• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.685-695
• /
• 2004

The aim of this study was to evaluate the resistance to degradation and to compare the wear resistance characteristics of four composite resins in an alkaline solution. The resistance to degradation was evaluated on the basis of mass loss(%), degradation depth(${\mu}m$), Si loss(ppm) and wear depth. The brands studied were Heliomolar flow, Filtek supreme, Point4, Tetric flow. The results were as follows: 1. The sequence of the mass loss was in descending order by Heliomolar flow, Filtek supreme, Point4, Tetric flow. There was significant differences among the materials except Heliomolar flow and Filtek supreme. 2. The sequence of the degree of degradation layer depth was in descending order by Filtek supreme, Heliomolar flow, Tetric flow, Point4. There were significant differences among the materials except Heliomolar flow and Tetric flow. 3. The sequence of Si loss was in descending order by Filtek supreme, Heliomolar flow, Point4, Tetric flow. There were significant differences among the materials except Point 4 and Tetric flow. 4. The sequence of maximum wear depth was in descending order by Heliomolar flow, Point4, Fillet supreme, Tetric flow and there was increasing wear depth on soaking in 0.1N NaOH solution. 5. When observed with SEM, destruction of bonding between matrix and filler was observed and when observed with CLSM, the depth of degradation layer of specimen surface was observed. There results indicate that wear and hydrolytic degradation could be considered to be evaluation factors of composite resins.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.182-190
• /
• 2007

Statement of problem: Titanium has many advantages of high biocompatibility, physical properties, low-weight, low price and radiolucency, but it is incompatible with conventional dental porcelain due to titanium's oxidative nature. Many previous studies have shown that they used the method of sandblast for surface treatment prior to porcelain application, the researches are processing about the method of acid etching or surface coating. Purpose: The purpose of this research is to study the effect on bond strength of surface roughness between titanium and porcelain with the same surface topography. Material and method: In this study, we evaluated the bond strength by using 3-point bending test based on ISO 9693 after classified 8 groups - group P : polished with #1200 grit SiC paper, group S10 : $1.0{\mu}m$ surface roughness with sandblasting, group S15 : $1.5{\mu}m$ surface roughness with sandblasting, group S20 : $2.0{\mu}m$ surface roughness with sandblasting, group S25 : $2.5{\mu}m$ surface roughness with sandblasting, group S30 : $3.0{\mu}m$ surface roughness with sandblasting, group S35 : $3.5{\mu}m$ surface roughness with sandblasting, group E : $1.0{\mu}m$ surface roughness with HCl etching. Results: Within the confines of our research, the following results can be deduced. 1. In the results of 3-point bending test, the bond strength of sandblasting group showed significant differences from one of polishing group, acid etching group(P<.05). 2. The bond strength of sandblasting groups did not show significant differences. 3. After surface treatments, the group treated with sandblasting showed irregular aspect formed many undercuts, in the SEM photographs. The bond strength of sandblasting group was higher than 25 MPa, the requirement of ISO 9693. Conclusion: In above results, bond strength of titanium and low-fusing porcelain is influenced more to surface aspect than surface roughness. And titanium has clinically acceptable bond strength below surface roughness of $3.5{\mu}m$.

• Parasites, Hosts and Diseases
• /
• v.51 no.6
• /
• pp.703-710
• /
• 2013

To increase public health awareness for prevention of opisthorchiasis caused by eating raw freshwater fish, the distribution and abundance of Opisthorchis viverrini metacercariae (OV MC) was investigated in freshwater fish obtained from 20 provinces in northeastern Thailand between April 2011 and February 2012. A cross-sectional survey was conducted on 12,890 fish consisting of 13 species randomly caught from 26 rivers, 10 dams, and 38 ponds/lakes. Fish, were collected in each of the rainy and winter seasons from each province. Fish were identified, counted, weighed, and digested using pepsin-HCl. Samples were examined for OV MC by a sedimentation method, and metacercariae were identified under a stereomicroscope. OV MC were found in 6 species of fish; i.e., Cyclocheilichthys armatus, Puntius orphoides, Hampala dispar, Henicorhynchus siamensis, Osteochilus hasselti, and Puntioplites proctozysron from localities in 13 provinces. Among the sites where OV MC-infected fish were found, 70.0% were dams, 23.7% were ponds/lakes, and 7.7% were rivers. The mean intensity of OV MC ranged from 0.01 to 6.5 cysts per fish (or 1.3-287.5 cysts per kg of fish). A high mean intensity of OV MC per fish (>3 cysts) was found in 5 provinces: Amnat Charoen (6.5 cysts), Nakhon Phanom (4.3), Mukdahan (4.1), Khon Kaen, (3.5) and Si Sa Ket (3.4). In conclusion, OV MC are prevalent in natural cyprinid fish, with the infection rate varying according to fish species and habitats.

• Resources Recycling
• /
• v.29 no.1
• /
• pp.81-88
• /
• 2020

Recovery of gallium and indium from waste light emitting diodes has been emphasized gradually owing to high content of gallium and indium. This study was established the recovery of gallium (Ga³⁺) and indium (In³⁺) from waste gallium nitride was contained in waste light-emitting diodes. The procedure was divided into the following steps; characteristic analysis, alkaline roasting, and leaching. In characteristic analysis part, the results were used as a theoretical basis for the acid leaching part, and the chemical composition of waste light emitting diodes is 70.32% Ga, 5.31% Si, 2.27% Al and 2.07% In. Secondly, with reduction of non-metallic components by alkaline roasting, gallium nitride was reacted into sodium gallium oxide, in this section, the optimal condition of alkaline roasting is that the furnace was soaked at 900℃ for 3 hours with mixing Na₂CO₃. Next, leaching of waste light emitting diodes was extremely important in the process of recovery of gallium and indium. The result of leaching efficiency was investigated on the optimal condition accounting for the acid agent, concentration of acid, the ratio of liquid and solid, and reaction time. The optimal condition of leaching procedures was carried out for 2.0M of HCl liquid-solid mass ratio of 30 ml/g in 32minutes at 25℃ and about 96.88% Ga and 96.61% In were leached.

• Journal of Sericultural and Entomological Science
• /
• v.24 no.2
• /
• pp.55-72
• /
• 1983

These studies were done to find out any difference, ultrastructural, physical or chemical, between the shells of diapausing and non-diapausing eggs of the silkworm, Bombyx mori L. 1. From the electron-microscopic observation, the egg shells have four distinctive layers. In addition to the four layers, the shells in the diapausing eggs has another layer with low electron density on its surface. 2. The permeability of the egg shell to hydrochloride was much lower in diapausing egg than in non-diapausing egg. Also the permeability changed in the opposite directions with the egg age: the diapausing eggs decreased while non-diapausing ones increased. 3. The permeability increased when the diapausing egg shell was treated with HCl. When they were treated with ether, however, the increase in permeability was much smaller. It seems there was an ether soluble material involved in the content of the egg shell. 4. The diapausing eggs were also much more resistant to desiccation than the non-diapausing ones. The former, when treated with HCl or chilling, became less resistant to desiccation. 5. The positive histochemical response of the egg shell to PAS-Alcian blue and protein stainings suggests presence of abundant proteins and carbohydrates in the egg shell. On the other hand, the staining response to lipid was more positive in the inner layers than in the outer layer of the shell. 6. The egg shell adhesives seems to be mucopolysaccharides produced by colleterial glands, since the oviposited eggs showed a positive responses to carbohydrate and negative to lipid-staining chemicals, but not the mature oocytes in the ovarioles. 7. There were two bands on the electrophoretic pattern of the SH proteins extracted from the egg shells both in the diapausing egg and non-diapausing one: a slow moving major component and a fast moving minor one. However, the electrophoretic mobility showed a difference in the minor components between them. It is evident that the fast moving minor one of non-diapausing egg ran a little further than that of diapausing egg. 8. In amino acids analysis, no significant differences were found in their composition between diapausing and non-diapausing egg and SH proteins contain relatively more glycine and less cystine.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.5
• /
• pp.323-332
• /
• 2003

This study was carried out to provide information for the present status of soil pollution near abandoned old-zinc mining area through analysis of bound form and 0.1 N-HCl extractable concentrations of heavy metals in soils and plants. Feasibility of endemic plants for phytoremediation was evaluated by the investigation of vegetation in soils. Cd contents of the selected samples near old-zinc mining soils ranged from 0.2 to $42mg\;kg^{-1}$. Nonagricultural soils near the mining area contained great amounts of Zn, Pb, Cd, and Cu than the paddy and upland soils. Some Korean wild plants, Artemisia princeps, Artemisia montana, Erigeron canadensis, and Pueraria thunbergiana, were found to grow vigorously in the studied area. Among them, Artemisia princeps was selected as a possible phytoremediator for cleaning heavy metal contaminated soils. Artemisia princeps contained about 43 and $52mg\;kg^{-1}$ of Cd in their root and shoot as dry weight, respectively. Average contents of Cd in the rhizosphere soil, $15.68mg\;kg^{-1}$, was slightly higher than the soil-root interface soils, $14.1mg\;kg^{-1}$. Sequential extraction of Cd contaminated soils showed that average $2.4mg\;kg^{-1}$ (about 7%) of cadmium existed as exchangeable form and the average amounts increased as follows : adsorbed < organically bound < exchangeable << oxide carbonate << sulfide residual fractions. Amendment of organic by-product fertilizer in metal-contaminated soils promoted the growth of roots significantly as compared with the other treatments containing chemical fertilizer.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2000.06a
• /
• pp.189-201
• /
• 2000

접근성이란 특정 목적을 가진 통행자가 한 지점에서 다른 지점으로 얼마나 쉽게 갈 수 있는가 를 나타내는 척도를 말한다. 따라서 접근성은 주로 공간적인 거리나 시간이 가장 중요한 요인으로 작용하며 최근에는 공간적 거리보다는 접근시간이 더 중요한 접근성 척도로 사용되고 있다. 본 연구는 GIS공간분석기법과 접근성이론을 접목하여 도시시설의 적정후보지 평가방법을 정립한 후 현재 검토되고 있는 수도권 도심공항터미널 입지 후보지 중 어떤 후보지가 이용들의 총통행시간을 최소화하는 후보 지인가에 대해 평가해보았다. 평가 결과 다음과 같은 사실을 밝힐 수 있었다. 첫째, 수도권 전체로 볼 때 평균접근시간이 가장 양호한 후보지는 쌍문터미널(현 간이 도심공항터미널)이고, 2위는 현 삼성동 도심공항터미널과 강남고속터미널, 3위는 동서울터미널과 남서울터미널 순으로 나타났다. 둘째, 수도권전체 이용자들의 총통행시간을 최소로 하는 도심공항터미널 후보지는 접근성이 가장 양호한 쌍문동터미널이 아니라 현 서울역이 1위이고, 2위는 강남고속 터미널, 3위는 용산 역으로 나타났다. 셋째, 터미널 후보지간의 가중평균접근 시간은 도심인 서울시내에 입지한 후보지와 수도권 외곽에 입지 한 후보지간에 큰 차이가 없으나 총 이용자 접근시간은 서울시에 입지한 후보지보다 외곽의 후보지가 훨씬 높게 나타나 뚜렷한 차별성을 보이고 있다. 넷째, 최적후보지 1,2,3순위 모두 서울도심과 강남도심에 입지한 지역들로 나타나 교통의 접근성 보다는 아직 인구밀집도가 주요 도시시설의 입지결정에 주요한 결정요인 되는 것으로 나타났다.해석 시스템을 구축할 예정이다. 추후에는 하수도 관망해석 컴포넌트와 하수도 업무 컴포넌트와의 통합부분에 대한 연구가 진행되어야 할 것이다.7.0로 하고 표준(標準) EDTA 용액(溶液)을 소량(少量)넣고 8N-KOH로 pH $12{\sim}13$으로 하고 N-N 희석분말(稀釋粉末)을 지시약(指示藥) 으로써 표준(標準) EDTA 용액(溶液)으로 적정(滴定)하여 Ca 치(値)를 얻었다. Ca와 Mg의 합계결정치(合計決定値)와 Ca 적정치(滴定値) 차(差)로 Mg 치(値)를 얻었다. 음(陰) ion 구분(區分)으로부터 상법(常法)에 의하여 $MgNH_4PO_4$의 침전(沈澱)을 만들어서 HCl에 녹키고 일정량(一定量)의 표준(標準) EDTA 용액(溶液)을 넣어 pH 7.0로 한다음 완충액(緩衝液)으로 pH 10으로 하고 BT 지시약(指示藥)을 써서 표준(標準) Mg $SO_4$용액(溶液)으로 적정(滴定)하여 P 치(値)를 얻었다. 본법(本法)으로 Na-phytate를 분석(分析)한 결과(結果) Na-phytate의 분자식(分子式)을 $C_6H_6O_{24}P_6Mg_4CaNa_2{\cdot}5H_2O$라고 하였을 때의 이론치(理論値)에 비(比)하여 P가 98.9% Cark 97.1%, Mg가 99.1%이고 통계처리(統計處理)한 결과분석치(結果分析値)와 이론치(理論値)는 잘 일치(一致)된다. 그러나 종래법(從來法)에 의(依)한 분석치(分析値)는 이론치(理論値)에 비(比)하여 P가 92.40%, Cark 86.80

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.590-595
• /
• 2010

This study was conducted to investigate form of pollution brought by residual of mine tailing in agricultural land, and get basic information need for environment restoration. Guundong mine was completely restored region by implementation the soil pollution prevention plan. The districts is soils in Guundong mine vicinity the Mahul-ri, Muan-myeon, Miryang city, Gyeongsangnam-do. The nature of soil studied is the Shinra series andesite and mineral deposits which contain brimstone and heavy metals such as gold, silver, copper, lead, and zinc. The residual mine tailing and around agricultural land of heavy metals analyzed with 0.1N HCI solubility. The chemical properties of surface soil in upper part around mining area were pH 4.3-4.4, organic matter 19-21 g $kg^{-1}$, available $P_2O_5$ 85 mg $kg^{-1}$, exchangeable Ca 0.21-0.25 $cmol_c\;kg^{-1}$, exchangeable Mg 0.04 $cmol_c\;kg^{-1}$. The pH, exchangeable Ca, and Mg were increased with soil depth. The contents of 0.1N HCl extractable Cu, Cd, Pb, Cr, and Ni in soil (siteI) which influenced by outflow water from mine tailing were 97, 0.6, 197, 0.28 및 0.12 mg $kg^{-1}$, respectively. The vertical distribution of heavy metals in soil varied considerably among the metals kind. In case of siteI, The content of Cu, Pb, and Cr in soil was highest at surface soil. However, the content of Cd, Zn, Ni, and Mn was high at middle part of soil profile.

• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.700-708
• /
• 1996

Electroless plating technique was utilized to flip chip bonding to improve surface mount characteristics. Each step of plating procedure was studied in terms pf pH, plating temperature and plating time. Al patterned 4 inch Si wafers were used as substrstes and zincate was used as an activation solution. Heat treatment was carried out for all the specimens in the temperature range from room temperature to $400^{\circ}C$ for $30^{\circ}C$ minutes in a vacuum furnace. Homogeneous distribution of Zn particles of size was obtained by the zincate treatment with pH 13 ~ 13.5, solution concentration of 15 ~ 25% at room temperature. The plating rates for both Ni-P and Au electroless plating steps increased with increasing the plating temperature and pH. The main crystallization planes of the plated Au were found to be (111) a pH 7 and (200) and (111) at pH 9 independent of the annealing temperature.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.1
• /
• pp.17-24
• /
• 1978

A field experiment was conducted on a soil where habitual zinc deficiency has been observed, to investigate the effectiveness of two forms of zinc containing fertilizers: zinc enriched fused phosphate and zinc enriched compound fertilizer. The result of present study is summarized as following. 1. The sail used for the study contained relatively large amount of 1N $CH_2COONH_4$ extractable Ca and the pH was 7.03. Available Zn extracted by 0.1 HCl and available $SiO_2$ extracted by NaOAc were 3.35 ppm and 67.7 ppm respectively. 2. In control plots Zinc content of rice plant measured at 20 days after transplanting was 22-23 ppm, which was a little higher than the critical level (20ppm). But at harvesting stage it dropped to 15ppm. 3. The ratios of $P_2O_5/Zn$ and N/Zn tended to lower as the zinc applied to the soil increased. 4. Application of Zinc clearly increased the number of tillers and plant height as compared to the control. It was also observed that the plots received znic headed and matured earlier compared to the control plots by two weeks. 5. Application of zinc increased all of the yield components and the yield of rice. However, there were no statistical differences in yield and yield components among the forms and levels of zinc fertilizers.