• 센서학회지
• /
• 제1권2호
• /
• pp.117-123
• /
• 1992

적층구조의 Pt-Sn 박막을 히터 위에서 열산화하여 $Pt-SnO_{2-x}$ 박막형 CO 가스감지소자를 제조하였다. 열증착법으로 증착된 Sn의 두께는 $4000{\AA}$이었으며 그 위에 D.C. sputtering법으로 증착된 Pt의 두께는 $14{\AA}{\sim}71{\AA}$ 이었다. XRD 분석에서 $Pt-SnO_{2-x}$ 박막은 $200{\AA}$ 정도의 입경과 주방향성이 (110)인 $(SnO_{2}){\cdot}6T$ 결정상을 보였다. $Pt-SnO_{2-x}$ 박막소자(Pt 두께 : $43{\AA}$)는 6000 ppm의 CO에 대해 80% 정도의 감도와 CO에 대해 높은 선택도를 나타내었다. 그리고 CO에 고감도를 갖는 $Pt-SnO_{2-x}$ 박막소자의 열산화 온도와 동작온도가 각각 $500^{\circ}C$와 $200^{\circ}C$이었다.

• 한국정보통신학회논문지
• /
• 제10권9호
• /
• pp.1641-1647
• /
• 2006

나노입자 크기를 가진 얇은 $SnO_2$ 박막을 이용하여 CO 및 $H_2S$에 대한 우수한 감도를 가지는 복합 마이크로 가스센서 어레이를 제작하였다. 나노입자의 박막을 만들기 위해서 약 $2500{\AA}$ 두께의 $SnO_2,\;SnO_2(+Pt),\;SnO_2(+CuO)$ 막을 셰도우마스크를 사용하여 형성 한 후, 이를 $600{\sim}800^{\circ}C$의 온도에서 산화하므로서 나노입자의 $SnO_2$ 모물질의 가스감지 박막을 형성하였다. 실리콘 기판의 마이크로센서의 형태로 제작된 $SnO_2(Pt)$ 및 $SnO_2(+CuO)$ 가스센서는 각각 CO 및 $H_2S$ 가스에 대한 매우 우수한 감도를 나타내는 것을 확인하였다.

• 한국재료학회지
• /
• 제26권4호
• /
• pp.222-227
• /
• 2016

Tin oxides have been studied for various applications such as gas detecting materials, transparent electrodes, transparent devices, and solar cells. p-type SnO is a promising transparent oxide semiconductor because of its high optical transparency and excellent electrical properties. In this study, we fabricated p-type SnO thin film using rf magnetron sputtering with an SnO/Sn composite target; we examined the effects of various oxygen flow rates on the SnO thin films. We fundamentally investigated the structural, optical, and electrical properties of the p-type SnO thin films utilizing X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV/Vis spectrometry, and Hall Effect measurement. A p-type SnO thin film of $P_{O2}=3%$ was obtained with > 80% transmittance, carrier concentration of $1.12{\times}10^{18}cm^{-3}$, and mobility of $1.18cm^2V^{-1}s^{-1}$. With increasing of the oxygen partial pressure, electrical conductivity transition from p-type to n-type was observed in the SnO crystal structure.

• 한국표면공학회지
• /
• 제23권2호
• /
• pp.18-23
• /
• 1990

Thin films of tin oxide were prepared by chemical vapor deposition (C.V>D) using the hydrolysis reaction of SnCl4, Deposition rate increased with the increase of temperature up to $500^{\circ}C$and then decreased at $700^{\circ}C$, Deposition rate with SnCl4 partial pressure showed RidealEley behavir. It was found that SnO2 thin film deposited at the temperature above $400^{\circ}C$ had(110) and (301) plane preferred orientation with crystallinity of rutite structure. Electrical resisvity of SnO2 thin film decreased with increase increase of deposition temperature and showed minimum value of 10-3 ohm at $500^{\circ}C$and than largely increased increased with further increase of deposition temperture.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.36-41
• /
• 2000

$SnO-2$ thin films for thin film secondary battery anode were deposited n glass substrate with stain-less steel collector and charge/discharge experiments were conducted to investigate feasibility of $SnO-2$ thin film as a new anode material. The as-deposited films were pure $SnO-2$ phase which is not related to deposition condition. The grain size on the surface of as-deposited films increased with increase of oxygen partial pressure. However, the grain size did not show any change above oxygen partial pressure of 80:20. The surface roughness of the as-deposited films increased after decreasing because of resputtering effect of oxygen negative ion in plasma. All films showed typical $SnO-2$ anode characteristics which has a side effect at the first cycle, which is not related to the deposition condition. The charge/discharge experiments of 200cycles indicated that capacity of $SnO-2$ films depended on oxygen contents and surface roughness. The cycle characteristics was determined by initial charge/discharge reaction. The $SnO-2$ film with low initial capacity showed more stable cycle characteristics than film with high initial capacity.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권3호
• /
• pp.278-284
• /
• 1995

Thin fihn SnO$_{2}$ Gas Sensor was fabricated by electron-beam evaporation system and the target made by general firing method for the purpose of detecting gas components in air, especially methane gas. SnO$_{2}$ thin film was prepared on the polished alumina substrate which Pt interdigital electrode was precoated. The effects of annealing temperature and substrate temperature on the structural properties of SnO$_{2}$ thin film on glass were investigated using the X-ray diffraction. The good crystalline structure is formed when substrate temperature is 150[.deg. C] and annealing condition is 550[.deg. C], 1[hour]. And the sensing properties at various thickness of the SnO$_{2}$ thin film and the effects of PdCI$_{2}$ addition were also investigated. The good result is showed when the thickness is below 1000[.angs.] and the quantity of PdCI$_{2}$ addition is 4[wt%]. The thickness of SnO$_{2}$ thin film was measured by .alpha.-step and Elliopsometer.

• 마이크로전자및패키징학회지
• /
• 제6권2호
• /
• pp.45-49
• /
• 1999

이온빔 보조 증착법을 이용하여 제작한 $SnO_2$박막을 기저 물질로한 가연성 센서에 catalyst로 ultra-thin Pd layer를 이온빔 스퍼터링으로 흡착시켰다. 가연성 기체의 센싱 메카니즘에서 Pd 촉매의 역할을 정확하게 조사하기 위해서 진공 및 공기 상에서 annealing 함으로서 Pd 촉매의 초기 산화 상태를 조절하였다. 촉매가 순수한 금속 Pd 클러스터 상태로 존재하는 $SnO_2$센서의 경우에는 PdO 클러스터가 있는 것에 비해 높은 감응성을 보였다. 이것은 PdO 클러스터가 표면 acceptor로 작용을 하는 것으로 생각되며 $SnO_2$로 부터 Pd sub-channel을 통해 전자를 받아 센서의 감도를 낮추고 응답시간을 늦추는 것으로 생각된다.

• The Korean Journal of Ceramics
• /
• 제6권4호
• /
• pp.354-358
• /
• 2000

The SnO$_2$film was deposited on a corning glass 1737 substrate by plasma enhanced chemical vapor deposition using a gas mixture of SnCl$_4$, $O_2$, and Ar. The film thickness was measured using $\alpha$-step and was about 9400$\AA$. The conventional X-ray diffractometry and pole figure attachment were used to refine the crystal structure of SnO$_2$ thin film. Six pole figures, (200), (211), (310), (301), (321), and (411), were measured with CoK$_\alpha$ radiation in reflection geometry. The X-ray diffraction data were measured at room temperature using CuK$_\alpha$ radiation with graphite monochromator. The agreement between calculated and observed patterns for the normal direction of SnO$_2$ thin film was not satisfactory due to the severely preferred orientation effect. The Rietveld refinement of heavily textured SnO$_2$ thin film was successfully achieved by adopting the pole density distribution of each reflection obtained from the inverse pole figure as a correction factor for the preferred orientation effect. The R-weighted pattern, R$_wp$, was 15.30%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1939-1943
• /
• 2003

The precise structural analysis of $SnO_{2}$ thin film, which was prepared by PECVD and thickness 2400 ${\AA}$, was tried to do the structural refinement using X -ray diffraction data. The observed diffraction patterns of $SnO_{2}$ thin film had the strongly preferred orientation effect. WIMV method was used to correct the preferred orientation effect. The final weighted R-factor, $R_{WD}$ was 7.92 %. The lattice parameters, a = b == 4.7366(1) ${\AA}$ and c = 3.1937(1) ${\AA}$, were almost in accordance with ones of $SnO_{2}$ powder.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.846-850
• /
• 2003

Thin film $SnO_2$ Gas Sensor was fabricated by using ion beam sputtering and ultra thin film Pt catalyst of $45{\AA}$ was deposited on $SnO_2$ thin film. The effects of annealing temperature on the structural properies of $SnO_2$ were investigated using the X-ray diffraction. Using SEM, microstructures of thin film were investigated. The good gas sensitivity is shown when annealing condition is $650^{\circ}C$, 5hr and ultra thin film Pt catalyst thickness is $45{\AA}$.