• 제목/요약/키워드: $PbI_2$

검색결과 522건 처리시간 0.034초

토양시료의 분쇄가 왕수분해법을 이용한 비소와 납의 전함량 분석 결과에 미치는 영향 (Effect of Soil Grinding on Total Concentrations of As and Pb in Soil Determined by aqua regia Method)

  • 안진성;유기현;남경필
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제23권1호
    • /
    • pp.25-29
    • /
    • 2018
  • The effect of soil grinding on total As and Pb concentrations determined by aqua regia method was examined. Among six field-collected, air-dried soil samples tested, soils A, B, C, and E were directly sieved through a $150-{\mu}m$ sieve without grinding and showed 2.18 to 3.03 times higher total As concentrations and 2.62 to 3.45 times higher total Pb concentrations than those of the soil samples prepared to allow all soil particles to pass through the $150-{\mu}m$ sieve by grinding. The reason can be ascribed to the fact that those soils contain fine particles (i.e., < $150{\mu}m$ in diameter) only 4.6 to 6.8% of the total soil weights. On the other hand, for D and F soils, fine particles smaller than $150{\mu}m$ accounted for 57 and 46%, respectively, so that the effect of grinding on As and Pb concentrations were relatively low (As: 1.15 and 1.23 times, Pb: 1.36 and 1.49 times, respectively). The result demonstrates that grinding prior to $150-{\mu}m$ sieving is necessary to ensure the homogeneity of soil samples and hence to obtain more accurate heavy metal concentrations in soils. This is especially true for soil samples with less fine soil particles and/or microaggregates (i.e., below $150{\mu}m$).

이산화납/탄소 반죽 전극을 이용한 과당 농도 측정 스트립센서 (A Strip Sensor Based on PbO2/Carbon Paste Electrode to Determine Sweetener Contents in Fruits)

  • 이재선;조주영;허민;임우진;이상은;남학현;차근식;신재호
    • 전기화학회지
    • /
    • 제17권2호
    • /
    • pp.130-137
    • /
    • 2014
  • 본 연구에서는 스크린 프린팅 방법을 이용하여 이산화납($PbO_2$)/탄소 반죽 전극을 제작하고, 이를 전기화학 방법의 과일 천연당(포도당, 자당, 과당) 측정용 센서로 이용하였다. 이산화납/탄소 반죽전극은 탄수화물과 같은 유기화합물의 전기화학적 산화촉매 신호를 측정함으로써 효소를 사용하지 않고도 당의 측정이 가능하다. 또한 측정 시 심각한 방해작용을 하는 아스코르브산(ascorbic acid)은 Nafion 막을 전극표면에 도입함으로써 효과적으로 감소시켰다. 최적화된 Nafion/이산화납/탄소 반죽 전극은 사람이 느끼는 상대당도(과당>자당>포도당)와 유사하게 각 당에 대한 감응신호를 나타내었다.

한방생약제품의 제제 유형에 따른 중금속 함량 연구(I)

  • 안국원;정대화;황현욱;오성윤;박문기
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 2007년도 춘계 학술발표회 발표논문집
    • /
    • pp.574-576
    • /
    • 2007
  • 환으로 제조된 생약제제 3개 제품의 중금속의 농도는 허용치보다 낮게 검출이 되었으며, 사칠탕의 경우 As농도는 0.837ppm, Cd의 농도는 0.01ppm, Pb의 농도는 0.552ppm, Hg의 농도는 0.005ppm으로 측정되었고, 안중조기환읜 경우 As의 농도는 0.247ppm, Cd의 농도는 0.1375ppm, Pb의 농도는 2.552ppm, Hg의 농도는 0.01ppm으로 측정이 되었으며, 청상보화환의 경우 As의 농도는 0.295ppm, Cd의 농도는 0.0875ppm, Pb의 농도는 1.735ppm, Hg의 농도는 0.009ppm으로 측정되었다. 환으로 제조된 생약제제의 경우 대부분 Pb의 농도가 비교적 높게 검출이 된 결과를 보이고 있다.

  • PDF

연화광산(蓮花鑛山)의 지질광상(地質鑛床) (Geology and Ore Deposits of Yeonhwa Mine)

  • 한갑수
    • 자원환경지질
    • /
    • 제2권3호
    • /
    • pp.47-57
    • /
    • 1969
  • The Yeonhwa Lead and Zinc Mine is located in northern part of Kyeongsang-Buk-Do, Korea, and is economically most important mine because it produces most part of the output of lead and zinc minerals in the country. Ore deposits of the mine are localized in the Pungchon Formation and several limestone seams of upper Myobong Formation in Cambrian Age. Ore solution ascended along the fractures of N-S, NE-SW or NW-SE trends and along slate and limestone boundary, and then replaced selectively limestone to make ore bodies. Skarn minerals are consisted of hedenbergite, diopside, and main sulfide mineral orebodies are composed of galena, zincblende, pyrrhotite, pyrite and a minor amounts of arsenopyrite and chalcopyrite. Metal ratio, ${\rho}_{Pb}={\frac{Pb(%)}{Pb(%)+Zn(%)}}{\times}100$, illustrates the zona I arrangements of some ore bodies. It will be inferred the flow trending of ore solution and the process reaction with adjacent country rocks. The sub-divided formations of the Pungchon limestone and Myobong slate are very useful as a criteria for detecting probable ore location. Rhodochrosite veins are good evidence for searching of ore location, especially on Pb-rich ore bodies.

  • PDF

정상인 및 각종 갑상선 질환 환자의 혈청 Thyroxine (Determination of Serum Thyroxine Levels in Normal Korean Subjects and Various Thyroid Diseases)

  • 김동집;민병석;박용휘;김부성
    • 대한핵의학회지
    • /
    • 제3권2호
    • /
    • pp.33-38
    • /
    • 1969
  • The serum thyroxine levels were measured by method of Tetrasorb Kit in 69 subjects including 13 subjects in euthyroid state, 31 with hyperthyroidism, 5 with hypothyroidism, 13 with nontoxic diffuse goiter, and 7 with nontoxic nodular goiter. Three parameters of the thyroid function test including thyroxine ($T_4$) levels, $^{131}I$ uptake (24 hrs) values and $PB^{131}I$ conversion ratio were correlated with clinical manifestations and courses of the disease. 1. The serum $T_4$ levels in the normal subjects were in range of $6.0{\mu}g/dl\;to\;14.4{\mu}g/dl$. (The mean $9.4{\mu}g/dl$). 2. The diagnostic compatibility of the serum $T_4$ was 93.5% in hyperthyroidism, 100% both in hypothyroidism and in nontoxic diffuse goiter, 86% in nontoxic nodular goiter, or 95.8% in the entire series. (Table 1). 3. The diagnostic compatibility of $^{131}I$ uptake (24 hrs) values and $PB^{131}I$ conversion ratio were less than the serum $T_4$ levels as summarized in Tables 2 & 3. The serum $T_4$ determination by Tetrasorb Kit is a simple, accurate and very useful test of the thyroid function.

  • PDF

Fabrication and characterization of PbIn-Au-PbIn superconducting junctions

  • Kim, Nam-Hee;Kim, Bum-Kyu;Kim, Hong-Seok;Doh, Yong-Joo
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제18권4호
    • /
    • pp.5-8
    • /
    • 2016
  • We report on the fabrication and measurement results of the electrical transport properties of superconductor-normal metal-superconductor (SNS) weak links, made of PbIn superconductor and Au metal. The maximum supercurrent reaches up to ${\sim}6{\mu}A$ at T = 2.3 K and the supercurrent persists even at T = 4.7 K. Magnetic field dependence of the critical current is consistent with a theoretical fit using the narrow junction model. The superconducting quantum interference device (SQUID) was also fabricated using two PbIn-Au-PbIn junctions connected in parallel. Under perpendicular magnetic field, we clearly observed periodic oscillations of dV/dI with a period of magnetic flux quantum threading into the supercurrent loop of the SQUID. Our fabrication methods would provide an easy and simple way to explore the superconducting proximity effects without ultra-low-temperature cryostats.

토끼의 난포발육 처리 후 난포란 체외 성숙 시 핵의 발달과정 (Nuclear Progression through In Vitro Maturation of Follicular Oocytes in Superovulatory Treated Rabbits)

  • 박충생;이경미;전병균;강태영;이효종;최상용
    • 한국수정란이식학회지
    • /
    • 제10권1호
    • /
    • pp.45-51
    • /
    • 1995
  • In order to determine the optimum condition and timing for in vitro maturation of oocytes to metaphase of meiosis II (M II), the immatured follicular oocytes were recovered by puncturing the large(1.0~1.5 mm in diameter) and small(<1.0 mm in diameter) follicles in the ovaries of rabbits treated intramuscularly with a single dose of 100 TU PMSG 68 hours previously. The follicular oocytes were classified into three grades by the attachment of cumulus cells. The Grade I and II follicular oocytes from large follicles were cultured in BO-DM medium with 10% FCS, 35 $\mu$g /nl of FSH, 10 $\mu$g /ml of LH and 1 $\mu$g /ml of estradiol-17$\beta$ at 39t in a 5% $CO_2$ incubator for 11 to 23 hours. In 3 hours interval during the culture period, the oocytes were harvested and their cumulus cells were removed with hyaluronidase. The denuded oocytes were stained with Hoechst 33342 dye and their meiotic status and extrusion of the first polar body (PB) were examined under a fluorescence microscope. Also the fragmentation of the first PB and the distance between the first PB and nucleus were examined. The results obtained were as follows: 1. The mean recovery rate of follicular oocytes from the large and small follicles was 59. 9 and 31.3%, respectively. The mean number of oocytes recovered per rabbit and the Grade I percentage were 14.6 and 94.4% in large follicles, but 2.1 and 61.1% in small follicles, respectively. All the parameters examined were different significantly (p<0.05) between both the folliclular size. 2. Most of the follicular oocytes(86.8%) were matured in vitro to M II phase in 14 hours in Grade I oocytes, but the significantly(p<0.05) less oocytes(45.5%) were matured in Grade II oocytes. 3. The first PB was extruded in most of the oocytes(94.7%) in 14 hours of culture with the fragmentation rate of 29.6%, but the fragmentation rate of the first PB increased significantly (p<0.05) as the culture period for maturation was longer to 20 hours(63.5%). 4. The distance between the first PB and nucleus was increased linearly (p<0.05) as the maturation time passed from 14(7.1$\mu$rn) to 23 hours(58.4$\mu$m). 5. From the above results it was concluded that the optimum time for in vitro maturation culture might be 14 hours in the follicular oocytes from rabbit primed with PMSG for 68 hours, expecially when these follicular oocytes were used for recipient cytoplasms in embryo cloning.

  • PDF

Microstructure and Electrical Properties of Pb[(Mg,Mn)Nb]O3-Pb(Zr,Ti)O3 Piezoelectric Ceramics

  • Kim, Jin-Ho;Kim, Jong-Hwa;Baik, Seung-Woo
    • Transactions on Electrical and Electronic Materials
    • /
    • 제6권5호
    • /
    • pp.202-209
    • /
    • 2005
  • Phase evolution, microstructure and the electrical properties such as $k_p$ and $Q_m$ of $Pb(Mg_{1/3}Nb_{2/3})O_3[PMN]-Pb(Mn_{1/3}Nb_{2/3})O3[PM'N]-PbZrO_3[PZ]-PbTiO_3[PT]$ quaternary system were investigated within the compositional ranges $0{\leq}y{\leq}0.125$, y+z=0.125, and $0.39{\leq}x{\leq}0.54$ of the formula $Pb_{0.97}Sr_{0.03}[Mg_{1/3}Nb_{2/3})_y\;(Mn_{1/3}Nb_{2/3})_z\;(Zr_{x}Ti_{1-x})_{1-(y+z)}]O_3$. In the case of increasing Mn/(Mg+Mn) ratio for a fixed Zr/Ti ratio of 47.5/52.5, phase relation remained unchanged but the grain size drastically decreased, and the electrical properties changed as following: both $k_P$ and $Q_m$ reached the peak values at $Mn/(Mg+Mn)\cong0.3l7$ and gradually decreased; $\varepsilon33^T$ showed a monotonic decrease; P-E hysteresis loop gradually changed to asymmetrical one, and $E_i$ increased in correspondence. With increasing Zr/Ti ratio for a fixed Mn/(Mg+Mn) ratio of 0.317, on the contrary, the cell parameter $(\alpha^2c)^{1/3}$ gradually increased, and tetragonal-rhombohedral morphotropic phase boundary appeared in the range of $51/49{\leq}Zr/Ti{\leq}54/46$. the meantime, the grain size substantially increased, and the electrical properties changed as following: $k_P$ and $\varepsilon33^T$ reached peak values at Zr/Ti=51/49 and 48/52, respectively, and then gradually decreased; change of $Q_m$ was adverse to $k_P$; both $E_C\;and\;E_i$ considerably decreased while $P_S$ moderately increased. For the system 0.125(PMN+PM'N)-0.875PZT studied, the composition Mn/(Mg+Mn)=0.3l7 and Zr/Ti=51/49 revealed some promising electrical properties for piezoelectric transformer application such as $k_P=0.58,\;Q_m\cong1000$, and $\varepsilon^T_{33}=970$, as well as dense and fine-grained microstructure.

양이온교환수지에 의한 비스무트 지금 및 합금의 분리 정량 (The analysis of Bismuth metal and its alloy by using of cation exchanger)

  • 박면용;이병조;박기채
    • 대한화학회지
    • /
    • 제15권2호
    • /
    • pp.49-54
    • /
    • 1971
  • It is shown that the impurities of Cu(II), Pb(II), Zn(II) and Ag(I) in Bismuth metal and the components of Pb(II), Zn(II) and Sn(IV) in Bismuth alloy are separated into their components from each other by elutions through $3.14cm^2{\times}10cm$ cation exchange resin, $Dowex\;50w\;{\times}\;8$ (100~200 mesh), column with the mixed solutions of HAc and NaAc as the eluents. The elution curve of Fe(III) has a long tailing and is not separated quantitatively from Bi(III). The eluents used for this separation are as follows; 1M HAc + 0.1M NaAc (pH 3.36) for Fe(III) and Bi (III). 0.3M HAc + 0.3M NaAc (pH 4.70) for Cu(II), Pb(II) and Zn(II). 0.5M HAc + 0.5M NaAc (pH4.70) for Ag(I) and Sn(IV). The analysis of cations eluted are carried out by spectrophotometry and EDTA titrimetry. Their recoveries are more than 99%.

  • PDF

태양전지 Ribbon 두께와 조성에 따른 Ribbon접합부의 장기 신뢰성 특성에 관한 연구 (The Study on the Long-term Reliability Characteristics of Ribbon Joint: Solar Cell Ribbon Thickness and Solder Compositions)

  • 전유재;강민수;소경준;이재준;신영의
    • 에너지공학
    • /
    • 제23권4호
    • /
    • pp.88-94
    • /
    • 2014
  • 본 논문에서는 실리콘 태양전지의 Ribbon 접합부에 대한 장기 신뢰성 평가를 위해 Ribbon 두께와 솔더 조성을 달리하여 (A-type:0.2mm/SnPb, B-type:0.25mm/SnPb, C-type:0.2/SnA gPb, D-type:0.25mm/SnAgPb) 열충격 시험을 수행하였다. 열충격 시험 조건은 $-40^{\circ}C$에서 $85^{\circ}C$로 각각 15분씩 30분을 1 cycle로 하여 600 cycle을 수행하였다. 그 결과 초기효율은 A-type이 15.0%, B-type이 15.4% 및 C, D-type이 15.8%를 나타냈으며, 열충격 시험 후 초기효율 대비 효율감소율은 A-Type이 13.8%, B- Type이 15.4%, C-Type이 15.3% 및 D-Type이 16.2%을 나타냈다. I-V 특성곡선 및 표면변화를 비교한 결과, 표면의 변화는 큰 차이가 없었으나, A, C-Type의 시편에서는 직렬저항이 증가하였고, C-Type의 I-V 특성곡선 Current 저하 시작점이 A-Type보다 0.05(V)빠르게 나타났다. B, D-Type에서는 직렬저항 증가 및 병렬저항 감소의 복합적인 효율 저하 특성이 나타났으며, Cell 손상도 확인할 수 있었다. SnAgPb계열 솔더를 사용한 시편이 초기 접합성 및 효율 측면에서 우수하였으나, 장기신뢰성에서 취약하였으며, Ribbon 두께가 두꺼울수록 장기신뢰성이 저하되는 것을 확인 할 수 있었다.