• Current Research on Agriculture and Life Sciences
• /
• v.1
• /
• pp.55-65
• /
• 1983

The purpose of this study is to find out influences of several chemicals on the solubility of cocoon sericin in water, and there are several results of use to control the solubility of cocoon sericin in water. The results obtained are summarized as follows : The chemical which shows the strongest accelerating power of the solubility of cocoon sericin in water is Sodium Hydroxide (NaOH), the second is Potassium Hydroxide (KOH), the third is Sodium Silicate ($Na_2SiO_3$), and the weakest is Sodium Bicarbonate ($NaHCO_3$) in order among noticed silk-reeling accelerators. The chemical which shows the strongest inhibiting power of the solubility of cocoon sericin in water is Form Aldehyde (HCHO), the second is Ammonium Alum ($Al_2(SO_4)_2{\cdot}(NH_4)_2SO_4{\cdot}24H_2O$), the third is Acetic Acid ($CH_3COOH$), the weakest is Hydrochloric Acid(HCl) in order among noticed silk-reeling inhibitors. Particulary Hydrochloric Acid (HCl), which is expected to show strong inhibiting power of the solubility of cocoon sericin in water, shows accelerating power of the solubility of cocoon sericin at high temperature over 80 degrees of Celsius thermometer in water.

• Journal of the Korean Vacuum Society
• /
• v.3 no.4
• /
• pp.466-481
• /
• 1994

차세대 집적회로 제조공정에 있어 핵심기술인 선택적 단결정 실리콘 성장공정에 대한 이동현상, 열역학, 미시적 전산모사를 수행하여 다각적인 분석과 이해를 시도하였다. 첫째, 실리콘 단결정 성장 공 정에 가장 많이 사용되는 배럴 반응기를 대상으로 유한 요소법을 이용하여 이동현상적 이론연구를 수행 하였다. 반응기내의 기체속도 분포, SiH2Cl2 농도분포를 각각 구하였으며 압력, 기판온도, 총유량 HCl 유 량변화 등의주요공정변수가 증착율과 균일도 지수에 미치는 영햐을 고찰하였다. 이러한 연구를 통하여 저온, 저압, 총유량이 많고 첨가되는 HCl 유량이 작은 경우가 균일도 확보를 위하여 적합한 조업조건임 을 알수 있었다. 둘째 Si-H-Cl 계에 대한 열역학적 기체의 Cl/H비가 낮은 경우가 선택적 실리콘 증착 에 적합함을 알수 있었다. 셋째, Monte Carlo법을 이용한 선택적 실리콘 미세박막 성장패턴에 관한 이 론 연구를 수행하여 종횡비, 재방출, 표면확산에 따른 박막증착 패턴의 변화를 고찰하였으며 표면확산이 선택도 상실 현상의 중요한 원인이 될 수 있음을 발견하였다. 또한 최상의 선택도 확보를위해서는 낮은 부착계수와 낮은 표면확산계수를 유지해야 됨을 알수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.611-611
• /
• 2013

In this study, iron oxide nanoclusters layer (Nc) was prepared onto functionalized silicon substrate by wet method. The amine-terminated SAM fabricated on silicon substrate (APTMS/Si) was carried out by UV-treatment and immersed into the FeCl3/HCl aqueous solution. Then, Nc were immobilized onto oxidized SAM silicon substrate (SAMs/Si) through electrostatic interaction between cationic Nc and anionic SAMs/Si. This catalytic layer (Nc/SAMs/Si) was used to grow carbon nanotubes (CNTs). The characterization results clearly show that the well-graphitized CNTs were synthesized by using functionalized silicon substrate as a template having appropriate density of catalyst. These consequences show that SAM containing template is important to achieve the effective layer of catalyst to synthesize CNTs.

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.431-436
• /
• 1988

The properties of scid-resistance to boiling HCl, thermal expansion coefficient and softening temperature of mother glass and glass-ceramic of LAS systems were investigated at the contents of SiO2 varing from 57 to 67wt%. The nucleation and growth of crystalline phase of LAS compositions were carried out at 50$0^{\circ}C$ and $700^{\circ}C$. The crystalline phase jconsists of lithium alumino silicate, lithum meta silicate, lithium disilicate, $\alpha$-crystobalite and $\alpha$-quartz. Lithium alumino silicate(virgilite) is the major crystalline phase in the glass ceramics. The degree of acid resistant property was increased in proportion with the silica content for both glass and ceramics. Glass-ceramic gives lower acid-resistance and thermal expansion coefficient while softening temperature shows higher for glass-ceramic than for mother glass.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.319.1-319.1
• /
• 2016

Recently, the Al-doped ZnO (ZnO:Al) films are intensively used in thin film a-Si solar cell applications due to their high transmittance and good conductivity. The textured ZnO:Al films are used to enhance the light trapping in thin film solar cells. The wet etch process is used to texture ZnO:Al films by dipping in diluted acidic solutions like HCl or HF. During that process the glass substrate could be damaged by the acidic solution and it may be difficult to apply it for the inline mass production process since it has to be done outside the chamber. In this paper we report a new technique to control the surface morphology of RF-sputtered ZnO:Al films. The ZnO:Al films are textured with vaporized HF formed by the mixture of HF and H2SiO3 solution. Even though the surface of textured ZnO:Al films by vapor etching process showed smaller and sharper surface structures compared to that of the films textured by wet etching, the haze value was dramatically improved. We achieved the high haze value of 78% at the wavelength of 540 nm by increasing etching time and HF concentration. The haze value of about 58% was achieved at the wavelength of 800 nm when vapor texturing was used. The ZnO:Al film texture by HCl had haze ratio of about 9.5 % at 800 nm and less than 40 % at 540 nm. In addition to low haze ratio, the texturing by HCl was very difficult to control etching and to keep reproducibility due to its very fast etching speed.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.187-192
• /
• 2000

We prepared $SiO_2-Na_2O-R_mO_n$ thin films based on economics of water glass and investigated optical, mechanical properties of product thin films. Coating sol stabilized with 1 N HCl and 1 N $NH_4OH$, was fabricated by using water glass and calcium nitrate, and aluminum nitrate as starting materials. As-coated films on stainless steel, Si wafer and soda-lime-silica glass by spinning were finally annealed at 500, 750 and $900^{\circ}C$. Micro hardness and nitrogen content in film surface of annealed films were measured by Knoop hardness tester and EDX, respectively. Field Emission Scanning Electron Microscope (FE-SEM) and UV-VIS spectroscopy were adopted to analyze surface morphology and thickness and reflectance of our films.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.328-332
• /
• 1998

Anionic ring-opening polymerization of 3,4-[(dimethylsilyl)isopropyl]benzo-1,1-dimethyl-1-silacyclopentene in the presence of n-butyllithium and HMPA in THF at - 78 ℃ afforded poly[3,4-(dimethylsilylisopropyl)benzo-1,1-dimethyl-1-silapentene]. The characteristic Si-H stretching frequency in the IR is observed at 2100 cm-1. The polycarbosilane has been modified by chloroplatinic acid catalyzed addition of styrene to the polycarbosilane SiH units. Molecular weights and thermal properties of the polymers were compared. The sol-gel polymerization of 3,4-[(dimethoxysilyl)isopropyl]benzo-1,1-dimethoxy-1-silacyclopentene in the presence of aqueous HCl or NaOH in THF resulted in a cross-linked polysiloxane. The xerogel has a low surface area of 13-14 m2/g and is stable up to about 400 ℃ with only 5% weight loss under a nitrogen atmosphere.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1067-1072
• /
• 2002

A new polystyrene-divinylbenzene resin containing 2-(2-thiazolylazo)-5-dimethylamino-phenol (TAM) functional groups has been synthesized and its sorption behavior for nineteen metal ions, including Zr(Ⅳ),Hf(Ⅳ) and U(Ⅵ) has been investigated by batch and column methods. The chelating resin showed high sorption affinity for Zr(Ⅳ) at pH 1-5 and U(Ⅵ) at pH 4. Some parameters affecting the sorption of the metal ions have been detailed. The breakthrough and overall capacities were measured under optimized conditions. The overall capacities of Zr(Ⅳ), Th(Ⅳ) and U(Ⅵ), which showed higher than the other metal ions, were 0.90,0.84 and 0.80 mmol/g, respectively. The elution order of metal ions at pH 4 was evaluated as Zr(Ⅳ) > Th(Ⅳ) > U(Ⅵ) > Cu(Ⅱ) > Hf(Ⅳ) > W(Ⅵ) > Mo(Ⅵ) > In(Ⅲ) > Sn(Ⅳ) > Cr(Ⅲ) > V(Ⅴ) > Fe(Ⅲ). Quantitative recovery of most metal ions except Zr(Ⅳ) was achieved using 2M HNO3. Desorption and recovery of Zr(Ⅳ) was successfully performed with 2 M HClO4 and 2 M HCl.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.1
• /
• pp.32-37
• /
• 1986

Field experiments were carried out to investigate the effect of wollastonite and iron refinery slag on the paddy rice yield insandyloam soil in which available silica level is 56 ppm. The results are as follows: 1. Application of wollastonite and iron refinery slag reduced the tillering and the height of rice plant in the early growth stage, while promoted those in the late growth stage. 2. As the same amounts of wollastonite and iron refinery slag were applied, the effectiveness on yield increase was same between the two silicate fertilizers. 3. The recovery ratio as measured by absorbed $SiO_2$ on rice plant over applied $SiO_2$, was greater in wollastonite than in iron refinery slag. 4. The increasing of the ratio of $SiO_2$ over N absorbed in rice plant trends toward decreasing the infection rate of neck blast. 5. The left-over ratio of available $SiO_2$ in soil over applied $SiO_2$, was greater in iron refinery slag than in wollastonite. 6. As measured by silica soluble in 0.5 N-HCl solution, 1 kg application per 10a of both silicate fertilizers increased about 2.3 ppm in soil silica content after harvest, respectively.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.11-19
• /
• 2016

A fundamental study to recycle a Si-Sludge and waste copper nitrate solution acid solution generated by domestic electronic industries was carried out. The waste copper nitrate solution was used as the lixiviant to leach the metals like Cu, Ca, Fe, etc. from the sludge leaving Si in the residues. The effect of reaction temperature, time and pup density on the metals leaching from the sludge was investigated. To enhance the extractability of Fe, the effect of HCl, $HNO_3$ and $H_2O_2$ introduced additionally during the leaching was also examined. Considering the leaching efficiency of Fe along with Cu, the leaching conditions comprising of 200 ~ 225 g/L pulp density and $90^{\circ}C$ temperature for 30 min were optimized. Under this condition, 98.27 ~ 99.17% Cu could be dissolved in the leach liquor with the obtained purity of Si in the residues as 98.69 ~ 98.86 %. The study revealed that the leaching of Cu contained in the Si-Sludge with the waste copper nitrate solution is a plausible approach by which the obtained leach liquor can further be treated suitably to recover Cu as the high pure value-added products.