• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.4
• /
• pp.2259-2263
• /
• 2016

Background: Mammographic density determined according paranchymal patterns is a risk factor for breast cancer and its relationships with body and other breast characteristics of women is important. The purpose of the present study was to correlate breast parenchymal patterns and mammography abnormality findings with women's BMI, compressed breast thickness (CBT) and age in Tabriz city, Iran. Materials and Methods: From 1,100 mammograms interpreted by radiologists, breast parenchymal was classified into four categories from Types 1 (mostly fatty) through 4 (mostly fibroglandular tissue). Age, BMI, and CBT were recorded and their relation with risk for the development of breast abnormalities in mammograms was analyzed. Results: In women with a mean age of $45.8{\pm}8.63years$ 17.7% were in the high density group (Type 3 and 4). A comparison of four types of breast paranchymal with BMI, CBT and age showed inverse relations to breast density. Abnormal mammographic findings were 25.8% of all reported mammograms with a circular mass (12.7%) as the most common abnormality. About 21% abnormal cases were in less than 40 years. Increasing of BMI had significant relation with breast abnormality but in CBT was not observed. Conclusions: Measurement of women's body characteristics is useful for assistance in mammography diagnosis as well as selection of imaging instrument by high sensitivity for following patient in future. The effects of age, CBT and BMI groups on the breast paranchymal were significant.

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.269-276
• /
• 2014

A short study for the uncertainty of post column isotope dilution method has been performed for the analysis of Selenomethionine in HPLC-ICP/MS. Major error sources studied were concentration and the flow rate of Se isotope solution, atomic weights of Se in spike and sample, and isotope ratio measured for the spiked sample. Uncertainties were obtained for each factor and the contribution for the total concentration uncertainty was 54.4% and 0.61%, 0.0072% and 0.018%, and 45.0%, respectively. The biggest contribution factor was concentration of the spike solution and the second was the isotopic ratio measured for the spiked sample solution. The mass flow rate of spike and atomic weights did not show much contribution. The calculated total uncertainty was $1.46ng{\cdot}g^{-1}$ for the standard SeMet ($126.30ng{\cdot}g^{-1}$). The experimental result was $127.09{\pm}1.46ng{\cdot}g^{-1}$ and the relative uncertainty was 1.20%.

• Clinical and Experimental Pediatrics
• /
• v.60 no.11
• /
• pp.359-364
• /
• 2017

Purpose: The risk of cardiovascular disease (CVD) has been shown to be associated with systemic inflammation in obese adults with metabolic syndrome (MetS). The aims of this study were to evaluate the prevalence of MetS and its relation to inflammatory markers in obese Thai children. Methods: A cross-sectional study was conducted. Children with history of endogenous obesity, chronic diseases, drug ingestion, and any acute illness within 2 weeks prior to enrollment were excluded. Their fasting blood glucose (FBG) levels, oral glucose tolerance tests, insulin, lipid profiles, and selected inflammatory markers, including interleukin-6, tumor necrosis factor-alpha, and high-sensitivity C-reactive protein (hs-CRP) levels, were tested. Results: In this study, 58 obese Thai children (female, 20; male, 38) with a mean body mass index z score of $5.1{\pm}2.2$ were enrolled. The prevalence of MetS and prediabetes was 31% and 17.2%, respectively. None of the children had diabetes. FBG levels, 2-hour glucose levels, and lipid profiles were not statistically different between those with and without MetS. However, obese children with MetS had higher insulin levels and homeostasis model assessment of insulin resistance values. Elevated hs-CRP levels were found in 69% of the cases, although it was not statistically different between the 2 groups. Conclusion: We described a substantial prevalence of MetS in Thai obese children. Regardless of MetS status, two-thirds of the obese children had elevated hs-CRP level, indicating subtle ongoing inflammatory process. This chronic inflammation feasibly predisposes them to CVD in the future, even in children without MetS.

• Toxicological Research
• /
• v.30 no.1
• /
• pp.39-44
• /
• 2014

Bisphenol A (BPA) is widely used in the production of polycarbonate plastics, epoxy resins, and food and beverage containers. In the present study, we aimed to investigate the relationship between urinary concentrations of BPA and waist circumference in Korean adults. A total of 1,030 Korean adults (mean age, $44.3{\pm}14.6$ years) were enrolled in the study on the integrated exposure to hazardous materials for safety control, conducted by the Ministry of Food and Drug Safety from 2010 to 2012. Abdominal obesity was defined as having a waist circumference of at least 90 cm and 85 cm for men and women, respectively. The participants were divided into 4 groups according to the urinary BPA concentration quartile. Waist circumference was significantly higher among subjects with a urinary BPA concentration in the highest quartile relative to those in the lowest quartile (p = 0.0071). Linear regression analysis revealed a significant positive association between urinary BPA concentrations and body mass index, body fat, after adjusting for potential confounders. Moreover, subjects with urinary BPA concentrations in the fourth quartile were more likely to be obese compared to those with urinary BPA concentrations in the first quartile (odds ratio, 1.938; 95% CI: 1.314~2.857; p for trend = 0.0106). These findings provide evidence for a positive association between urinary BPA concentration and waist circumference in Korean adults.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.1
• /
• pp.99-106
• /
• 2013

DME (Di-Methyl Ether) is synthetic product that is produced through dehydration of methanol or a direct synthesis from syngas. And it is able to save fossil fuel and reduce pollutants of emission such as PM and $CO_2$. In spite of its advantages it is difficult to design DME fuelled engine system because DME fuel may cause to severely generate cavitation and corrosion in fuel delivery system due to physical properties of DME. Therefore, in this study three-dimensional internal flow characteristics with consideration of cavitation were predicted in the DME injector using diesel and DME fuel. Moving grid technique was employed to describe needle motion and 1-D hydraulic simulation of injector was also simulated to obtain transient needle motion profiles. The results of simulation show that cavitations was generated at the inlet of nozzle near high velocity region both diesel and DME. And mass flow rate of DME is reduced by 4.73% compared to that of diesel at maximum valve lift because cavitation region of DME is much more larger. To increase flow rate of DME injector, internal flow simulation has been conducted to investigate the nozzle hole inner R-cut effect. The flow rates of diesel and DME increase as R-cut increases, and flow coefficient of DME fuel injector was increased by 6.3% on average compared with diesel fuelled injector. Finally, optimum shape of DME injector nozzle is suggested through the comparison of flow coefficient with variation of nozzle hole inner R-cut.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.431-445
• /
• 1993

The purpose of this study was to observe corrosion characteristics of six dental amalgams and was to analyse corrosion products electrochemically. After each amalgam alloy and Hg was triturated as the direction of the manufacturer by using mechanical amalgamator, the triturated mass was inserted into the cylinderical metal mold ($12{\times}10mm$) and was condensed with 160kg/$cm^2$ by using the hydrolic press. The specimen was removed from the mold and was stored at room temperature for 1 week, and was polished with amalgam polishing kit. The anodic and cathodic polarization curve was obtained by using cyclic voltammetric method with 3-electrode potentiostat in saline for each amalgam and Ag, Sn, Cu plate specimen at $37{\pm}0.5^{\circ}C$. The potential sweep range was -1.7V~0. 4V(vs SCE) in working electrode and scan rate was 50mV/s and the exposed surface area of each specimen to the electrolytic solution was $0.79cm^2$. The results were as follows. 1. In anodic-cathodic polarization curve of amalgam specimens, two anodic current rising areas and two cathodic current peaks were obtained at the low Cu amalgam(CF, CS) specimen and three anodic current rising areas and three cathodic current peaks were obtained at the high Cu amalgam (TY, DS, HV) specimen. 2. As this compared with the anodic and cathodic current peak potentials of Sn, Cu and Ag specimen, the first cathodic current peak I c was caused by the reduction of divalent tin salt, second cathodic current peak IIIc results from the reduction of quadravalent tin salt, and third cathodic current peak me results from the reduction of copper salt. 3. As reverse potential sweeping was done repeatedly, anodic current was decreased slightly in all amalgam specimens.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.369-377
• /
• 2009

The purpose of this study was to determine the relationship between different soccer cleat designs and knee joint moments. Twelve physically active males (mean(SD): age: 26.4(6.2)yrs; height: 176.4(4.1)cm; mass: 74.0 (7.4)kg) were recruited Kinematic and force plate data were collected for all subjects during normal running and a $45^{\circ}$ cutting maneuver, called a v-cut. Both motions were performed at $4.0{\pm}0.2\;m/s$ on infilled artificial turf with three pairs of soccer cleats of different sole plate designs, and one pair of neutral running shoes. Inverse dynamics were used to calculate three dimensional knee joint moments, with repeated measures ANOVA and post hoc paired Student's t-test used to determine significance between shoe conditions. Significant differences were found in the extension moments of the knee for running trials, and for external rotation and adduction moments in the v-cutting trials. Knee moments were greater in v-cut than running, and the traditional soccer cleats (Copa Mondial and World Cup) tended to result in greater knee moments than the Nova runner or TRX soccer cleat. Cleat design was found to influence 3-dimensional knee moments in a v-cut maneuver. In the translational traction test, there were significant differences between all conditions. In the rotational traction test, friction with soccer shoes were greater than friction with running shoes. However, no differences were found between soccer shoes. Higher moments may lead to increased loads and stresses on knee joint structures, and thus, greater injury rates.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.6
• /
• pp.596-603
• /
• 2009

This study aimed to examine the influence of adding an oxygen vector, n-dodecane, on hyaluronic acid (HA) production by batch culture of Streptococcus zooepidemicus. Owing to the high viscosity of culture broth, microbial HA production during 8-16 h was limited by the oxygen transfer coefficient $K_La$, which could be enhanced by adding n-dodecane. With the addition of n-dodecane to the culture medium to a final concentration of 5% (v/v), the average value of $K_La$ during 8-16 h was increased to $36{\pm}2h^{-1}$, which was 3.6 times that of the control without n-dodecane addition. With the increased $K_La$ and dissolved oxygen (DO) by adding 5% (v/v) of n-dodecane, a 30% increase of HA production was observed compared with the control. Furthermore, the comparison of the oxygen mass transfer in the absence and presence of n-dodecane was conducted with two proposed mathematical models. The use of n-dodecane as an oxygen vector, as described in this paper, provides an efficient alternative for the optimization of other aerobic biopolymer productions, where $K_La$ is usually a limiting factor.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1149-1153
• /
• 2014

Real-time monitoring of hourly atmospheric radon (Rn-222) concentration was performed throughout 2011 at Gosan station, Jeju Island, one of the least polluted regions in Korea, in order to characterize the background levels, and temporal variations on diurnal to seasonal time-scales. The annual mean radon concentration for 2011 was $2527{\pm}1356$ mBq $m^{-3}$, and the seasonal cycle was characterized by a broad winter maximum, and narrow summer minimum. Mean monthly radon concentrations, in descending order of magnitude, were Oct > Sep > Feb > Nov > Jan > Dec > Mar > Aug > Apr > Jun > May > Jul. The maximum monthly mean value (3595 mBq $m^{-3}$, October), exceeded the minimum value (1243 mBq $m^{-3}$, July), by almost a factor of three. Diurnal composite hourly concentrations increased throughout the night to reach their maximum (2956 mBq $m^{-3}$) at around 7 a.m., after which they decreased to their minimum value (2259 mBq $m^{-3}$) at around 3 p.m. Back trajectory analyses indicated that the highest radon events typically exhibited long-term continental fetch over Asia before arriving at Jeju. In contrast, low radon events were generally correlated with air mass fetch over the North Pacific Ocean. Radon concentrations typical of predominantly continental, and predominantly oceanic fetch, differed by a factor of 3.8.

• Korean Journal of Human Ecology
• /
• v.2 no.1
• /
• pp.80-88
• /
• 1999

Hypercholesterolemia is a well known major risk factor for cardiovascular disease, now the leading cause of death in Korea. This study was carried out to examine the relationships of hypercholesterolemia(HC$\geq$240 mg/dL) with obesity, blood pressure and blood glucose level in 649 male subjects aged 20-69 in Kwangju, Korea. The mean plasma total cholesterol level was 212${\pm}$43 mg/dL, and 25.3% of the subjects was diagnosed as HC and 39.3% as nomorcholesterolemia(NC〈200 mg/dL). The prevalence of HC seemed to increase with age. The subjects with HC were highly overweighted and had higher body mass index(BMI) than the NC subjects. The incidence of overweight(25$\leq$BMI〈30) and obesity(BMI$\geq$30) among the HC subjects were 44.5%, and 1.8%, respectively. The HC subjects had higher systolic(SBP) and diastolic blood pressure(DBP) than the NC subjects. The incidence of borderline hypertension (160/95〉SBP/DBP$\geq$140/90) and hypertension(SBP/DBP$\geq$160/95) among the HC subjects were 18.3%, and 9.1%, respectively. However, there was no difference in blood glucose level between the HC and NC subjects. The plasma total cholesterol level had positive relationships with BMI(P〈0.001), weight(P〈0.001), DBP(P〈0.001), SBP(P〈0.01), and age(P〈0.01), whereas inverse relationships with height/weight ratio(P〈0.001), and height(P〈0.01). The relative risks on HC were 1.99 for obesity, 1.53 for overweight, 1.82 for hypertension, 1.44 for borderline hypertension and 1.08 for hyperglycemia. Attributable risks on HC were 0.25 for obesity, 0.11 for overweight, 0.20 for hypertension, 0.10 for borderline hypertension and 0.02 for hyperglycemia. The results indicate that the level of plasma total cholesterol was closely associated with the incidences of obesity and hypertension. (Korean J of Human Ecology 2(1) : 80-88, 1999)