• Proceedings of the Korean Ceranic Society Conference
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.158.2-158
• /
• 2000

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1096-1099
• /
• 2004

The principal problems in development of dielectric paste materials for PDP(plasma display panel)are PbO free paste and low melting temperature. We prepared PbO free paste from glasses in the system BaO-ZnO-$B_2O_3$-$V_2O_5$. DTA, and XRD were used to characterize BaO-ZnO-$B_2O_3$-$V_2O_5$ glasses. In this present study, PbO free paste had thermal expansion of $74\times10^{-7}/^{\circ}C$, DTA softening point of $460^{\circ}C$, and firing condition of $520^{\circ}C$, 20min

• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.266-271
• /
• 2021

A commercial PbO₂ electrode was adopted as the anode for the electrochemical degradation of the real textile effluent with the initial COD of 56.0 mg L^-1 and the stainless steel plate as the cathode. The effect of the initial pH, the electrolyte flow rate and the cell voltage on the COD, the current efficiency and the energy consumption were investigated without the addition of NaCl or Na₂SO₄. The experimental results illustrated that the PbO₂ electrode can reduce the COD of the textile effluent from 56.0 mg L^-1 to 26.0 mg L^-1 with the current efficiency of 86.1% and the energy consumption of 17.5 kWh kg^-1 (per kilogram of degraded COD) under the optimal operating conditions. Therefore PbO₂ electrode as the anode was promising to further electrochemically degrade the real textile effluent.

• Journal of the Korean Ceramic Society
• /
• 제32권11호
• /
• pp.1269-1275
• /
• 1995

Effects of GeO2 addition on the thermal and structural stabilities of PbO-Bi2O3-Ga2O3 glasses were studied. Thermal stabilities, as assessed by the weighted thermal stability factors [(Tx-Tg)/Tg], increased with GeO2 concentraton from 0.097 to 0.210 with the addition of 20 mol% GeO2. Increasing GeO2 content resulted in the decrease of apparent density, molar volume, refractive index and thermal expansion. On the other hand, IR transmission cut-off (λT=50%) moved from 6.73${\mu}{\textrm}{m}$ for the ternary PbO-Bi2O3-Ga2O3 glass to shorter wavelength side, 5.98${\mu}{\textrm}{m}$ for a glass containing 20mol% GeO2. There were little change with GeO2 content, however, in the activation energies for the viscous flow of approximately 140 kcal/mole within the temperature interval of 300~50$0^{\circ}C$. Addition of GeO2 to PbO-Bi2O3-Ga2O3 glasses enhanced the thermal and structural stabilities significantly at the expense of their infrared transmittance. An appropriate compsomise between these two opposite trends should be made following the specifications of the final applications.

• Korean Journal of Crystallography
• /
• 제16권2호
• /
• pp.128-137
• /
• 2005

We report on the phase transitions of the perovskite nanostructures made by sol-gel template synthesis. The lead titanate ($PbTiO_{3}$) nanostructures were prepared with a chelate sol-gel of titanium tetrabutoxide ($Ti(O^{i}Pr){4}$) and lead acetate ($Pb(OAc)_{2}-3H_{2}O$). $Whatman^{\circledr}$ anodisc membranes (with about 200 nm pore size) served as the template. The template was dipped into the sol, allowed to air dry, and then calcined at $650^{\circ}C$. We have characterized the temperatures of the phase transitions in the $PbTiO_{3}$ nano-structures using DSC, DTA, and second harmonic generation (SHG).

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.245-245
• /
• 2011

$BiFeO_3$ (BFO)박막에 전위금속 Pb와 Co를 각각 치환환 박막을 chemical solution deposition 방법으로 Pt/Ti/SiO2/Si(100) 기판위에 증착하였다. Bi 자리에 Pb와 Co를 20 at.% 치환하였으며, 치환된 $Bi_{0.8}Pb_{0.2}FeO_3$ (BPFO), $Bi_{0.8}Co_{0.2}FeO_3$ (BCFO) 박막의 구조적, 자기적 특성 변화를 BFO 박막과 비교하여 조사하였다. XRD 패턴을 분석한 결과 BPFO, BCFO 박막들은 모두 rhombohedrally distorted perovskite 구조였으며 불순물인 pyrochlore 상이 약하게 관측되었다. 치환이 이루어진 BPFO, BCFO 박막들의 자기 이력곡선은 안정된 포화곡선을 나타냈으며 BFO의 포화값(5 emu/$cm^3$)에 비해 크게 증가된 55 emu/$cm^3$, 35 emu/$cm^3$의 값을 나타냈다. 또한 보자력장(coercive field, Hc)값도 BFO의 500 Oe보다 크게 증가된 1,200 Oe, 800 Oe의 값을 보였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.206-207
• /
• 2005

Display 소재로서 유전체나 격벽재 실링재로 사용되고 있는 frit는 PbO를 주성분으로 갖는 유리가 사용되고 있다. PbO 성분이 함유된(50$\sim$85%) 구성소재는 최근 RoHS 나 WEEE 등의 환경규제 실행에 직면해 있으며, 대체재료의 개발을 위한 많은 연구가 진행되고 있다 PbO 성분을 대체할 성분으로는 $Bi_2O_3$ 계, BaO-ZnO 계, $P_2O_5$ 계 등의 성분이 주요성분으로 이루어져 있으며, PbO 성분을 함유한 유리의 저융점, 저유전율, 고 투과율, 내산성, 내전압, 팽창계수 matching 등의 특성들에 부합되는 재료를 개발하기 위해 많은 노력을 기울이고 있다. 본 연구에서는 SnO-$P_2O_5$ 계 유리 조성을 선택하여 $R_2O_3$의 치환 및 용융분위기의 조절에 따른 저융점 유리로서의 특성과 효과에 대하여 고찰하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제6권6호
• /
• pp.457-460
• /
• 2005

Nano-sized titanium oxide and zirconium oxide powders were synthesized by hydrolysis of titanium isopropoxide $[Ti(OC_3H7)_4]$ and zirconium tetrachloride ($ZrC1_4$) via a sol-gel technique. Lead titanate powders were prepared by mixing $TiO_2$ precursors with PbO slurry made with dilute $NH_4OH$. Lead zirconate titanate powders were, then, synthesized by mixing $PbTiO_3$ with $ZrO_2$ powders. The goal of this research was to obtain the $PbZrTiO_3(PZT)$ powders and sintering these powders at low temperature. The $PbTiO_3$ and PZT powders after firing were analyzed by X-ray diffraction(XRD) and transmission electron microscopy(TEM) was utilized to observe the shape and size of the synthesized nano-particles. In the XRD pattern, the well-crystallized PZT phase could be obtained in consequence of firing at $900^{\circ}C$. SEM micrographs also showed that grains of PZT were relatively well grown with the size of the range of $2{\~}4{\mu}m$. The densified perovskite structure of $PbZrTiO_3$ could be obtained by sintering at temperature as low as $900^{\circ}C$. Characterization of the samples showed improved piezoelectric properties.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 한국재료학회 2001년도 추계 학술발표강연 및 논문개요집
• /
• pp.187-187
• /
• 2001

• Korean Journal of Materials Research
• /
• 제12권5호
• /
• pp.347-352
• /
• 2002

A transparent dielectric of the $PbO-B_2O_3-SiO_2-A1_2O_3$ system which was a low melting glass has been used for PDP (Plasma Display Panel), but it has a problem which is a reaction to be occurred between a transparent dielectric layer and electrodes (Ag, ITO) after firing. This research was conducted for ion migration of $Ag^+\$ and $Sn^ {2+}$ during firing three different frits of low melting glass. The result showed that yellowing phenomena occurred through a chemical reaction between $Ag^+\$and $Sn^ {2+}$ at 550~58$0^{\circ}C$ for 20~60 min. In addition, it was confirmed that the migration of $Sn^{2+}$ from ITO electrode made a strong effect on the yellowing phenomena.