• 한국결정성장학회지
• /
• 제5권2호
• /
• pp.152-164
• /
• 1995

NaCl과 KCl을 1 : 1 mole비로 한 용융염 합성법으로 $xPb(Fe_{1/2}Nb_{1/2})O_3 - (1 - x)Pb(Mg_{1/3}Nb_{2/3})O_3$(x=0-1.0)을 제조하였으며, 이의 분말 특성 및 유전성을 연구하였다. 용융염 합성법에 의해 제조된 $xPb(Fe_{1/2}Nb_{1/2})O_3 - (1 - x)Pb(Mg_{1/3}Nb_{2/3})O_3$의 분말은 $2 \mu\textrm{m}$ 이하의 평균입도를 갖고 비교적 응집이 적었다. 용융법 합성법으로 제조된 $x0.3Pb(Fe_{1/2}Nb_{1/2})O_3-0.7Pb(Mg_{1/3}Nb_{2/3})O_3$ 세라믹스는 $1000{\times}C$에서 제조가 가능하며, 11,000이상의 유전상수를 갖는다.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.667-672
• /
• 1998

Columbite precursor 방법을 이용하여 제조한 Pb(Mg1/3Nb2/3)O3-PbTiO3 세라믹계의 초전특성을 $1000^{\circ}C$에서 $1250^{\circ}C$의 소결온도 범위에서 관찰하였다. Pb(Mg1/3Nb2/3)O3-PbTiO3 계는 전형적인 완화형 강유전특성을 나타내었다. $1250^{\circ}C$에서 2시간 소결한 $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3$ 세라믹의 경우, 높은 소결밀도와 향상된 초전특성을 얻을수 있었다. $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3$세라믹은 항온장치를 이용할 경우 초전 센서로의 응용가능성을 나타내었다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.66.2-66
• /
• 2000

• 한국세라믹학회지
• /
• 제30권9호
• /
• pp.723-730
• /
• 1993

The mechanism of formation of perovskite phase and the dielectric properties of PZMN[Pb(Zn, Mg)1/3Nb2/3O3] ceramics were examined using two different types of the columbite precursors, (Mg, Zn)Nb2O6 (MZN) and MgNb2O6＋ZnNb2O6 (MN＋ZN). The formatin of perovskite phase in PbO＋MN＋ZN system is characterized by an initial rapid formation of Mg-rich perovskite phase, followed by a sluggish formation of Zn-rich perovskite phase. On the other hand, thepyrochlore/perovskite transformation in the PbO＋MZN system proceeded uniformly with a spatial homogeneity. The degree of diffuseness of the rhombohedral/cubic phase transitionis higher in the PbO＋MN＋ZN system than in the PbO＋MZN specimen, indicating a broadened compositional distributjion of the B-site catons (Nb+5, Zn+2, Mg+2) in the PbO＋MN＋ZN system.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 제11차 KACG 학술발표회 Crystalline Particle Symposium (CPS)
• /
• pp.185-217
• /
• 1996

Pb(Mg1/3Nb2/3)O3은 높은 유전율과 전기저항 및 유전율의 온도변화율이 적은 Pb계 relaxor의 대표적인 재료로서 적층 세라믹 콘덴서 재료에의 응용이 크게 기대되고 있다. 그러나 산화물 분말을 이용하는 일반적인 세라믹스 합성방법으로는 Pb(Mg1/3Nb2/3)O3의 단일상의 합성이 어렵고, 합성과정에서 저유전율상인 pyrochlore상이 합성이 어렵고, 합성과정에서 저유전율상인 pyrochlore상이 공존하여 Pb(Mg1/3Nb2/3)O3의 전기적 특성을 저하시킨다. 본연구에서는 용액을 이용하여 Pb(Mg1/3Nb2/3)O3의 단일상을 합성하고자 하였다. 출발물질로는 값싼 금속염인 Niobium Oxalate, magnesium Nitrate 및 Lead Nitrate를 선정하고 증류수에 용해하여 혼합용액을 제좋고, 합성방법으로는 초음파 분무 열분해법과 에멀젼법을 이용하였다. 초음파 분무 열분해법에서는 75$0^{\circ}C$에서 합성한 분말을 다시 75$0^{\circ}C$에서 하소하여 Pb(Mg1/3Nb2/3)O3 단일상을 합성할 수 있었으며, 에멀젼법에서는 80$0^{\circ}C$에서 Pb(Mg1/3Nb2/3)O3 단일상을 합성할 수 있었다.

• 한국세라믹학회지
• /
• 제35권2호
• /
• pp.123-128
• /
• 1998

Multilayer ceramic capacitors(MLCC) were prepared by laminating the layer of composition with dif-ferent Curie temperature to improve temperature coefficient in the Pb(Mg1/3Nb2/3)O3-PbTiO3 binary system. Green sheet was formed by tape casting using Pb(Mg1/3Nb2/3)O3-PbTiO3 and PbTiO3 synthesized with solid state reaction of PBO. Nb2O5 MgO and TiO2. Green sheet with electrode of 70Ag-30Pd was laminated under 300 kg/cm2 at 70$^{\circ}C$ and sintered at 1100$^{\circ}C$ for 2hr. Curie temperatues for MLCC with 10 layers of pure PMN and 0.9PMN-0.1PT were lowered to -22$^{\circ}C$ and 36$^{\circ}C$ respectively. MLCC with 7 layers of PMN and 3 layers of 0.9PMN-0.1PT showed nearly zero temperature coefficient of capacitance in the range of -20∼30$^{\circ}C$ and sum of dissipation factor of each layer.

• 한국세라믹학회지
• /
• 제33권1호
• /
• pp.17-24
• /
• 1996

Pb(Mg1/3Nb2/3)O3 powder with high purity chemical homogeniety and reactivity was prepared by solvent eva-poration of common solution. The common solution was fabricated using a Pb(NO3)2 Mg(NO)3 and NB solution which was prepared by dissolving NbC in H2O2 acquous solution. In precusor powder prepared by solvent evaporation method the synthetic temperature of Pb(Mg1/3 Nb2/3)O3 phase was lowered. And the formation of homogeneous Pb(Mg1/3Nb2/3)O3 phase was enhanced but the formation of pyrochlore phase was reduced. The dielectric constant of PMN ceramics from the synthesized powder was found to increase with both sintering temperature and excess MgO and subsequent analysis of the microstructures confirmed that this was due to an increase in grain size. The grain size dependence is explained as a consequence of low-permittivity grain boundaries.

• 한국세라믹학회지
• /
• 제33권11호
• /
• pp.1267-1275
• /
• 1996

Green sheet was prepared by tape casting in the composition of (1-x)Pb(Mg1/3Nb2/3)O3-PbTiO3 system using Pb(Mg1/3Nb2/3)O3 and PbTiO3 synthesized with PbO, Nb2O5 MgO and TiO2 The densest green sheet was obtained in the weight ratio 70:30 of powder to binder. Green sheet wasmultilayered in metal mould and formed into lamination at 7$0^{\circ}C$, 300kg/cm2 The lamination was sintered at 110$0^{\circ}C$ 2hr, Dielectric constant and Curie temperature of disc type sintered body was highered with increasing the amount of PbTiO3 and was in the range of 19000-21000, -7~45$^{\circ}C$ respectively. Green and sintered relative density of lamination was 61% and 95% respectively.

• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1443-1448
• /
• 1994

Pb(Mg1/3Nb2/3)O3-PbTiO3-BaTiO3 solid solution was formed by mixed-oxide method. The phase during formation was analysed by XRD and formation mechanism was investigated. While heat-treating Pb(Mg1/3Nb2/3)O3 composition, the first, Pb2Nb2O7 and Pb3Nb2O8 pyrochlore phases are formed, and finally Pb(Mg1/3Nb2/3)O3 perovskite phase with containing Pb3Nb4O13 pyrochlore phase is obtained at 80$0^{\circ}C$. When Pb(Mg1/3Nb2/3)O3 composition is modified with PbTiO3 which have strong ionic bonding and high tolerance factor, the amount of pyrochlore phase is decreased by increasing of stability in perovskite structure.

• 한국세라믹학회지
• /
• 제33권10호
• /
• pp.1117-1123
• /
• 1996