• Analytical Science and Technology
• /
• v.13 no.3
• /
• pp.351-356
• /
• 2000

The decolorization of wastewater and the collecting conditions of final sludge from hanji production were investigated. Black wastewater (50 mL) from the process cooking with NaOH could be effectively decolorized by 2.0 g of $Ca(OCl)_2$ So, if excess bleach $Ca(OCl)_2$ used in bleaching process were recycled, the decolorization of wastewater by adding less $Ca(OCl)_2$ would be successfully realized. However, the decolorization by electrolyzed oxidation was ineffective. The final sludge could be effectively collected by polymer coagulator, but the addition of $Al_2(SO_4)_3$ was required, and the pure fibrous sludge could not be collected. Therefore, surfactants such as triethanolamine and Triton X-100 were used instead of polymer coagulator. The collecting yield was obtained about 85% as good as those by polymer coagulator. When mixed surfactants were used in collecting the final sludge, $Al_2(SO_4)_3$ was not required. In addition, as the pure fibrous sludge could be collected, the effective recycling of sludges would be done.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.554-559
• /
• 2007

In order to improve the reactivity for the direct synthesis of dimethyl carbonate (DMC) using methanol and carbon dioxide, the various additives were used in the DMC synthesis using $Ce_{0.8}Zr_{0.2}O_2$ catalyst, and then effect of the additives was investigated. The various additives were molecular sieves 3A and the compounds having the various functional groups such as sulfate, carbonate, nitrate and phosphate. As a result, the compound such as $K_2SO_4$ and $Na_2SO_4$ having sulfate group were the most effective additive among the various additives. When $K_2SO_4$ was used as an additive in the direct synthesis of DMC, the amount of DMC was about 0.91 mmol, which was the highest mount of DMC among using only-$Ce_{0.8}Zr_{0.2}O_2$ catalyst and the various additives.

• Clean Technology
• /
• v.21 no.3
• /
• pp.191-199
• /
• 2015

The SO_x emission from the ship diesel engines will do a negative influence to the human health and the environment. To reduce the negative environmental effect of the SO_x emission caused by the high traffic of ship movements, the SECA (SO_x emission control area) has been set on several province around world to carry out the severe emissions control and to meet the emissions control standard. To cut down the SO_x emission from the ships, the wet type scrubber is being used widely. In this work, we prepared a numerical model to simulate the spray type scrubber to study the motion of liquid droplets in the flow of the scrubber. For the analysis, the CFD (computational fluid dynamics) method was adopted. As a special topic of the study, we designed the wave plate type of mist eliminator to check the carry over of the uncontrolled water droplet to the exhaust. Numerical analysis is divided into two stages. At the first stage, the analysis was done on the basic scrubber without the mist eliminator, and then the second stage of analysis was done on the scrubber with the mist eliminator on several condition to check and compare with the basic scrubber. On the condition of the basic scrubber, 42.0% of the distributed water droplets were carried over to the exhaust. But by adding the designed droplet eliminator at the exhaust of the scrubber, only 3.4% of the distributed water droplets supplied to the scrubber was emitted to the atmosphere.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.6
• /
• pp.689-697
• /
• 2005

Hydrogen peroxide is a reservoir of OH radical which is the powerful oxidant in the atmosphere. Therefore, the status of the oxidizing atmosphere could be reflected on the concentration of $H_{2}O_{2}$. In this study, the distribution of $H_{2}O_{2}$ was determined during the intensive aircraft measurements over the Yellow sea in March, December 2002, April, November 2003 and March, October 2004. Flights covered from $124^{circ}E\;to\;129^{circ}E\;and\;35^{circ}N\;to\;37^{circ}N$, and extending to 3,000 m. The flight patterns were set properly to assess the altitudinal and longitudinal distribution for $H_{2}O_{2}$. $H_{2}O_{2}$ was extracted onto aqueous solution using a continuously flowing glass coil and analyzed by a high performance liquid chromatography (HPLC) accompanied with a fluorescence detector using postcolumn enzyme derivatization. Mixing ratios of $O_{3},\;NO_{x}\;and\;SO_{2}$ were measured in real time by commercial analysis instruments. Along the heights, the maximum concentration of $H_{2}O_{2}$ appeared around 1,500 m then gradually decreased with increasing altitude. The vertical behavior of ozone showed the similar trend to $H_{2}O_{2}$. The mean mixing ratio of $NO_{x}$ was about 2 ppbv and not showed clear vertical distribution patterns. The mean value of was the same as $NO_{x}$ however $SO_{2}$ appeared extreme concentration in low altitude. $H_{2}O_{2}\;and\;O_{3}$ showed even longitudinal distribution however $NO_{x}$ mixing ratio in land ($127^{circ}E$) was much higher than over the sea. $SO_{2}$ rather decreased with increasing longitude. $H_{2}O_{2}$ was in inverse proportion to $NO_{x}$ in spring and summer and $SO_{2}$ in spring, which indicated its significant role to NO and $SO_{2}$ oxidation pathways.

• Corrosion Science and Technology
• /
• v.18 no.6
• /
• pp.285-291
• /
• 2019

In this study, the corrosion characteristics of T22 and T92 steel were investigated in 6O₂ + 16CO₂ + 2SO₂ gas environment at 650 ℃. Corrosion characteristics were characterized by weight gain, oxide layer thickness, scanning electron microscope, optical microscope, energy dispersive X-ray spectroscopy, and X-ray diffraction. T22 and T92 steel tended to stagnate oxide layer growth over time. Oxidation kinetics were analyzed using the data of oxide layer thickness, and a regression model was presented. The regression model was significantly acceptable. The corrosion rate between the two steels through the regression model showed significant difference. The T92 steel was approximately twice as large as the time exponent and showed very good corrosion resistance compared to the T22 steel. In both steels, the oxide layer mainly formed a Fe-rich oxide layer composed of hematite (Fe₂O₃), magnetite (Fe₃O₄), and spinel (FeCr₂O₄). Sulfide segregation occurred in the oxide layer due to SO₂ gas. However, the locations of segregation for the T22 and T92 steel were different.

• Corrosion Science and Technology
• /
• v.18 no.3
• /
• pp.78-85
• /
• 2019

The International Maritime Organization (IMO) will administer a new 0.5% global sulfur cap on fuel content from 1 January 2020, lowering from the present 3.5% limit. Seawater $SO_x$ (sulfur oxide) scrubbing is especially spray scrubbing and a promising alternative to complying with the IMO regulation. However, the ionization of $SO_2$ (sulfur dioxide) and the $H_2SO_4$ (sulfuric acid) formed from $SO_3$ (sulfur trioxide) is proposed to accelerate corrosion of the internal seawater pipe. Apparently, the corrosion of the scrubber seawater piping system occurs in a severe and frequent manner. Hence, in this study, electrochemical measurement and weight loss of carbon steel (used as seawater pipe in most of the ships) in diluted sulfuric acid solution were investigated to determine corrosion rate, corrosion current density, corrosion potential, electrochemical behavior, and impressed-current density. Accordingly, the corrosion rate of carbon steel sheet in various diluted sulfuric acid solutions was observed to be greater than that in natural seawater, thus suggesting the fundamental data to deal with corrosion problems in scrubber seawater pipe.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1937-1940
• /
• 2010

Ionic liquids with halide anions were prepared and the dependency of halide anions on the $SO_2$ solubility of ILs was investigated. The study shows that the $SO_2$ solubility of ionic liquids lies in the range 1.91~2.22 $SO_2$/ILs mol ratio. $SO_2$ solubility in ionic liquids with varying halide anions follows the order Br > Cl > I. Theoretical investigation was also conducted at the B3LYP level using the Gaussian 03 program. From the theoretical consideration of the interaction between $SO_2$ and [EMIm]X (where X = Cl, Br, and I), it has been proposed that primary interaction of halide occurs with $C_2$-H of the imidazolium and S of $SO_2$. Experimental results further shows that the absorption and desorption process of $SO_2$ in ILs was reversible by the three cycles of the absorption at $50^{\circ}C$ and desorption at $140^{\circ}C$. The reversibility of $SO_2$ absorption was confirmed by FT-IR studies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.426-426
• /
• 2009

Diagnostic X-ray system is general and basic medical equipment to be used in mostly medical organizations, but being bombed of radioactivity is a big weak point when irradiates a X-ray to the human body so that ICRP restricted the radiation exposure tolerance of the human body. In order to reduce being bombed, the many research and development is now advanced. A lots of diagnostic X-ray machines have currently used due to the increase of occurrence efficiency of X-ray and precisely the output control by using the inverter which is a high speed switching semiconductors. For getting the confidence of the X-ray machine, the same radiation occurrence, same evaluation, and same irradiation condition are necessary when evaluates X-ray irradiation. It is the most important part for the accuracy of the test result and the patient safety. This paper has produced the high voltage occurrence system of full-wave rectification method by using the LC resonance inverter, and evaluated the irradiation reproducibility in order to use it in diagnosis of the patient.

• Journal of Korean Society for Quality Management
• /
• v.28 no.3
• /
• pp.18-30
• /
• 2000

Recent studies have shown that the $\bar{X}$ chart with variable sampling intervals(VSI) and the $\bar{X}$ chart with variable sample size(VSS) are much quicker than Shewhart $\bar{X}$ chart in detecting shiks in the process. Shewhart $\bar{X}$ chart has been beneficial to detect large shifts but it is hard to apply Shewhart $\bar{X}$ chart in detecting moderate shifts in the process mean. In this article the $\bar{X}$ chart using variable sample size(VSS) and variable sampling Intervals(VSI) has been proposed to supplement the weak point mentioned above. So the purpose of this paper is to consider finding the design parameters which minimize expected loss costs for unit process time and measure the performance of VSSI(variable sample size and sampling interval) $\bar{X}$ chart. It is important that assignable causes be detected to maintain the process controlled. This paper has been studied under the assumption that one cycle is from starting of the process to eliminating the assignable causes in the process. The other purpose of this article is to represent the expected loss costs in one cycle with three process parameters(sample size, sampling interval and control limits) function and find the three parameters.

• Journal of Korea Multimedia Society
• /
• v.15 no.10
• /
• pp.1205-1211
• /
• 2012

Recently, the evaluating method of the bone mineral density (BMD) in X-ray absorptiometry image has been studied for the early diagnosis of osteoporosis which is known as a metabolic disease. The BMD, in general, is evaluated by calculating pixel intensity in the bone segmented regions. Accurate bone region extraction is extremely crucial for the BMD evaluation. So, a X-Ray image enhancement is needed to get precise bone segmentation. In this paper, we propose an image enhancement method of X-ray image having multiple noise based sparse representation. To evaluate the performance of proposed method, we employ the contrast to noise ratio (CNR) metric and cut-view graphs visualizing image enhancement performance. Experimental results show that the proposed method outperforms the BayesShrink noise reduction methods and the previous noise reduction method in sparse representation with general noise model.