• 마이크로전자및패키징학회지
• /
• 제21권4호
• /
• pp.41-44
• /
• 2014

본 연구에서는 $TiO_2$에 나이오븀 (Nb) 도펀트가 주입되었을 때의 활성화 에너지를 홀 효과 측정 시스템과 온도에 따른 photoluminescence (PL) 실험을 통하여 살펴보았다. Nb 이 도핑 된 n형 아나타제 $TiO_2$ 박막은 pulsed laser deposition (PLD) 기법으로 $SrTiO_3$기판에 성장되었다. 측정 결과, Nb 도너의 활성화 에너지 값은 홀 효과 측정에서는 14.52 meV, PL 측정에서는 6.72 meV로 다소 차이를 보였다. 이 결과는 기존의 어셉터 물질의 활성화 에너지들과는 차이를 나타내고 있으며, 향후 본 연구와 같은 shallow 도너 준위의 활성화 에너지 연구에 대한 더 많은 연구가 필요할 것으로 판단된다.

• 한국진공학회지
• /
• 제11권3호
• /
• pp.135-140
• /
• 2002

본 논문에서는 p-type (100)Si, (100)MgO 그리고 MgO/si 기판 위에 RF Magnetron sputtering 법으로 $Ba_{0.5}Sr_{0.5}TiO_3$(BST)박막을 증착하였다. BST 박막 증착 후 RTA(Rapid Thermal Annealing)를 이용하여 $600^{\circ}C$에서 산소분위기로 1분간 고온 급속 열처리를 하였다. 증착된 BST박막의 결정화를 조사하기 위해 XRD(X-Ray Diffraction)측정을 한 결과 모든 기판에서 (110) $Ba_{0.5}Sr_{0.5}TiO_3$(의 주피크가 관찰되어졌고, 열처리 후 재결정화에 기인하여 피크 세기가 증가함을 관찰할 수 있었다. Al 전극을 이용한 커패시터 제작 후 측정한 C-V(Capacitance-Voltage) 특성에서 각각의 기판에서 측정된 커패시턴스 값으로 계산된 유전율은 120(bare Si), 305(Mgo/Si) 그리고 310(MgO)이었다. 누설 전류 특성에서는 0.3 MV/cm이내의 인가전계에서 1 $\mu\textrm{A/cm}^2$ 이하의 안정된 값을 보여주었다. 결론적으로 MgO 버퍼층을 이용한 기판이 BST 박막의 증착을 위한 기판으로써 효과적임을 알 수 있었다.

• 센서학회지
• /
• 제22권4호
• /
• pp.244-248
• /
• 2013

The discovery of a two-dimensional electron gas (2DEG) in $LaAlO_3$ (LAO)/$SrTiO_3$ (STO) heterostructure has stimulated intense research activity. We suggest a new structure model based on $KNbO_3$ (KNO) material. The KNO thin films were grown on $TiO_2$-terminated STO substrates as a p-type structure ($NbO_2/KO/TiO_2$) to form a two-dimensional hole gas (2DHG). The STO thin films were grown on KNO/$TiO_2$-terminated STO substrates as an n-type structure to form a 2DEG. Oxygen pressure during the deposition of the KNO and STO thin films was changed so as to determine the effect of oxygen vacancies on 2DEGs. Our results showed conducting behavior in the n-type structure and insulating properties in the p-type structure. When both the KNO and STO thin films were deposited on a $TiO_2$-terminated STO substrate at a low oxygen pressure, the conductivity was found to be higher than that at higher oxygen pressures. Furthermore, the heterostructure formed at various oxygen pressures resulted in structures with different current values. An STO/KNO heterostructure was also grown on the STO substrate, without using the buffered oxide etchant (BOE) treatment, so as to confirm the effects of the polar catastrophe mechanism. An STO/KNO heterostructure grown on an STO substrate without BOE treatment did not exhibit conductivity. Therefore, we expect that the mechanics of 2DEGs in the STO/KNO heterostructures are governed by the oxygen vacancy mechanism and the polar catastrophe mechanism.

• 한국세라믹학회지
• /
• 제37권3호
• /
• pp.233-239
• /
• 2000

Sr0.9Bi2+xTa2O9(x=0, 0.1, 0.2, 0.3) thin films on IrO2/SiO2/Si or Pt/Ti/SiO2/Si substrate were prepared by spin coating method using SBT stock solutions synthesized by MOD process. SBT thin films on IrO2 transformed to layered perovskite phase at $700^{\circ}C$, but showed low breakdown voltage due to their porous microstructure. The smaple of Sr0.9Bi2+xTa2O9 composition showed the best dielectric and electrical properties. When the sample of the same composition was annealed at 80$0^{\circ}C$, the dielectric and electric properties were improved due to the grian growth and dense surface. the remanent polarization values(2Pr) at $\pm$3 V for IrO2 and Pt electrodes were 10.5, 7.15$\mu$C/$\textrm{cm}^2$, respectively. The SBT thin film with IrO2 electrode showed the lower coercive field. The leakage current density and breakdown voltage of SBT thin films on IrO2 were higher than those on Pt.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.46-51
• /
• 2003

Liquid delivery MOCVD 공정으로 200nm 정도의 두께를 가진 강유전성 S $r_{0.7}$B $i_{2.1}$T $a_{2.0}$ $O_{9}$ 박막을 Pt/Ti/ $SiO_2$/Si 기판 위에 증착하였다. 본 실험에서는 Sr(TMHD)$_2$.pmdeta, Bi(ph)$_3$ 그리고 Ta( $O^{i}$ Pr)$_4$(TMHD)를 출발 물질로 사용하였으며 n-butyl acetate와 pentamethyldiethylenetriamine를 용매로 사용하였다. 이 실험의 기판 온도와 압력 조건은 각각 57$0^{\circ}C$와 5 Torr였다. 78$0^{\circ}C$에서 열처리한 SBT 박막의 3V와 5V 인가 전압하에서의 잔류분극값은 각각 7.247 $\mu$C/$\textrm{cm}^2$와 8.485 $\mu$C/$\textrm{cm}^2$이었다.다.다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.83-86
• /
• 1999

We have fabricated $_2Cu_3O_7$ step-edge junctions with different step orientations and studied their transition properties. Steps with different orientations were prepared on the substrate. Josephson junctions were made on a single substrate with step orientations ranging from 0$^{\circ}$ to 165$^{\circ}$ at 15$^{\circ}$ interval. We measured current-voltage characteristics, the critical current, and the superconducting transition temperature as a function of the angle. The critical current showed a modulation that has a maximum near 0$^{\circ}$ or 90$^{\circ}$ and a minimum near 45$^{\circ}$ and 135$^{\circ}$. We believe that the critical current modulation with the step orientation could be associated with the symmetry of high T$_c$ superconductor.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권2호
• /
• pp.1-6
• /
• 2009

We report a successful fabrication of $high-J_c\;NdBa_2Cu_3O_{7-{\delta}}$ (NdBCO) films on $SrTiO_3$(STO) (100) substrates by pulsed laser deposition (PLD) in a relatively wide processing window. Under various oxygen pressures controlled by either 1%$O_2$/Ar mixture gas or pure $O_2$ gas, strongly c-axis oriented NdBCO films were grown at the substrate temperature $(T_s)\;of\;800^{\circ}C$ in 800 mTorr with 1%$O_2$/Ar gas and also in 400 and 800 mTorr with pure $O_2$ gas. These samples exhibited $T_c$ values over 90K and $J_c$ values of $2.8-3.5MA/cm^2$ at 77K in self-field (77K, sf). On the other hand, $J_c$ values over $1A/cm^2$ were obtained at the temperature regions of $700-830^{\circ}C$ in 800 mTorr with 1%$O_2$/Ar gas at those of $750-830^{\circ}C$ in 800 mTorr with pure $O_2$ gas. Unlike previous reports, resent results support that the PLD processing window for high-Jc NdBCO films is not narrow.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.794-797
• /
• 2004

The object of investigation is represented by PbxSrl-xTiO3(PST) thin films, which were fabricated by the alkoxide-based sol-gel method on Pt/Ti/SiO2/Si substrate. We have investigated both structural and dielectric properties of PST thin films aimed to tunable microwave device applications as a function of Pb/Sr ratio. PST thin films showedtypical polycrystalline structure with a dense microstructure without secondary phase formation. Dielectric properties of PST films were found as strongly dependent on Pb/Sr composition ratio. Increasing of Pb content leads to simultaneous increasing of both dielectric constant and dielectric loss characteristics of PST films. The figure of merit (FOM) Parameter (FOM : (%) tunability / tan (%)) reached a maximal value of 27.5 corresponding to Pb/Sr ratio of 40/60. The tunability increased with increasing Pb content. The dielectric constants, dielectric loss and tunability of the PST thin films at Pb/sr ratio of 40/60 measured at 100 kHz were 335, 0.0174 and 47.89 %, respectively.

• 센서학회지
• /
• 제11권1호
• /
• pp.48-53
• /
• 2002

강유전 물질인 $Pb_{0.99}[(Zr_{0.6}Sn_{0.4})_{1-x}Ti_x]_{0.98}Nb_{0.02}O_3$(PNZST) 박막을 10 mole%의 과잉 PbO가 첨가된 타겟을 이용하여 $La_{0.5}Sr_{0.5}CoO_3$(LSCO)/Pt/Ti/$SiO_2$/Si 기판상에 RF 마그네트론 스퍼터링 방법으로 증착하였다. Ti의 조성비를 변화시키면서 증착된 박막에 대하여 그 결정성과 전기적 특성을 조사하였다. 80 W의 RF 전력, $500^{\circ}C$의 기판온도에서 증착한 후, $650^{\circ}C$, 공기중에서 10초 동안 급속 열처리된 박막이 가장 우수한 페로브스카이트상으로 결정화되었다. 또한. Ti의 조성비가 10 mole%를 가지는 PNZST이 가장 우수한 결정성과 강유전 특성을 나타내었다. 이러한 박막으로 제작된 PNZST 커패시터는 약 $20\;{\mu}C/cm^2$정도의 잔류분극과 약 50 kV/cm 정도의 항전계를 나타내었으며, $2.2{\times}10^9$의 스위칭 후에도 잔류분극의 감소는 10% 미만이었다.

• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.582-588
• /
• 2012

In this paper, a highly miniaturized and performed UWB bandpass filter has been newly designed and implemented by embedding all the passive elements into a multi-layered PCB substrate with high dielectric $SrTiO_3$ composite film for 3.1 - 4.75 GHz compact UWB system applications. The high dielectric composite film was utilized to increase the capacitance densities and quality factors of capacitors embedded into the PCB. In order to reduce the size of the filter and avoid parasitic EM coupling between the embedded filter circuit elements, it was designed by using a $3^{rd}$ order Chebyshev circuit topology and a capacitive coupled transformation technology. Independent transmission zeros were also applied for improving the attenuation of the filter at the desired stopbands. The measured insertion and return losses in the passband were better than 1.68 and 12 dB, with a minimum value of 0.78 dB. The transmission zeros of the measured response were occurred at 2.2 and 5.15 GHz resulting in excellent suppressions of 31 and 20 dB at WLAN bands of 2.4 and 5.15 GHz, respectively. The size of the fabricated bandpass filter was $2.9{\times}2.8{\times}0.55(H)mm^3$.