• The Korean Journal of Air & Space Law and Policy
• /
• v.27 no.2
• /
• pp.107-142
• /
• 2012

An aircraft has been one of the most important transportation means and disputes due to damage caused by delay of the aircraft happen many times out of ones related to the air transport. In 2011, the Air Transport Act in Commercial Law was established to regulate national air transport and the legislative system of air carrier's liability to handle delay of passengers or baggage was legislated here. Although there are some clauses related to the legislative system of air carrier's liability, they are very important because they deal with disputes due to damage caused by delay of the aircraft. The Air Transport Act in Commercial Law has a good point of adopting the global standard of 1999 Montreal Convention, but it has also a bad point of having the problems of 1999 Montreal Convention. There are some contents to be modified in the Air Transport Act in Commercial Law. First, the definition of 'Delay of Aircraft' needs to be enacted because it is important to materialize air carrier's liability due to damage caused by delay. Second, it is necessary to modify the clause in which air carrier's liability due to damage caused by delay of passengers is divided into two things, one is in case of national air transport and the other is in case of international air transport, and the limited amount of air carrier's liability in national air transport is eight times less than the latter because they are not so helpful to air carriers but too disadvantageous to aircraft passengers. Third, it is also necessary to amend the clause in which the limited amount of air carrier's liability due to damage caused by loss damage or delay of baggage has been legislated same without classifying the case into loss damage and delay, because they are generally different from each other in terms of extent of damage, therefore the limited amount of air carrier's liability by delay of baggage should be classified into in case of loss damage and in case of delay. It is desired that the Air Transport Act in Commercial Law including the clauses related to air carrier's liability by aircraft damage be developed continually by sufficient study and discussion about the necessity of amending it such as the one mentioned above.

• Economic and Environmental Geology
• /
• v.2 no.4
• /
• pp.73-90
• /
• 1969

The area studied is a southwestern part of Okcheon geosynclinal zone which streches diagonally across the Korean peninsula in the mid-central parts of South Korea, and is bounded by Charyeong mountain chains in the north and by Sobaek mountain chains in the south. The general trend of the zone is of NE-SW direction known as Sinian direction. Okcheon system of pre-Cambrian age occupies southwestern portion of Okcheon geosynclinal zone, and Choseon and Pyeongan systems of Cambrian to Triassic age in northeastern portion of the zone. It was defined by the writer that the former was called "Okcheon Paleogeosynclinal zone" and the latter "Okcheon Neogeosynclinal zone," although T. Kobayashi named them "Metamorphosed Okcheon zone" and "Non-metamorphosed Okcheon zone" respectively and thought that sedimentary formations in both zones were same in origin and of Paleozonic age, and C.M. Son also described that Okchon system was of post-Choseon (Ordovician) and pre-Kyeongsang (Cretaceous) in age. According to the present study two zones are separated by great fault so that the geology in both zones is not only entirely different in origin and age, but also their geolosical structures are discontinuous. Stratigraphy and structure of Okcheon system are clearly established and defined by the writer and its age is definitely pre-Cambrian. It is clarified by present study that the meta-sediments in and at vicinity of Charyeong mountain chains are correlated to Weonnam series of pre-Cambrian age which occupies and continues from northeast to southwest in and at south of Sobaek mountain chains, and both metasediments constitute basement of Okcheon system. Pyeongan, Daedong and Kyeongsang systems were deposited in few narrow intermontain basins in Okcheon paleogeosynclinal zone after it was emerged at the end of Carboniferous period. Granites of Jurassic and Cretaceous ages and volcanics of Cretaceous age are cropped out in the zone. Jurassic granite is aligned generally with the trend of Okcheon geosynclinal zone, whereas Cretaceous granite lacks of trend in distribution. Many isoclinal folds and thrust faults caused by Taebo orogeny at the end of Jurassic period are also parallel with Sinian directieon and dip steeply to northwest. Charyeong, Noryeong, Sobaek, and Deogyu mountain chains are located in areas of anticlinorium, and Kyongsang system in narrow synclinal zones. Folds in Okcheon neogeosynclinal zone are generally of N 70-80W direction but deviate to Sinian direction at the western parts of the zone. This phenomena is interpreted by the fact that the folds were originated by Songrim disturbance at the end of Triassic period and later partly modified by Taebo orogeny. Thrust faults of Taebo orogeny coentinue from Okcheon paleogeosynclinal zone into neogeosynclinal zone, forming imbricated structure as previously described. Strike-slip faults perpendicular to Sinian direction and shear faults diagonally across it by 55 degrees also prevail in neogeosynclinal zone. It is concluded from viewpoints on geology and geological structure that l)Okchon geosyncline had changed its location and affected by numerous disturbances through geologic time, and 2)mountain chains in the area such as Charyeong, Noryeong, Sobaek, and Deogyu were originated as folded mountains. Differing from others, however, Sobaek range was probably formed at the time of Songrim disturbance and modified later by Taebo orogeny. It is cut by Danyang-Jeomchon fault at the vicinity of Joryeong near Munkyeong village and does not continue to southwest beyond the fault, whereas southwestern portion of erstwhile Sobaek range continues to Taebaek rangd northeastward from Deogyusan passing through Sangju, Yecheon, and Andong. From these evidences, the writer has newly defined the erstwhile Sobaek range in such a way that Sobaek range is restricted only to northeastern portion and Deogyu range is named for the southwestern portion of previous Bobaek range.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.2
• /
• pp.1-23
• /
• 2018

This study aims to propose a way for evaluating thermal environment vulnerability associated with policy to improve thermal environment. For this purpose, a variety of indices concerning thermal vulnerability assessment and adaptation policies for climate change applied to 17 Korean cities were reviewed and examined. Finally, 15 indices associated with policies for improving thermal environment were selected. The selected indices for thermal vulnerability assessment were applied to Daegu Metropolitan City of South Korea as a case study. As results, 15 vulnerability maps based on the standardized indices were established, and a comprehensive map with four grades of thermal vulnerability were established for Daegu Metropolitan City. As results, the area with the highest rated area in the first-grade(most vulnerable to heat) was Dong-gu, followed by Dalseo-gu and Buk-gu, and the highest area ratio of the first-grade regions was Ansim-1-dong in Dong-gu. Based on the standardized indices, the causes of the thermal environment vulnerability of Ansim-1-dong were accounted for the number of basic livelihood security recipients, the number of cardiovascular disease deaths, heat index, and Earth's surface temperature. To improve the thermal environment vulnerability of Ansim-1-dong, active policy implementation is required in expansion and maintenance of heat wave shelters, establishment of database for the population with diseases susceptible to high temperature environments, expansion of shade areas and so on. This study shows the applicability of the vulnerability assessment method linked with the policies and is expected to contribute to the strategic and effective establishment of thermal environment policies in urban master district plans.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.6
• /
• pp.473-478
• /
• 2003

This study was conducted to clarify the effects of duck free-ranging time on the growth and behavior patterns of duck, pH and dissolved oxygen of irrigation water, and growth and yield of the rice plants in paddy fields. Two paddy fields with each 5 aye were used for 12 hours duck free-ranging plot (12HFR) and 24 hours duck free-ranging plot(24HFR). Body weight gain of the duck was not different between 12HFR and 24HFR. Eating and feather grooming behavior in the 12HFR were significantly longer than those of 24HFR, but other behavior patterns were not so. Working behavior and activities of duck in paddy fields tended to be longer in the 12HFR than in 24HFR. However, any difference was not found on staying time of duck in paddy fields. Although it was not statistically significant, pH and dissolved oxygen of irrigation water tended to be higher in the 12HFR than in 24HFR. The plant height of rice in the 12HFR was significantly shorter than that of 24HFR during the latter half period. The number of tillers per hill was significantly increased in the 24HFR than in 12HFR. The shoot dry weight of rice in the 12HFR was significantly less than in the 24HFR during the heading stage of rice plant, but the root dry weight was not different. The number of spikelets per panicle was significantly less in the 12HFR than in 24HFR, however the percentage of ripened grains was significantly higher in the 12HFR. The yield of rice was not significantly different between the treatments. In conclusion, the free-ranging time of duck for 12 hours in paddy fields promoted eating and working behavior of the ducks. Free-ranging time did give effects on rice traits such as the number of tillers per hill, plant height, shoot dry weight of the rice plant, and spikelet number and percentage of ripened grain. However, the duck growth, pH and dissolved oxygen of irrigation water, and paddy rice yield were not affected by duck free-ranging time. These results might suggest that almost same effect as in 24 hours of free-ranging can be obtained with only 12 hours of free-ranging in daytime.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.19-29
• /
• 2006

As the security of personal information is becoming more important in mobile phones, we are starting to apply iris recognition technology to these devices. In conventional iris recognition, magnified iris images are required. For that, it has been necessary to use large magnified zoom & focus lens camera to capture images, but due to the requirement about low size and cost of mobile phones, the zoom & focus lens are difficult to be used. However, with rapid developments and multimedia convergence trends in mobile phones, more and more companies have built mega-pixel cameras into their mobile phones. These devices make it possible to capture a magnified iris image without zoom & focus lens. Although facial images are captured far away from the user using a mega-pixel camera, the captured iris region possesses sufficient pixel information for iris recognition. However, in this case, the eye region should be detected for accurate iris recognition in facial images. So, we propose a new fast iris detection method, which is appropriate for mobile phones based on corneal specular reflection. To detect specular reflection robustly, we propose the theoretical background of estimating the size and brightness of specular reflection based on eye, camera and illuminator models. In addition, we use the successive On/Off scheme of the illuminator to detect the optical/motion blurring and sunlight effect on input image. Experimental results show that total processing time(detecting iris region) is on average 65ms on a Samsung SCH-S2300 (with 150MHz ARM 9 CPU) mobile phone. The rate of correct iris detection is 99% (about indoor images) and 98.5% (about outdoor images).

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.65-70
• /
• 2005

Many case histories of re-liquefaction phenomena seem to support the idea that sand deposits, if they once have been liquefied, could be reliquefied again by a subsequent earthquake even though the earthquake is smaller than the previous one. The magnitude of the strains induced in the initial liquefaction has a significant influence on the resistance of the sample to re-liquefaction. The deposits undergoing liquefaction experience large shear strain during liquefaction. And this previous strain changes the microstructure into highly anisotropic structure such as columnlike structure and connected voids. This type of anisotropy is so unstable that it can reduce re-liquefaction resistance. It is blown that the extent of anisotropic structural change depends on the gradation characteristics of ground. The purpose of this study is to estimate the correlation between the gradation characteristics of the sand and the ratio of re-liquefaction resistance to liquefaction resistance. In this study, 1-g shaking table tests were carried out on five different kinds of sands. During the tests the values of excess pore pressure at various depths and surface settlements were measured. Re-liquefaction resistances were not affected by the initial void ratio and the effective confining pressures, and the deposits of all test sands which had once been liquefied were reliquefied in the cyclic loading number below 1 to 1.5. The ratio of re-liquefaction resistance to liquefaction resistance linearly decreased as $D_{10}/C_u$ increased, and was constant as about 0.2 above the value of $D_{10}/C_u$, 0.15 mm.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.2
• /
• pp.113-136
• /
• 2020

Worldwide, so-called 'over-booking' of Air Carriers is established in practice. Although not invalid, despite their current contracts, passengers can be refused boarding, which can hinder travel planning. The Korean Supreme Court ruled that an airline carrier who refused to board a passenger due to over-booking was liable for compensation under the "Nonperformance of obligation". But what the court should be thinking about is when the benefit(transport) have been disabled. Thereforeit may be considered that the impossibility of benefit (Transport) due to the rejection of boarding caused by 'Over-booking' may be not the 'subsequent impossibility', but not the 'initialimpossibility '. The legal relationship due to initial impossibility is nullity (imposibilium nulla est obligation). When benefits are initial impossibile, our civil code recognizes liability for damages in accordance with the law of "Culpa in Contrahendo", not "nonperformance of obligation". On this reason, the conclusion that the consumer will be compensated for the loss of boarding due to overbooking by the Air Carrier is the same, but there is a need to review the legal basis for the responsibility from the other side. However, it doesn't matter whether it is non-performance or Culpa in Contrahendo. Rather, the recognition of this compensation is likely to cause confusion due to unstable contractual relationships between both parties. Even for practices permitted by Air Carriers, modifications to current customary overbooking that consumers must accept unconditionally are necessary. At the same time, if Air Carriers continue to be held liable for non-performance of obligations due to overselling tickets, it can be fatal to the airline business environment that requires overbooking for stable profit margins. Therefore, it would be an appropriate measure for both Air Carriers and passengers if the Air Carrier were to be given a clearer obligation to explain (to the consumer) and, at the same time, if the explanation obligation is fulfilled, the Air Carrier would no longer be forced to take responsibility for overbooking.

• Archives of design research
• /
• v.17 no.2
• /
• pp.77-86
• /
• 2004

User-Centered Design Approach plays important role in dealing with usability issues for developing modern technology products. Yet it is still questionable whether the User-Centered approach is enough for the development of successful consumer contents since the User-Centered Design is originated from the software engineering field where meeting customers' functional requirement is the most critical aspect in developing a software. However, modern consumer market is already saturated and in order to meet ever increasing consumer requirements, the User-Centered Design approach needs to be expanded. As a way of incorporating the User-Centered Approach into the consumer product development, Jordan suggested the 'Pleasure-based Approach' in industrial design field, which usually generates multi-dimensional user requirements: 1)physical, 2)cognitive, 3)identity and 4) social. It is the current tendency that many portal and community service providers focus on fulfilling both functional and emotional needs for users when developing new items, contents and services. Previously fulfilling consumers' emotional needs solely depend on visual designer's graphical sense and capability. However, taking the customer-centered approach on withdrawing consumers' unknown needs is getting critical in the competitive market environment. This paper reviews different types of user research techniques and categorized into 6 ways based on Kano(1992)'s product quality model. Based on his theory, only performance factors, such as suability, can be identified through the user-centered design approach. The user-centered design approach has to be expanded to include factors include personality, sociability, pleasure, and so on. In order to identify performance as well as excellent factors through user research, a user-research framework was established and tested through the case study, which is ' the development of new online service for teens '. The results of the user research were summarized at the end of the paper and the pros and cons of each research techniques were analyzed.

• Journal of Science Education
• /
• v.36 no.2
• /
• pp.381-393
• /
• 2012

This study was analyzed that what kind of elements for STEAM, except scientific commonsense, are contained in 2009 revised chemistry textbooks I for high school students. So first, elements of STEAM in textbooks were examined by following three sections; by publishing company, each unit and area of textbook. For reference, new sub-elements of STEAM were set because existing elements of STEAM is incongruent with current textbooks. As a result, most chemistry textbooks included elements of STEAM properly for inter-related learning with the other fields. Every textbook had its unique learning methods for utilizing elements of STEAM and they were unified as one way. Depending on textbooks, learning methods were little bit different from the others. Also, detailed elements of STEAM contained in textbooks were classified just 14 types. And they were even focused on a few elements according to sort of textbook. Thus, it seemed that there was a certain limitation of current education of STEAM in chemistry Field. By the unit, according to the curriculum, contained elements of STEAM were different. Almost all elements of STEAM were located in I section. Consequently, it is difficult to include elements of STEAM if mathematics or history were not existed in curriculum. Lastly, by the area, most of all elements of STEAM were included in reference section. Almost all elements of STEAM were focused on art and culture. Thus, STEAM was used for utilization about chemical knowledge in substance. Otherwise, convergence training for approach method was not enough in chemical knowledge.

• Journal of Hospice and Palliative Care
• /
• v.10 no.3
• /
• pp.128-136
• /
• 2007

Purpose: The purpose of this study is to investigate the current state of the home-based cancer patient management project of public health centers throughout the country. The results of the investigation is employed to identify obstacles to the execution of the program and, finally, to develop an efficient management program of home-based cancer patients. Methods: Data on the home-based cancer patient management project were collected and analyzed through visiting interviews or telephone interviews with 225 public health centers throughout the country for six months from July to December, 2006. Results: Obstacles to the present execution of the home-based cancer patient management project were identified. Some of them are : (1) patients' low trust in cancer patient management by local health centers, (2) absence of programs customized to local communities, (3) lack of personnel and vehicles for home-based cancer patient management, (4) lack of education program for personnel in charge of home-based cancer patient management, (5) problems in public health doctors, weak connection to private medical institutions, (6) absence of medical institutions and hospice facilities for cancer patients, and (7) non-standardized volunteer workers, so on. Considering all these problems, some effective management methods are proposed. The basic concept is to keep the autonomy and variety of the local helath centers. And based on this concept, three models of (1) public health center controlled model, (2) medical institutions and hospice facilities-entrusted model and (3) medical institutions and hospice facilities-cooperative model are developed. Conclusion: By adopting an adequate model among proposed three models, the public health centers are expected to achieve an efficient utilization of material resources and manpower. In addition, by inventing their own programs that are proper for the local societies, they can improve the home-based cancer patient management.