재하는 티타늄에 기인하여 약해졌으며 para-에틸톨루엔의 선택도는 향상됨을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제22권12호
• /
• pp.1009-1013
• /
• 2009

In this study, we have been synthesized the dielectric layer using pure organic and organic-inorganic hybrid precursor on flexible substrate for improving of the organic thin film transistors (OTFTs) and, design and fabrication of organic thin-film transistors (OTFTs) using small-molecule organic semiconductors with pentacene as the active layer with record device performance. In this work OTFT test structures fabricated on polymerized substrates were utilized to provide a convenient substrate, gate contact, and gate insulator for the processing and characterization of organic materials and their transistors. By an adhesion development between gate metal and PI substrate, a PI film was treated using $O_2$ and $N_2$ gas. The best peel strength of PI film is 109.07 gf/mm. Also, we have studied the electric characteristics of pentacene field-effect transistors with the polymer gate-dielectrics such as cyclohexane and hybrid (cyclohexane+TEOS). The transistors with cyclohexane gate-dielectric has higher field-effect mobility, $\mu_{FET}=0.84\;cm^2/v_s$, and smaller threshold voltage, $V_T=-6.8\;V$, compared with the transistor with hybrid gate-dielectric.