• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.242-248
• /
• 1996

The properties of TiN/TiSi$_{2}$ bilayer formed by a rapid thermal annealing is investigated when thin SiO$_{2}$ film exists at the Ti-Si interface. The competitive reaction for the TiN/TiSi_2 bilayer occurs above 600 .deg. C. The thickness of the TiSi$_{2}$ layer decreases with increasing SiO$_{2}$ film thickness and also decreases with increasing anneal temperture When the competitive reaction for the TiN/TiSi$_{2}$ bilayer is occured by rapid thermal annealing, the composition of TiN layer represents TiN$_{x}$O$_{y}$ due to the SiO$_{2}$ layer at the Ti-Si interface but the structures of the TiN and TiSi$_{2}$ layers were not changed.d.d.

• 한국진공학회지
• /
• 제18권1호
• /
• pp.9-14
• /
• 2009

본 연구는 정방정계-$HfO_2$/Si 초격자의 계면 층 구조를 범밀도함수론 (density functional theory)을 이용하여 계산하였다. 입방정계-$HfO_2$는 Si 기판과 에피택시 접합을 위하여 a와 b축의 길이가 증가되면 c축의 길이가 2% 감소하여 정방정계 구조가 되었다. 정방정계-$HfO_2$와 Si 기판의 말단층에 따라서 8 개의 계면 층 모델이 생성되었다. 정방정계-$HfO_2$ (004)$_{1/4}$/Si $(004)_{3/4}$ 초격자구조가 에너지 관점에서 가장 안정하였고, 정방정계-$HfO_2$ $(004)_{1/4}$/Si (002) 초격자구조는 가장 불안정하였다. 에너지 관점에서 가장 불안정한 구조의 경우, 정방정계-$HfO_2$의 계면에 존재하는 2 개의 산소 원자가 Si 기판으로 이동하여 정방정계-$HfO_2$ 초격자구조에 2 개의 산소 공공이 생성되었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제16권9호
• /
• pp.65.1-65
• /
• 2003

The interface of zirconium oxide thin films on silicon is analyzed in detail for their potential applications in the microelectronics. The formation of an interfacial layer of ZrSi$\sub$x/O$\sub$y. with graded Zr concentration is observed by the x-ray photoelectron spectroscopy and secondary ion mass spectrometry analysis. The as-deposited ZrO$_2$/ZrSi$\sub$x/O$\sub$y//Si sample is thermally stable up to 880$^{\circ}C$, but is less stable compared to the ZrO$_2$/SiO$_2$/Si samples. Post-deposition annealing in oxygen or ammonia improved the thermal stability of as-deposited ZrO$_2$/ZrSi$\sub$x/O$\sub$y/Si to 925$^{\circ}C$, likely due to the oxidation/nitridation of the interface. The as-deposited film had an equivalent oxide thickness of∼13 nm with a dielectric constant of ∼21 and a leakage current of 3.2${\times}$10e-3 A/$\textrm{cm}^2$ at 1.5V. Upon oxygen or ammonia annealing, the formation of SiO$\sub$x/ and SiH$\sub$x/N$\sub$y/O$\sub$z/ at the interface reduced the overall dielectric constants.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.267-270
• /
• 2003

We have studied the interfacial diffusion phenomena and the role of ${\alpha}-Al_2O_3$ buffer layer as a diffusion barrier in the $Ba-ferrite/SiO_2$ magnetic thin films for high-density recording media. In the interface of amorphous Ba-ferrite ($1900-{\AA}-thick)/SiO_2$ thin film during annealing, the interfacial diffusion started to occur at ${\sim}700^{\circ}C$. As the annealing temperature increased up to $800^{\circ}C$, the interfacial diffusion abruptly proceeded resulting in the high interface roughness and the deterioration of the magnetic properties. In order to control the interfacial diffusion at the high temperature, we introduced ${\alpha}-Al_2O_3$ buffer layer ($110-{\AA}-thick$) in the interface of $Ba-ferrite/SiO_2$ thin film. During the annealing of $Ba-ferrite/{\alpha}-Al_2O_3/SiO_2$ thin film even at ${\sim}800^{\circ}C$, the interface was very smooth. The smooth interface of the film was also clearly shown by the cross-sectional FESEM. The magnetic properties, such as saturation magnetization 3nd intrinsic coercivity, were also enhanced, due to the inhibition of interfacial diffusion by the ${\alpha}-Al_2O_3$ buffer layer. Our study suggests that the ${\alpha}-Al_2O_3$ buffer layer act as a useful interfacial diffusion barrier in the $Ba-ferrite/SiO_2$ thin films.

• 한국재료학회지
• /
• 제21권2호
• /
• pp.120-124
• /
• 2011

Silicon heterojunction solar cells have been studied by many research groups. In this work, silicon heterojunction solar cells having a simple structure of Ag/ZnO:Al/n type a-Si:H/p type c-Si/Al were fabricated. Samples were fabricated to investigate the effect of transparent conductive oxide growth conditions on the interface between ZnO:Al layer and a-Si:H layer. One sample was deposited by ZnO:Al at low working pressure. The other sample was deposited by ZnO:Al at alternating high working pressure and low working pressure. Electrical properties and chemical properties were investigated by light I-V characteristics and AES method, respectively. The light I-V characteristics showed better efficiency on sample deposited by ZnO:Al by alternating high working pressure and low working pressure. Atomic concentrations and relative oxidation states of Si, O, and Zn were analyzed by AES method. For poor efficiency samples, Si was diffused into ZnO:Al layer and O was diffused at the interface of ZnO:Al and Si. Differentiated O KLL spectra, Zn LMM spectra, and Si KLL spectra were used for interface reaction and oxidation state. According to AES spectra, sample deposited by high working pressure was effective at reducing the interface reaction and the Si diffusion. Consequently, the efficiency was improved by suppressing the SiOx formation at the interface.

• 한국자기학회지
• /
• 제16권6호
• /
• pp.283-286
• /
• 2006

고밀도 자기기록용 Ba-페라이트/$SiO_{2}$ 자성박막에서 계면확산 장벽으로써 ${\alpha}-Al_{2}O_{3}$ 버퍼층의 역할을 연구하였다. 열처리동안 $1900{\AA}$의 두께를 가진 비정질 Ba-페라이트/$SiO_{2}$ 박막에서 계면확산은 약 $700^{\circ}C$에서 일어나기 시작하였다. 열처리온도를 $800^{\circ}C$까지 증가시켰을 때, 계면확산은 자기특성을 저하시킬 정도로 급격히 진행되었다. 고온에서의 계면확산을 억제하기 위하여, $110{\AA}$ 두께의 ${\alpha}-Al_{2}O_{3}$ 버퍼층을 Ba-페라이트/$SiO_{2}$ 박막의 계면에 증착하여 사용하였다. Ba-페라이트/${\alpha}-Al_{2}O_{3}/SiO_{2}$ 박막에서는 $800^{\circ}C$의 고온까지 열처리하여도 계면확산이 심각하게 일어나지는 않았다. ${\alpha}-Al_{2}O_{3}$ 버퍼층에 의하여 계면확산이 억제되기 때문에 Ba-페라이트 자성박막의 포화자속밀도와 보자력이 향상되었다. 따라서 Ba-페라이트/$SiO_{2}$ 박막의 계면에서 ${\alpha}-Al_{2}O_{3}$ 버퍼층은 $SiO_{2}$ 기판 성분의 계면확산 장벽으로 사용될 수 있다.

• Journal of Welding and Joining
• /
• 제21권2호
• /
• pp.35-41
• /
• 2003

Sintered alumina ceramics were joined by 2 kinds of SiO$_2$-CaO-A1$_2$O$_3$ glass solders having a similar expansivity as alumina. Wetting of glass/alumina was examined by sessile drop method. The observation of interface and bending strength related to alumina/glass/alumina systems were investigated by means of SEM/EDX and 4-point bending test. the result are summarized as follow: (1) Wetting of glass solders on alumina was good at temperatures higher than 145$0^{\circ}C$. (2) When the joining temperature wan high, diffusion and/or reactions between solder md alumina took place at the interface. These diffusions and reactions occurring at the interface greatly affected the bending strength of joining body. (3) Highest strength corresponding to 80% that of alumina was obtained by the solder of 35SiO$_2$-35CaO-30A1$_2$O$_3$(wt%) glass.

• 한국주조공학회지
• /
• 제17권1호
• /
• pp.28-35
• /
• 1997

SiC whisker and $Al_2O_3-SiO_2$ short fiber reinforced AC8A, AC8B and AC8B(J) marix composites were fabricated by squeeze casting method. Preform deformation, change of reinforcement volumefraction and formation of macro-segregation in two composites were investigated by using micro Vickers hardness test, analysis of macro and micro structures with OM, SEM and EDAX. $Al_2O_3-SiO_2$ short fiber preform manufactured with 5% $SiO_2$ binder in this study was considerably deformed and cracked, nevertheless, the short fibers were distributed homogeneously in the composites. In SiC whisker reinforced composites, on the other hand, preform deforming and cracking were not occurred, however, macro segregation zone formed along the infiltration routes by interface reaction during infiltration of molten metal into the preform was observed at center-low area in the composites. The decrease of hardness in the macro segregation zone resulted from the depletion of Si and Mg atoms.

• 한국진공학회지
• /
• 제7권1호
• /
• pp.35-42
• /
• 1998

100keV $O^+$이온 빔에 의해 형성된 separation by implanted oxygen(SIMOX) silicon on insulator (SOI)의 열처리 전후의 계면 구조를 high resolution transmission electron microscopy(HRTEM)을 이용하여 관찰하였다. 실리콘 주입 온도 $550^{\circ}C$에서 ~$5\times 10^{17}\textrm{cm}^{-2}O^+$를 주입한 직후의 계면은 매우 거칠고 산화물 석출, stacking fault, coesite $SiO_2$ 상 석출물 등 여러 가지 형태의 결함들을 가지고 있었다. 반면, 이것을 $1300^{\circ}C$에서 열처리한 후의 계면은 매우 편편하고 잘 정의된 계면으로 변하였다. 열처리후의 계면은 HRTEM을 통해서 3keV$O_2^\;+$이온 빔에 의해 형성된 산화막 계면, 그리고 게이트 산화막으로 사용되는 ~ 6nm열 산화막 계면과 비교하여 볼 때 비슷한 수준의 roughness를 보여 주었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 추계학술발표회
• /
• pp.110-110
• /
• 1997