• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.324-324
• /
• 2010

최근에는 압전체의 환경오염 문제의 해결 및 가격경쟁력을 갖추기 위해서 비납계 압전체에 대한 연구가 활발히 진행되고 있다. (Na,K)$NbO_3$ 계는 페로브스카이트 구조를 가지는 비납계 세라믹스로 현재 가장 많이 연구되고 있는 물질 중의 하나이다. 본 연구에서는 압전성이 우수한 $(Na_{0.44}K_{0.52}Li_{0.04})(Nb_{0.9}Ta_{0.04}Sb_{0.06})O_3$ 조성에 CuO, $Cu_2O$ 등의 Cu 산화물을 첨가하였을 때의 전기기계결합계수, 기계적품질계수, 비유전율, 압전전하상수, 문극-전계 이력곡선 (P-E hysteresis curve) 등을 변화를 평가하고자 하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.173-173
• /
• 2013

최근에 고효율의 형광체를 개발하고자 무기물 모체에 주입된 희토류 이온의 발광에 대한 연구가 급부상하고 있다. 형광체는 고휘도, 넓은 시청 각도와 저 비용으로 인하여 대형 평판 디스플레이 분야로 그 응용성을 확장하는 플라즈마 디스플레이 패널 제작에 있어서 매우 중요한 물질이다. 현재 적색 형광체로 널리 사용되고 있는 발광 물질은 YBO3:Eu3+ 혹은 (Y,Gd)BO3:Eu3+ 형광체이지만, Eu3+ 이온이 중심대칭의 자리에 위치하기 때문에, Eu3+ 이온의 5D07F1 전이에 의한 주황색의 발광 세기가 5D07F2 전이에 의한 적색의 세기보다 강하여 고품질의 색상을 구현하는데 상당한 어려움이 있다. 이러한 문제점을 해결하기 위하여 새로운 모체 격자를 갖는 적색, 녹색, 청색 형광체 개발에 많은 노력이 집중되고 있다. 본 연구에서는 형광체 합성시 중요한 변수의 하나인 소결 온도가 새로운 다양한 색을 방출하는 형광체 분말 CaSiO4:RE3+ (RE=Eu, Sm, Tb, Dy, Ce)의 특성에 미치는 영향을 조사하였다. CaSiO4:RE3+ (RE=Eu, Sm, Tb, Dy, Ce) 형광체 분말 시료는 초기 물질 CaO (99.99%), SiO2 (99.99%), Eu2O3 (99.99%), Sm2O3 (99.9%), Tb4O7 (99.9%), Dy2O3 (99.9%), CeO2 (99.9%)을 화학적량으로 준비하였다. 볼밀, 건조 작업을 한 후에, 시료를 막자사발에 넣고 분쇄하여 3시간의 하소 공정과 5시간의 소결 공정을 수행하였다. 이때 소결 온도를 변수로 선택하여 각각 $800^{\circ}C$, $900^{\circ}C$, $1,000^{\circ}C$, $1,100^{\circ}C$에서 소결 작업을 수행하여 합성 분말의 구조, 표면, 광학적 특성을 측정하여 소결 온도가 미치는 영향을 조사하였다. Eu3+가 도핑된 CaSiO4 형광체 분말의 경우에, 발광 스펙트럼은 597, 618, 655, 707 nm에서 관측되었으며, 소결 온도가 $800^{\circ}C$에서 $1,100^{\circ}C$로 증가함에 따라 모든 발광 스펙트럼의 세기는 순차적으로 증가함을 나타내었다. Tb3+가 도핑된 CaSiO4 형광체 분말의 경우에 관측된 발광 스펙트럼은 주 피크인 549 nm를 중심으로 하여 세기가 상대적으로 작은 493, 592, 626 nm의 피크들이 관측되었으며, 소결 온도가 증가함에 따라 전반적으로 발광 세기들이 증가하는 경향을 나타내었다. Sm3+가 도핑된 CaSiO4 형광체의 경우에, 발광 스펙트럼은 전형적인 Sm3+이온에 의한 전이 신호들이 605, 570, 653 nm에서 나타났다. 발광 스펙트럼의 세기는 소결 온도에 비례하여 증가하였다. Ce3+가 도핑된 경우에 발광 스펙트럼은 소결 온도에 관계없이 401 nm에서 관측되었으며, 소결 온도에 따라 발광 세기의 변화가 나타났다. 이 실험 결과로 부터, 합성시 적절한 소결 온도의 선택이 고발광 효율의 형광체를 제작하는데 있어서 매우 중요한 요소가 됨을 확인할 수 있었다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.115-122
• /
• 2010

In this study, the removal of Cs and Tc from a simulated fission products (FP) solution which were co-dissolved with U during the oxidative-dissolution of spent fuel in a mixed carbonate solution of $(Na_2CO_3-NaHCO_3)-H_2O_2$ was investigated by using a selective precipitation method. As Cs and Tc might cause an unstable behavior due to the high decay heat emission of Cs as well as the fast migration of Tc when disposed of underground, it is one of the important issues to removal them in views of the increase of disposal safety. The precipitation of Cs and Re (as a surrogate for Tc) was examined by introducing sodium tetraphenylborate (NaTPB) and tetraphenylphosponium chloride (TPPCl), respectively. Precipitation of Cs by NaTPB and that of Re by TPPCl were completed within 5 minutes. Their precipitation rates were not influenced so much by the temperature and stirring speed even if they were increased by up to $50^{\circ}C$ and 1,000 rpm. However, the pH of the solution was found to have a great influence on the precipitation with NaTPB and TPPCl. Since Mo tends to co-precipitate with Re at a lower pH, especially, it was effective that a selective precipitation of Re by TPPCl was carried out at pH of above 9 without co-precipitation of Mo and Re. Over 99% of Cs was precipitated when the ratio of [NaTPB]/[Cs]>1 and more than 99% of Re, likewise, was precipitated when the ratio of [TPPCl]/[Re]>1.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2209-2213
• /
• 2009

$REBa_{2}Cu_{3}O_{7-d}$(REBCO) coated conductors(REBCO CCs) have been studied for electric power applications which require high current density wires. As long as the critical transition temperature(Tc) is concerned, REBCO CCs with large $RE^{3+}$ ions have been expected to have better current transport properties than those with smaller $RE^{3+}$ ions. For this reason, REBCO's with large $RE^{3+}$ ions which include GdBCO, NdBCO and SmBCO have been mainly considered as the superconducting layer of CCs. On the other hand, REBCO's with smaller $RE^{3+}$ions are expected to have advantages in the fabrication process of CCs because of the lower melting temperature. But it has not yet been made clear which REBCO is the most suitable for the superconducting layer of CCs. In this study, we investigated the current transport properties of REBCO CCs with small $RE^{3+}$ ion and advantages of using that in the CC fabrication process. Thin films of TmBCO, which has smaller $RE^{3+}$ion than most other $RE^{3+}$ ions, were fabricated on buffered metal substrate as the superconducting layer of CC by PLD process. TmBCO CC shows critical current density (Jc (77 K, sf) = $2.3\;MA/cm^2$) high enough to be utilized for application in electric power devices. Compared with previous experiments using the same PLD system, deposition temperature was approximately $20^{\circ}C$ lower than NdBCO thin films on buffered metal substrates.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.10a
• /
• pp.170.2-170
• /
• 2000

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.3
• /
• pp.275-280
• /
• 2002

The peculiarities of using Self-propagating High-temperature Synthesis (SHS) and solid-stave chase synthesis for production of high temperature superconductor materials were discussed. Oxide superconductors with general formula of $ReBa_2Cu_3O_{7-x}$ (Re=Y, Sm) haute been made by using barium oxide initial powder instead of traditional barium carbonate. Phenomena observed during the grinding of the reactants mixture are presented. Mechano-chemical activation - as a pre-treatment of the reactants mixture - strongly influences the kinetic parameters, the reaction mechanism, and the composition and structure of the final product.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.193-195
• /
• 2005

[ $0.96[Bi_{0.5}(Na_{0.84}K_{0.16})_{0.5}TiO_3]+0.04SrTiO_3+0.3wt%Nb_2O_5+0.2wt%La_2O_3+xwt%ZnO$ ], were studied in order to develope the superior piezoelectric properties of Lead-free piezoelectric ceramics. With increasing amount of ZnO addition, density showed the maximum value of 5.79(g/$cm^3$) at 0wt% ZnO addition, and electromechanical coupling factor($k_p$) and dielectric constant decreased, and mechanical quality factor($Q_m$) increased and showed the maximum value of 280 at 0.4wt% ZnO addition.

• Korean Journal of Materials Research
• /
• v.15 no.6
• /
• pp.413-418
• /
• 2005

Perovskite $Pb(Ni_{1/3}Nb_{2/3})O_3-Pb(Zr,Ti)O_3[PNN-PZT]$ ceramics were synthesized by conventional ceramic processing technique. In order to modify piezoelectric properties for sensor application in this system, NiO addition was considered to provide $Ni^{+2}$ as an acceptor, which was known to occupy with B site in the structure. The effect of NiO addition up to $8\;mol\%$ on the following piezoelectric properties as well as sintering properties was investigated. When NiO added more than $1\;mol\%$, average grain size was decreased and second phase was found to form. Moreover, the second phase caused decrease in relative dielectric constant $(\varepsilon_{33}T/\varepsilon0)$, electro-mechanical coupling factor $(k_p)$, and piezoelectric charge constant $(d_{33})$, while increasing mechanical quality factor $(Q_m)$. When $1\;mol\%$ NiO was added, density, dielectric properties and piezoelectric properties were abruptly increased.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.3
• /
• pp.347-353
• /
• 2019

The composition of the reduced fuel produced in the electrolytic reduction process of pyroprocessing affects the concentration change of $UCl_3$, an important operating variable of the electrorefining process. In this study, we examined the concentration change of $UCl_3$ in the electrorefiner according to the content of TRU and RE elements in the reduced fuel and the concentration of $Li_2O$ introduced in the electrorefiner accompanied with the reduced fuel. Considering only the TRU and RE elements, the concentration of $UCl_3$ decreased with increasing the number of electrorefining operation batch. In order to operate one campaign (20 batches) of electrorefining process, it was found that additional injection of $UCl_3$ should be conducted more than 3 times. On the other hand, the concentration of $UCl_3$ in the electrorefiner changed significantly depending on the concentration of $Li_2O$ and, accordingly the number of operable electrorefining batches decreased rapidly, showing that the concentration of $Li_2O$ is an important operating variable in electrorefining. Therefore, the results of this study show that to maintain the concentration of $UCl_3$ in the electrorefiner, the operation mode should be set by taking into account the effect of $Li_2O$ as well as the TRU and RE elements contained in the reduced fuel.

• Korean Journal of Materials Research
• /
• v.15 no.7
• /
• pp.453-457
• /
• 2005

Piezoelectric properties of $Pb(Mn_{1/3}Nb_{2/3})O_3-PbZrO_3-PbTiO_3$ ceramics were investigated with $Al_2O_3$ content $(0.0-1.0 wt\%)$. The constituent phases, microstructure, electromechanical coupling factor, dielectric constant, piezoelectric charge and voltage constants were analyzed. Diffraction peaks for (002) and (200) planes were identified by X-ray diffractometer for all the specimens doped with $Al_2O_3$, indicating the MPB (morphotropic phase boundary) composition of tetragonal structures. The highest sintered density of $7.8 g/cm^3$ was obtained for $0.2wt\%\;Al_2O_3-doped$ specimen. Grain size increased by doping $Al_2O_3$ up to $0.3 wt\%$, and it decreased by more doping. Electromechanical coupling factor, dielectric constant, piezoelectric charge and voltage constants increased by doping $Al_2O_3$ up to $0.2wt\%$, and it decreased by more doping. This might result from the formation of oxygen vacancies due to defects in $O^{2-}$ ion sites and the substitution of $Al^{3+}$ ions.