• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.507-520
• /
• 2022

The Sr isotope ratio, which is used as basic data for rock formation time, crustal and mantle evolution studies, is determined by mass spectrometer such as thermal ionization mass spectrometry (TIMS) or multi-detector inductively coupled plasma mass spectrometry (MC-ICP-MS). In this technical report, we compared how incomplete chemical separation of elements affects the determination of Sr isotope ratios. For the experiment, commercial resin, NBS987(NIST SRM987) Sr isotope standard, and rock standard samples from the Geological Survey of Japan (GSJ) such as JG1a, JB3 and JA1 were used. As a result of the comparative experiment, it was clearly observed that the measured values of ⁸⁷Sr/⁸⁶Sr change when Rb remains due to incomplete separation of the NBS987 Sr isotope standard sample as well as the rock standard samples of GSJ. This indicates that complete separation is an important factor since the calculated value deviates from the true value even though correction for isotope interference by isobar is performed when measuring the isotope ratio with MC-ICP-MS. This also suggests that, when reporting the measurement result of Sr isotope ratio using MC-ICP-MS, the measurement strength of ⁸⁵Rb should be reported together with the measurement strength of all isotopes of Sr so that isotope interference by isobar can be judged.

• Design & Manufacturing
• /
• v.2 no.4
• /
• pp.44-47
• /
• 2008

The magnetic polishing is the useful method to finish some machinery fabrications by using magnetic power. This method is one of the precision techniques and has an aim for clean technology in the transportation of the pure gas in the clean pipes. The magnetic abrasive polishing method is not so common in the field of machine that it is not known to widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. Therefore, in this paper we deals with the development of the magnetic abrasive with the use of Sr-Ferrite. In this development, abrasive grain A has been made by using the resin bond fabricated at low temperature. And magnetic abrasive powder was fabricated from the Sr-Ferrite which was crushed into 200 mesh. The XRD analysis result shows that only A abrasive and Sr-Ferrite crystal peaks were detected, explaining that resin bond was not any more to contribute chemical reaction. From SEM analysis, we found that A abrasive and Sr-Ferrite were strongly bonding with each other.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.1
• /
• pp.20-27
• /
• 2001

Stream water chemistry in the abandoned Boeun Jeil coal mine area was studied for a period of 3 months, including rainy and dry season. The stream waters were a nearly neutral and slightly alkali condition, and $Mg-SO_4$ type with Mg>Ca>Na>K and $SO_4>HCO_3>Cl>NO_3$. Chemical composition of the stream water was quite irregular during the experimental period. Concentrations of Na, K, $HCO_3$, U, Sr, and Cr decreased by $10{\sim}30%$ during rainy season, caused by dilution effects with rain. The concentration of Ca, Mg, $NO_3$, Cd, and Co increased during the rainy season, caused by more easily dissolved from bedrocks or mine drainage with slightly acidic condition than dry season. The stream water was enriched in Mg, Ca, $HCO_3$, $SO_4$, Al, Fe, Zn, Ni, Co, Cr, Cd, Sr and U. Concentrations of Na, Mg, Ca, $SO_4$, $HCO_3$, Fe, Zn, Ni, Sr, and U decreased linearly with distance from the mine adit. These elements were strongly controlled by dilution of unpolluted water influx and/or adsorption on the clay minerals and iron oxyhydroxide precipitates. This mine area exhibited two main weathering processes ; 1) oxidation with acidification derived from Fe sulphides, and 2) pH buffering due to Ca and Mg carbonate dissolution. This weathering processes were followed by adsorption of metals on iron oxyhydroxides and precipitation.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.4
• /
• pp.78-89
• /
• 2012

The generated torque of a switched reluctance(SR) motor is highly nonlinear, which makes it difficult to determine the reference current commands for minimum torque ripples. In this paper, we present a computationally simple and efficient method to minimize torque ripples of SR motors based on iterative learning control. The reference current command of each phase minimizing torque ripples is identified in 2-dimensional look-up table form. Our learning control algorithm does not require the torque model, so our method is not affected by model errors and hence is very accurate. In order to justify our work, we present some computer simulation results.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.435-437
• /
• 2003

In order to investigate processes and factors controlling the chemical and isotopic compositions of the Han River, seasonal studies were carried out. The North Han River was much lower in the concentrations of total dissolved solids (TDS), dissolved inorganic carbon (DIC) and major ions than the South Han River, but higher in $SiO_2$ concentration, $\delta$$^{34}$ $S_{so4}$ value and $^{87}$ Sr/$^{86}$ Sr ratio. This indicates that the chemical and isotopic compositions of the Han River were strongly controlled by the geology of their drainage basins: silicate rocks in the North Han River and carbonate rocks in the South Han River. The $\delta$$^{34}$ $S_{so4}$ values were relatively higher in the North Han River (5.90$\pm$1.46$\textperthousand$)) than in the South Han River (3.48$\pm$0.73$\textperthousand$). This implies that dissolved S $O_{4}$$^{2-}$ in the North Han River might be mostly derived from deposition of atmospheric sulfates, whereas in the South Han River from oxidation of sulfide minerals in the abandoned poly-metallic deposits and the coal-bearing sedimentary rocks distributed over the upstream as well as deposition of atmospheric sulfates. The $^{87}$ S $r^{86}$ Sr ratios in the North Han River were distinctly higher than those in the South Han River, reflecting water-rock interaction with different rock types.pes.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.671-676
• /
• 2003

This paper presents 3-phase current regulation of SR motor by only single current sensor. The conventional drive system of SR motor has a current sensor per each phase. In this paper, The asymmetric bridge converter which Is able to control independently phases and be excited simultaneously is used fs the driver system for 6/4 poles SR motor. And the sensor Is replaced 3 sensors of each phase with only one on bus line of converter so as to detect current of every phase. A drive logic circuit is designed on EPLD with Delta modulation using a fixed frequency This technique is verified through simulation and experiment.

• Korean journal of food and cookery science
• /
• v.28 no.1
• /
• pp.41-49
• /
• 2012

This purpose of this study was to develop a tea with small red bean which have been known to have effect regarding anti-obesity, fatigue recovery, edema recovery, blood circulation, etc. In order to provide baseline data for small red bean tea we investigated the general components, antioxidative effect and proanthocyanidin analysis in small red beans[Phaseolus angularis W.F. Wight.]. Physicochemical analysis(pH, sugar content, salinity, turbidity), color, anti oralmicrobial activity, content of saponin and sensory test of small red bean with different boiling time in 8 minutes(SR1), 16 minutes(SR2), 24 minutes(SR3), 32 minutes(SR4), 40 minutes(SR5) was also measured. It was shown that the crude fat, carbohydrate, moisture, crude protein, crude ash content of small red bean were 1.0%, 63.9%, 12.8%, 18.7%, 3.6%. DPPH free radical scavenging activity, the total phenolic compounds content and flavonoid content increased significantly (p<0.001). The results of analyzed proanthocyanidin was distinguished by characteristic UV-visible spectra with absorption maximum at 320 nm($t_R$ 7.589 min). As the boiling time(8 minutes:SR1, 16 minutes:SR2, 24 minutes:SR3, 32 minutes:SR4, 40 minutes:SR5) of small red beans increaseds, the pH significantly decreased(p<0.001). The sugar content, salinity and turbidity significantly increased(p<0.001). Moreover, Hunter L, a and b values, crude saponin also increased(p<0.001). The results of analyzed activity against oral bacteria, S. mutans, S. sobrinus, P. intermedia and P. gingivalis showed a higher antibacterial activities than E. coli and S. aureus. MIC was measured that S. mutans, S. sobrinus, P. intermedia and P. gingivalis showed a lower MICs than E. coli and S. aureus. The results regarding sensory test measures, In case of color, refreshing taste and overall quality, SR3 had the highest preference overall among tested samples. In cases conceming odor and taste, SR5 had the highest preference and with regards to sweetness and saltyness, SR4 had the highest preference.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.5
• /
• pp.241-246
• /
• 2012

$Yb^{3+}$, $Er^{3+}$ co-doped $SrMoO_4$ ($SrMoO_4$ : $Yb^{3+}/Er^{3+}$) specimens have been successfully synthesized via the complex citrate-gel method and their structural and optical properties were investigated in detail. Under 980 nm excitation, $SrMoO_4$ : $Yb^{3+}/Er^{3+}$ UC phosphors have been emitted strong green luminescence at 530 and 550 nm with weak red emission around 670 nm corresponding to the intra 4f transitions of $Er^{3+}$ ($^4F_{9/2}$, $^2H_{11/2}$, $^4S_{3/2}$) ${\rightarrow}$ $Er^{3+}$ ($^4I_{15/2}$). The optimal doping concentrations of $Er^{3+}$ and $Yb^{3+}$ ions were verified to 2/16 mol% and a possible upconversion mechanism depending on pump power dependence is studied in detail.

• Journal of the Korean Ceramic Society
• /
• v.41 no.4
• /
• pp.340-343
• /
• 2004

SrA1$_2$O$_4$was prepared by polymerized complex method and crystalline growth was investigated. Precursors was annealed at temperatures form 900 to 100$0^{\circ}C$, for different time(between 0 and 10 h), and that was determined by Transmittance Electron Microscopy (TEM) and X-Ray Diffractometer (XRD). Crystalline size was calculated by Scherrer's equation and its variation was studied. It increased rapidly in the primary stage and then slowly as a function of square root of time. so, It was grown to 32, 45 and 59nm after heating treatment at 900, 980, and 100$0^{\circ}C$ for 10 h respectively. Cstalline growth rates were 4.5, 9.6, and 18.6 nm/h$^{1}$2/ as a addition of heating temperature.

• Korean Journal of Materials Research
• /
• v.20 no.5
• /
• pp.241-245
• /
• 2010

One of the weak points of the Cr-doped SZO is that until now, it has only been fabricated on perovskite substrates, whereas NiO-ReRAM devices have already been deposited on Si substrates. The fabrication of RAM devices on Si substrates is important for commercialization because conventional electronics are based mainly on silicon materials. Cr-doped ReRAM will find a wide range of applications in embedded systems or conventional memory device manufacturing processes if it can be fabricated on Si substrates. For application of the commercial memory device, Cr-doped $SrZrO_3$ perovskite thin films were deposited on a $SrRuO_3$ bottom electrode/Si(100)substrate using pulsed laser deposition. XRD peaks corresponding to the (112), (004) and (132) planes of both the SZO and SRO were observed with the highest intensity along the (112) direction. The positions of the SZO grains matched those of the SRO grains. A well-controlled interface between the $SrZrO_3$:Cr perovskite and the $SrRuO_3$ bottom electrode were fabricated, so that good resistive switching behavior was observed with an on/off ratio higher than $10^2$. A pulse test showed the switching behavior of the Pt/$SrZrO_3:Cr/SrRuO^3$ device under a pulse of 10 kHz for $10^4$ cycles. The resistive switching memory devices made of the Cr-doped $SrZrO_3$ thin films deposited on Si substrates are expected to be more compatible with conventional Si-based electronics.