Journal of Sensor Science and Technology (센서학회지)

The Korean Sensors Society (한국센서학회)
권호 표지
DOI QR코드

DOI QR Code

Oxygen Vacancy Effects of Two-Dimensional Electron Gas in SrTiO3/KNbO3 Hetero Structure

  • Choi, Woo-Sung (Electronic Materials Research Center, Korea Institute of Science and Technology) ;
  • Kang, Min-Gyu (Electronic Materials Research Center, Korea Institute of Science and Technology) ;
  • Do, Young-Ho (Electronic Materials Research Center, Korea Institute of Science and Technology) ;
  • Jung, Woo-Suk (Electronic Materials Research Center, Korea Institute of Science and Technology) ;
  • Ju, Byeong-Kwon (Display and Nanosystem Laboratory, College of Engineering, Korea University) ;
  • Yoon, Seok-Jin (Research Planning & Coordination Division, Korea Institute of Science and Technology) ;
  • Yoo, Kwang-Soo (Materials Science and Engineering, University of Seoul) ;
  • Kang, Chong-Yun (Electronic Materials Research Center, Korea Institute of Science and Technology)
  • Received : 2013.05.15
  • Accepted : 2013.07.08
  • Published : 2013.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

The discovery of a two-dimensional electron gas (2DEG) in $LaAlO_3$ (LAO)/$SrTiO_3$ (STO) heterostructure has stimulated intense research activity. We suggest a new structure model based on $KNbO_3$ (KNO) material. The KNO thin films were grown on $TiO_2$-terminated STO substrates as a p-type structure ($NbO_2/KO/TiO_2$) to form a two-dimensional hole gas (2DHG). The STO thin films were grown on KNO/$TiO_2$-terminated STO substrates as an n-type structure to form a 2DEG. Oxygen pressure during the deposition of the KNO and STO thin films was changed so as to determine the effect of oxygen vacancies on 2DEGs. Our results showed conducting behavior in the n-type structure and insulating properties in the p-type structure. When both the KNO and STO thin films were deposited on a $TiO_2$-terminated STO substrate at a low oxygen pressure, the conductivity was found to be higher than that at higher oxygen pressures. Furthermore, the heterostructure formed at various oxygen pressures resulted in structures with different current values. An STO/KNO heterostructure was also grown on the STO substrate, without using the buffered oxide etchant (BOE) treatment, so as to confirm the effects of the polar catastrophe mechanism. An STO/KNO heterostructure grown on an STO substrate without BOE treatment did not exhibit conductivity. Therefore, we expect that the mechanics of 2DEGs in the STO/KNO heterostructures are governed by the oxygen vacancy mechanism and the polar catastrophe mechanism.

Keywords

References

  1. Y. Tokura and H. Y. Hwang, "Condensed-matter physics: Complex oxides on fire", Nat. Mater., Vol. 7, p. 694, 2008.
  2. J. W. Reiner, F. J. Walker, and C. H. Ahn, "Atomically engineered oxide interfaces", Science, Vol. 323, p. 1018, 2009. https://doi.org/10.1126/science.1169058
  3. A. Brinkman, M. Huijben, M. van Zalk, J. Huijben, and U. Zeitler, "Magnetic effects at the interface between non-magnetic oxides", Nat. Mater., Vol. 6, p. 493, 2007. https://doi.org/10.1038/nmat1931
  4. N. Reyren, S. Thiel, A. D. Caviglia, L. Fitting Kourkoutis, G. Hammerl, C. Richter, C. W. Schneider, T. Kopp, A.-S. Ruetschi, D. Jaccard, M. Gabay, D. A. Muller, J. M. Triscone, and J. Mannhart, "Superconducting interfaces between insulating oxides", Science, Vol. 317, p. 1196, 2007. https://doi.org/10.1126/science.1146006
  5. Z. S. Popovic, S. Satpathy, and R. M. Martin, "Origin of the two-dimensional electron gas carrier density at the $LaAlO_{3}$ on $SrTiO_{3}$ interface", Phys. Rev. Lett., Vol. 101, p. 256801, 2008. https://doi.org/10.1103/PhysRevLett.101.256801
  6. A. Ohtomo and H. Y. Hwang, "A high-mobility electron gas at the $LaAlO_{3}$/$SrTiO_{3}$ heterointerface", Nature, Vol. 427, p. 423, 2004. https://doi.org/10.1038/nature02308
  7. N. Nakagawa, H. Y. Hwang, and D. A. Muller, "Why some interface can not be sharp", Nat. Mater., Vol. 5, p. 204, 2006. https://doi.org/10.1038/nmat1569
  8. C. Noguera, "Polar oxide surfaces", J. Phys.-Condes. Matter, Vol. 12, p. R367, 2000. https://doi.org/10.1088/0953-8984/12/31/201
  9. P. W. Tasker, "The stability of ionic crystal surfaces", J. Phys. C: Solid State Phys, Vol. 12, p. 4977, 1979 https://doi.org/10.1088/0022-3719/12/22/036
  10. A. Kalabukhov, R. Gunnarsson, J. Borjesson, E. Olsson, T. Claeson, and D. Winkler, "Effect of oxygen vacancies in the $SrTiO_{3}$ substrate on the electrical properties of the $LaAlO_{3}$/$SrTiO_{3}$ interface", Phys. Rev. B, Vol. 75, p. 121404, 2007. https://doi.org/10.1103/PhysRevB.75.121404
  11. M. K. Niranjan, Y. Wang, S. S. Jaswal, and E. Y. Tsymbal, "Prediction of a switchable two-dimensional electron gas at ferroelectric oxide interfaces", Phys. Rev. Lett., Vol. 103, p. 016804, 2009. https://doi.org/10.1103/PhysRevLett.103.016804
  12. Y. Wang, M. K. Niranjan, S. S. Jaswal, and E. Y. Tsymbal, "First-principles studies of a twodimensional electron gas at the interface in ferroelectric oxide heterostructures", Phys. Rev. B, Vol. 80, p. 165130, 2009. https://doi.org/10.1103/PhysRevB.80.165130
  13. H. N. Lee, H. M. Christen, M. F. Chisholm, C. M. Rouleau, and D. H. Lowndes "Thermal stability of epitaxial $SrRuO_{3}$ films as a function of oxygen pressure", Appl. Phys. Lett., Vol. 84, 4107, 1956.
  14. M. Hiratani, Y. Tarutani, T. Fukazawa, and M. Okamoto, "Growth of $SrTiO_{3}$ thin films by pulsedlaser deposition", Thin Solid Films, Vol. 227, p. 100, 1993. https://doi.org/10.1016/0040-6090(93)90192-R
  15. C. Cen, S. Thiel, J. Mannhart, and J. Levy "Oxide nanoelectronics on demand", Science, Vol. 323, p. 1026, 2009. https://doi.org/10.1126/science.1168294
  16. C. Cen, S. Thiel, G. Hammerl, C. W. Schneider, K. E. Andersen, C. S. Hellberg, J. Mannhart, and J. Levy "Nanoscale control of an interfacial metal-insulator transition at room temperature", Nat. Mater., Vol. 7, p. 298, 2008. https://doi.org/10.1038/nmat2136

Cited by

  1. Metallicity at interphase boundaries due to polar catastrophe induced by charge density discontinuity vol.10, pp.2, 2018, https://doi.org/10.1038/am.2017.236