• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.4 s.48
• /
• pp.515-524
• /
• 2004

Inositol and phytic acid extracted from rice bran were investigated for applying cosmetics. Skin lotions containing $0{\~}3.0\;wt\%$ inositol and $0{\~}1.50\;wt%$ phytic acid were applied respectively, to the arm skins of 45 Asian women 20'~40's for 7 weeks. Improvement on moisture was evaluated. In addition, improvements on sebum, elasticity, and wrinkle were examined after applying placebo, inositol and phytic acid-containing skin lotions tot face, respectively. For $1.0\;wt\%$ inositol, it resulted in $19\%$ increase of moisture. The wrinkle reduction and elasticity improved $12.4%\;and\;17.0\%$ on average, respec-tively. Applying $0.5\;wt\%$ phytic acid resulted in $71.6\%$ increase the moisture. Improvements on wrinkle and elasticity were $16.9%\;and\;21.9\%$ respectivelv. hpplving inositol or phytic acid regardless of dry or oily skin, resulted in sebum value recovery to that of the normal skin after 2~4 weeks. Although inositol is inferior to phytic acid in improvements of the skin, phytic acid is not suitable to sensitive skin. So, $0~0.50\;wt\%$ of phytic acid were added to $1.0\;wt\%$ inositol and similar experiments were carried out. In case of added $1.0\;wt\%$ phytic acid, moisture increased $63.8\%$ approximately. Improvements on elasticity and reduction on wrinkle were $17.2%\;and\;17.4\%,$ respectively. Both skin types were turned to normal skin type after 2 weeks. It could improve the skin condition when used inositol added phytic acid. The optimized concentration of phytic acid was $0.10\;wt\%\;with\;1.0\;wt\%$ of inositol without side effect.

• Korean Journal of Materials Research
• /
• v.15 no.3
• /
• pp.161-165
• /
• 2005

We investigated selective dry etching of GaAs over AlGaAs and InGaP in high density planar inductively coupled $BCl_3/SF_6$ plasmas. The process parameters were ICP source power (0-500 W), RE chuck power (0-30W) and gas composition $(60-100\%\;BCl_3\;in\;BCl_3/SF_6)$. The process results were characterized in terms of etch rate, selectivities of GaAs over AlGaAs and InGaP, surface morphology, surface roughness and residues after etching. $BCl_3/SF_6$ selective etching of GaAs showed quite good results in this study. Selectivities of GaAs $(GaAs:AlGaAs\~36:1,\;GaAs:InGaP\~45:1)$ were superior at $18BCl_3/2SF_6$, 20 W RF chuck power, 300 W ICP source power and 7.5 mTorr. Addition of $(5-15\%)SF_6\;to\;BCl_3$ produced relatively high selectivities of GaAs over AlGaAs and InGaP during etching due to decrease of etch rates of AlGaAs and InGaP (boiling points of etch products: $AlF_3\~1300^{\circ}C,\;InF_3>1200^{\circ}C$ at atmosphere) at the condition. SEM and AFM data showed slightly sloped sidewall and somewhat rough surface$(RMS\~9nm)$. XPS study on the surface of processed GaAs proved a very clean surface after dry etching. It shows that planar inductively coupled $BCl_3/SF_6$ plasmas could be a good candidate for selective dry etching of GaAs over AlGaAs and InGaP.

• Journal of Korean Society on Water Environment
• /
• v.34 no.2
• /
• pp.183-201
• /
• 2018

The tolerance of Korean benthic macroinvertebrates to organic pollution has been analyzed since the early 1990s. However, considering the fact that there have been related studies carried out in some European countries since the early 20th century, the history of the research in Korea is very short and there is still much knowledge to supplement. We revised the saprobic valency, the saprobic value and the indicator weight value of 190 benthic macroinvertebrates taxa through the data of water quality and individual abundance collected from 7,086 sampling units in Korea from 2008 to 2014. The individual abundance of Uracanthella (Ephemeroptera) as a representative, one of the most common and abundant taxa in Korea, showed a typical lognormal distribution to 5-day biochemical oxygen demand (BOD5) concentration, and a normal distribution to the class interval of BOD5 concentration according to saprobic series. The value combining the mean individual abundance and the relative frequency of occurrence was a more efficient indicator value than that of each property alone. Benthic Macroinertebrates Index (BMI) was newly proposed as a modification of the saprobic index of Zelinka and Marvan (1961). BMI showed extremely significant correlation (determination coefficient $r^2$ > 0.6, n = 569 sites) with the concentration of BOD5, and the coefficient was a little higher than those of the previous indices. Until now, there has been very little research on the assessment of biological integrity of benthic macroinvertebrates community in Korea. While continuing researches into improve the reliability of BMI, it is necessary to develop multimetric indices for evaluating the integrity, including the composition of species and functional guilds, and the richness and diversity of the community.

• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.209-218
• /
• 2018

This study was carried out to investigate the occurrence and distribution of ALS inhibiting herbicide-resistant weeds and to estimate the appeared areas of resistant weeds in the paddy fields of Gyeongnam province of Korea in 2017 and 2018 using a soil assay method. Compared with the 2012 survey, this study showed that the infested ratio of ALS inhibiting herbicide-resistant weeds increased from 1.0% to 66.8% and the infested area increased from 876 ha to 49,008 ha. The infested area of ALS inhibiting herbicide-resistant weeds was estimated in Ulsan-si (8.4%), Hapcheon-gun (8.3%), Haman-gun (7.9%), Goseong-gun (7.9%), Hadong-gun (7.3%), Jinju-si (7.2%), Changnyeong-gun (7.0%), Gimhae-si (6.4%), Miryang-si (5.5%), Busan-si (4.9%), Uiryeong-gun (4.6%), Namhae-gun (4.3%), Geochang-gun (4.2%), Changwon-si (3.8%), Geoje-si (2.9%), Yangsan-si (1.8%), Sancheong-gun (0.9%) and Tongyeong-si (0.4%), and the herbicide resistant weeds was not occurred in Hamyang-gun. The most dominant ALS inhibiting herbicide-resistant weeds in paddy fields were Monochoria vaginalis, followed by Echinochloa oryzicola, Lindernia dubia, Scirpus juncoides, Ludwigia prostrata, Cyperus difformis, Sagittaria trifolia and Rotala indica. ALS inhibiting herbicide-resistant M. vaginalis, L. dubia, and E. oryzoides occurred throughout Gyeongnam province, and ALS inhibiting herbicide-resistant S. trifolia and R. indica were only found in Gimhae-si. Therefore, these results will be utilized to estimate population dynamics of ALS inhibiting herbicide-resistant weeds and provide proper management practices in the paddy fields of Gyeongnam province.

• Journal of Korea Water Resources Association
• /
• v.34 no.6
• /
• pp.659-672
• /
• 2001

Generally, design flood for a hydraulic structure is estimated using statistical analysis of runoff data. However, due to the lack of runoff data, it is difficult that the statistical method is applied for estimation of design flood. In this case, the synthetic unit hydrograph method is used generally and the models such as NYMO method, Snyder method, SCS method, and HYMO method have been widely used in Korea. In this study, these methods and KICT method, which is developed in year 2000, are compared and analyzed in 10 study areas. Firstly, peak flow and peak time of representative unit hydrograph and synthetic unit hydrograph in study area are compared, and secondly, the shape of unit hydrograph is compared using a root mean square error(RMSE). In Nakayasu method developed in Japan, synthetic unit hydrograph is very different from peak flow, peak time, and the shape of representative unit hydrograph, and KICT method(2000) is superior to others. Also, KICT method(2000) is superior to others in the aspects of using hydrologic and topographical data. Therefore, Nakayasu method is not a proper in hydrological practice. Moreover, it is considered that KICT model is a better method for the estimation of design flood. However, if other model, i.e. SCS method, Nakayasu method, and HYMO method, is used, parameters or regression equations must be adjusted by analysis of real data in Korea.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.2
• /
• pp.121-128
• /
• 1999

This experiment was carried out to establish effective weed control system in the cultivation of Coix lachryma-jobi L. The effect of annual weeds artificially transplanted on the growth of Coix lachryma-jobi L. were that the higher the density of weeds, the lower the yield considerably by reducing number of grains and tillers per plant. Among four weeds of Echinochloa crusgalli galli P. BEAUV., Digitaria sanguinalis $S_{COPOL}$., Chenopodium album L., and Portulaca oleracea L., weed of Portulaca oleracea L. reduced adlay yield most by 182.6kg/10a and it was judged to be the most injurious weed to adlay production. Among four weed control systems, which are one herbicide treatment, one herbicide treatment + one cultivating work with cultivator, two times cultivating work with cultivator and two times hand-weeding, the control system of 'one herbicide treatment + one cultivating work with cultivator' showed the lowest amount of weed growth by 7.34 weeds per $m^2$ in comparison with control plot of 35.00 weeds per $m^2$. Among four weed control systems, the system of 'two times hand-weeding' had much more amount of light penetration in adlay canopy with 791.9 mol than any other systems.

• Korean Journal of Materials Research
• /
• v.5 no.1
• /
• pp.22-35
• /
• 1995

In this study, crystal structures and magnetic properties of as-ast, annealed and rapidly solidified Mn-A1-M( M=Cu, Fe) alloys have been investigated. In $Mn_{0.56}Al_{0.44}$ alloys, the largest fraction of $\tau$ phase and values of magnetic properties was obtained in Mnl, i6Alo or alloy. And this alloy was used as the basic composition. In $Mn_{0.56-X}M_{X}Al_{0.44}$ alloys, when annealed, $\tau$- and $\beta$-Mn phase appeared at x< 0.08, $\tau$- and $\kappa$ phase at 0.10 $\leq x \leq$ 0.12 and $\kappa$- phase only at 0.15 $\leq x \leq$0.20 . When rapidly solidified, specimens showed similar phases as when annealed except that $\varepsilon$ phase appeared at x=0.04. In Mnu FexAlo 44 alloys, asyast specimens showed $\tau$-, $\beta$-Mn and $\gamma_2$- phase at x<0.08 and K and $\beta$-Mn phase at x>0.10. When rapidly solidified, Mn-Fe-Al specimens showed $\varepsilon$-, $\gamma_2$- and small amount of $\tau$- and $\kappa$ phase at x<0.08 and $\kappa$- phase only at 0.$\leq x \leq$0.20. All the alloys investigated were ferromagnetic. The Curie temperature of annealed specimens and rapidly solidified of Mno 5sAlu 44 alloy were -650K and -644K. Spontaneous magnetization( UII of annealed and rapidly solidified specimens were 40-45 (emu/g) and 50-52(emu/g), respectively. Remanent (M,) to saturation magnetization( Ms) ratio was -0.7. M, of rapidly solidified specimen was about 48(emu/g). Magnetic properties of $Mn_{0.56}Al_{0.44}$ alloys were found to be determined by the relative fraction of ferromagnetic r- and K- phase. When M= Cu and x=0.15, maximum as($\sigma_{0.0}$) was obtained by about 64.3 emu/g), and when M=Fe and x=0.15, 66.4( emu/g). The Curie temperature decreased as x increased.

• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.38-44
• /
• 2004

The iron doped colossal magnetoresistance materials with La-Ba-Mn-O perovskites structure have been synthesized by chemical reaction of sol-gel methods. Their crystallographic and magnetic properties have been studied with x-ray diffraction, VSM, RBS, Mossbauer spectroscopy, and magnetoresistance measurements. The crystal structure of the La$\_$0.67/Ba$\_$0.33/Mn$\_$0.99/Fe$\_$0.01/ $O_3$ at room temperature was determined to be orthorhombic of Pnma. The lattice parameters a$\_$0/ and c$\_$0/ increased gradually, but b$\_$0/ deceased with increase of iron substitution. The magnetization and coercivity deceased, also the Curie temperature decreased from 360 K as x increased from 0.00 to 0.05. Magnetoresistence measurements were carried out, and the maximum MR ($\Delta$$\rho$/$\rho$(0)) was observed at 281 K, about 9.5 % in 10 kOe. The temperature of maximum resistance (R$\_$MAX/) decreased with increasing substitution of Fe ions and a semiconductor-metal transition temperature (T$\_$SC-M/) decreased too. This phenomena show that ferromagnetic transition temperature decreased by substituting Fe for Mn ions, it decreases double exchange interaction. This result accords with magnetic structure of neutron diffraction. Mossbauer spectra of La$\_$0.67/Ba$\_$0.33/Mn$\_$0.99/Fe$\_$0.01/ $O_3$were taken at various temperatures ranging from 15 to 350 K. With lowering temperature of the sample, two magnetic phases were increased and finally it showed the two sharp sextets of spectra at 15 K. The isomer shift at all temperature range is about 0.3 mm/s relative to Fe metal, which means that both Fe ions are Fe$\^$3+/ states.Fe$\^$3+/ states.

• Korean Journal of Microbiology
• /
• v.52 no.4
• /
• pp.406-414
• /
• 2016

Among 6 leu codons, CUG is the most frequently used codon in E. coli. It is recognized by leu-tRNA(CAG) encoded by four genes scattered on two chromosomal loci (leuT and leuPQV ). In the process of constructing a strain with no functional leu-tRNA (CAG) gene on chromosome, we made two mutant strains separately, one on leuPQV locus (${\Delta}leuPQV$), and the other on leuT locus [$leuT^*$(GAG)], where the anticodon of leuT was changed from CAG to GAG, thereby altering its recognition codon from CUG to CUC. We attempted to combine these two mutations by transduction using $leuT^*$(GAG) strain as a donor and ${\Delta}leuPQV$ strain as a recipient. Large and small colonies appeared from this transduction. From PCR and DNA sequencing, large colony was confirmed to be the reciprocal recombinant as expected, but the small colonies contained both mutant $leuT^*$(GAG) and wild type leuT (CAG) genes in the cell. This heterozygous diploid strain did not show any unusual morphology under microscopic observation, but, interestingly, it showed a linear growth curve in rich medium with much slower growth rate than wild type cell. It always formed homogenous small colonies in the selection medium, but, when there was no selection, it readily segregated into $leuT^*$(GAG) and leuT (CAG). From these observations, we suggested that the strain with both $leuT^*$(GAG) and leuT (CAG) genes was not a partial diploid (merodiploid), but a full diploid cell having two different chromosomes. We proposed a model explaining how such a heterozygous diploid cell was formed and how and why its growth showed a linear growth curve.

• Journal of The Korean Association For Science Education
• /
• v.24 no.3
• /
• pp.532-543
• /
• 2004

The teacher appointment examination is consisted of a written test, an interview, a demonstration of teaching practices, one's academic record etc. The primary written test(full credit of 100) consists of multiple-choice test of general pedagogy(30%) and constructed response test of science(70%). The science test consists of science education($20{\sim}30%$) and science content($70{\sim}80%$). Five science exams were implemented for appointing general science, physics, chemistry, biology and earth science teachers in 2002 and 2003. The credits alloted to science education domain decreased from $25.7{\sim}30%$ in 2002 to $24.3{\sim}25.7%$ in 2003. The percentage of correct answer was similar between science education and science content domain in 2002, but the percentage of correct answer in science education domain(70.2%) was 29.8% higher than that of science content domain in 2003. Earth science exam almost reached the target mean score of 60 but the other four exams showed the mean scores ranging from 45.0 to 52.7 in 2002 and from 40.1 to 49.6 in 2003. The percentage of high difficulty items(p<40%) was 41.2% in physics and chemistry in 2002, 50% in physics and chemistry, and 45% in biology in 2003. Seventy eight percent of the items showed fairly high discrimination index(r>.30). In addition, the reliabilities of 5 tests were from .79 to .88. In conclusion, it is recommended that the credits alloted to science education domain should be increased up to 30%, and exam difficulties should be lowered to a proper level by making science content items easier.