• Journal of radiological science and technology
• /
• v.38 no.2
• /
• pp.81-87
• /
• 2015

This study was designed the band material in order to reduce the exposure pressure of the breast and the material was measured of Radiolucent and radiation properties with a radiation materials of PC, PMMA, Carbon. Also the image quality by image analysis to obtain the following results are below: Unfors Xi dosimetry using radiation transmittance when the results of 8.353mGy is measured after removal of the cuff, the PC 6.308mGy, PMMA 6.223mGy, Carbon 7.218mGy were measured respectively. Semi-layer PC 0.375mmAl, PMMA 0.370mmAl, with Carbon 0.360mmAl Carbon, PC, PMMA was higher radiation properties and transparency in order. InLight / OSL NanoDotTM dosimeter was used in the cuff and then removed by placing the dosimeter measured results center on 1.143mGy, at the edge 12.56mGy, on the central PC 8.990mGy, at the edge 10.291mGy, PMMA center on 8.391mGy, the edge 9.654mGy, on Carbon center 9.581mGy, 11.313 mGy were measured at the edge of Carbon, PC, PMMA showed a high permeability in order. Image Pixel average J is then removed from the cuff 976.655, PC 831.032, PMMA 819.069, Carbon 897.118 Carbon, PC, PMMA was measured by high order.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.365-368
• /
• 2008

일반적으로 6 시그마 적용사례는 제조분야 중심으로 연구 발표되는 경우가 많고, 판매나 마케팅 분야의 적용사례는 찾기 힘들실정이다. 본 논문에서는 S전자의 전문상가에서 판매되는 노트북의 판매비중을 높이기 위해 6 시그마를 적용하여 노트북의 판매비중을 높이기 위해 프로젝트를 진행하였다.

• Journal of Food Hygiene and Safety
• /
• v.6 no.3
• /
• pp.119-126
• /
• 1991

ABSTRACT - This study was performed to investigate the possible effect of Lactobacillus spp. on the growth and citrinin production by Penicillium citrinum. Lactobacillus bulgaricus and Lactobacillus casei were grown with Pen. citrinum in modified APT broth containing 7% of glucose and incubated at $30^{\circ}C$ for 15 days. Four inoculation procedures were used; (a) Lactobacillus spp. and Pen. citrinum were grown alone(Pc, Lb, and Lc), (b) both organisms were added simultaneously(ST; Pc+Lb and Pc+Lc), (c) Lactobacillus spp. was grown 3 days, then conidia of Pen. citrinum were added(LbPc and LcPc), and (d) Pen. citrinum was grown 3 days, then Lactbacillus spp. was added (PcLb and PcLc). At 0, 3, 6, 9, 12, 15 days of incubation, the growth of each organism, pH and total acidity of broth, and content of citrinin were determined. Lactobacillus spp. and Pen. citrinum, when grown associatively, influenced the growth of each other. It was observed that slower growth of Pen. citrinum when in the presence of Lactobacillus spp. than when the mold grew alone. Production of citrinin by Pen. citrinum was markedly less in the mixed culture. No apparent growth and toxin production was observed when the Lactobacillus spp. was grown 3 days, then conidia of Pen. citrinum were added(LbPc and LcPc). The above results indicate that another microorganism or competing microflora in the culture can affect the behavior of Pen. citrinum.trinum.

• Digital Contents
• /
• no.12 s.31
• /
• pp.106-112
• /
• 1995

서울 YMCA는 8월 6일부터 8월 19일까지 2주간에 걸쳐 서울 YMCA PC통신 '시청자옴부즈만'(GO.YMAN) 개설 200일을 맞아 PC통신 이용자들의 PC통신에 대한 인식 상태를 조사하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.6
• /
• pp.571-581
• /
• 2014

In the present study, hollow precast concrete wall (PC Double Wall) for staircase construction was developed. Comparing the conventional walls, the PC Double Wall can be reduced the lift weight using hollow core and improves the integrity between the PC members. The cross-section and re-bar details of the PC Double Wall were developed considering precast concrete manufacturing, constructability, and the structural safety. Particularly, a form system was developed to manufacture thin and hollow core PC wall efficiently. A mock-up test for a staircase using the PC Double wall was performed to verify the constructability and integrity of the PC walls. The test result verified that joint deformation and cracking did not occur as showing good constructability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.6
• /
• pp.816-822
• /
• 2012

Volatile components of acorn crude starches and gel powder created from them were analyzed by Gas Chromatograph-Ion Mobility Mass Spectrometry (GC-IMS). Crude starches were obtained from acorns harvested in South Korea (KAS), China (CAS), and North Korea (NAS). The principal component analysis (PCA) of each volatile component exhibited a significant contribution of PC 1 showing up to 60.5%. The acorn crude starch from KAS could be distinguished from crude starch from China by PC 1 (p<0.05). However, NAS and CAS could not be segregated statistically by the PC 1 component. PC 2, which exhibited 22.8% contribution, of KAS, also showed a meaningful difference (p<0.05) from those of CAS and NAS, making it possible to distinguish domestic acorn starch from imports.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.588-594
• /
• 2000

Structural changes of an iron phthalocyanine (FePC) monolayer induced by adsorption and externally applied potential on high area carbon surface have been investigated in situ by iron K-edge X-ray absorption fine structure (XAFS) in 0.5 M $H_2S0_4.$ Fine structures shown in the X-ray absorption near edge structure (XANES) for microcrystalline FePC decreased upon adsorption and further diminished under electrochemical conditions. Fe(II)PC(-2) showed a 1s ${\rightarrow}$ 4p transition as poorly resolved shoulder to the main absorption edge rather than a distinct peak and a weak 1s ${\rightarrow}$ 3d transition. The absorption edge position measured at half maximum was shifted from 7121.8 eV for Fe(lI)PC(-2) to 7124.8 eV for $[Fe(III)PC(-2)]^+$ as well as the 1s ${\rightarrow}$ 3d pre-edge peak being slightly enhanced. However, essentially no absorption edge shift was observed by the 1-electron reduction of Fe(Il)PC(-2), indicating that the species formed is $[Fe(II)PC(-3)]^-$. Structural parameters were obtained by analyzing extended X-ray absorption fine structure (EXAFS) oscillations with theoretical phases and amplitudes calculated from FEFF 6.01 using multiple-scattering theory. When applied to the powder FePC, the average iron-to-phthalocyanine nitrogen distance, d(Fe-$N_p$) and the coordination number were found to be 1.933 $\AA$ and 3.2, respectively, and these values are the same, within experimental error, as those reported ( $1.927\AA$ and 4). Virtually no structural changes were found upon adsorption except for the increased Debye-Wailer factor of $0.005\AA^2$ from $0.003\AA^2.$ Oxidation of Fe(II)PC(-2) to $[Fe(III)PC(-2)]^+$ yielded an increased d(Fe-Np) (1 $.98\AA)$ and Debye-Wailer factor $(0.005\AA^2).$ The formation of $[Fe(II)PC(-3)]^-$, however, produced a shorter d(Fe-$N_p$) of $1.91\AA$ the same as that of crystalline FePC within experimental error, and about the same DebyeWaller $factor(0.006\AA^2)$.

• Journal of Bio-Environment Control
• /
• v.32 no.3
• /
• pp.242-248
• /
• 2023

This study was conducted to evaluate the effects of trinexapac-ethyl (TE) and prohexadione-calcium (PC) on the growth and turf quality of perennial ryegrass (Lolium perenne L.). Treatments were designed as follows; control (non-treatment), TE (TE 0.01 a.i. g·m^-2·100mL^-1), and PC (PC 0.01 a.i. g·m^-2·100mL^-1). Compared with control, turf color index and chlorophyll content of TE and PC treatments were not significantly different. As applied plant growth regulators (PGRs), shoot length in the TE and PC was decreased by 8.9-12.4% and 6.7-13.6%, respectively, and clipping yield by 44.4-45.8% and 40.6-40.9%. When evaluated with the growth of shoot length after applying PGRs, residual days of TE and PC were 43.6 and 37.9 days after treatment of PGRs (DAT) in the 1st experiment (July 29-August 26), respectively, and 38.3 and 39.5 DATs in the 2nd experiment (September 30-October 28). These results indicated that an application of TE or PC decreased shoot length and clipping yield in the perennial ryegrass, and their residual time was about 40±3 DATs. Perennial ryegrass applied with PGRs like TE and PC was not significant seasonal difference, and might be not phytotoxic.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.2
• /
• pp.141-150
• /
• 2008

The response of grain yield(GY) and milled-rice protein content(PC) to crop growth status and nitrogen(N) rates at panicle initiation stage(PIS) is critical information for prescribing topdress N rate at PIS(Npi) for target GY and PC. Three split-split-plot experiments including various N treatments and rice cultivars were conducted in Experimental Farm, Seoul National University, Korea in 2003-2005. Shoot N density(SND, g N in shoot $m^{-2}$) and canopy reflectance were measured before N application at PIS, and GY, PC, and SND were measured at harvest. Data from the first two years(2003-2004) were used for calibrating the predictive models for GY, PC, and SND accumulated from PIS to harvest using SND at PIS and Npi by multiple stepwise regression. After that the calibrated models were used for calculating N requirement at PIS for each of nine plots based on the target PC of 6.8% and the values of SND at PIS that was estimated by canopy reflectance method in the 2005 experiment. The result showed that SND at PIS in combination with Npi were successful to predict GY, PC, and SND from PIS to harvest in the calibration dataset with the coefficients of determination ($R^2$) of 0.87, 0.73, and 0.82 and the relative errors in prediction(REP, %) of 5.5, 4.3, and 21.1%, respectively. In general, the calibrated model equations showed a little lower performance in calculating GY, PC, and SND in the validation dataset(data from 2005) but REP ranging from 3.3% for PC and 13.9% for SND accumulated from PIS to harvest was acceptable. Nitrogen rate prescription treatment(PRT) for the target PC of 6.8% reduced the coefficient of variation in PC from 4.6% in the fixed rate treatment(FRT, 3.6g N $m^{-2}$) to 2.4% in PRT and the average PC of PRT was 6.78%, being very close to the target PC of 6.8%. In addition, PRT increased GY by 42.1 $gm^{-2}$ while Npi increased by 0.63 $gm^{-2}$ compared to the FRT, resulting in high agronomic N-use efficiency of 68.8 kg grain from additional kg N. The high agronomic N-use efficiency might have resulted from the higher response of grain yield to the applied N in the prescribed N rate treatment because N rate was prescribed based on the crop growth and N status of each plot.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.5
• /
• pp.415-425
• /
• 2000

An open architecture manufacturing strategy intends to integrate manufacturing components on a single platform so that a particular component can be easily added and/or replaced. Therefore, the control scheme based upon the open architecture concept is hardware-independent. In this paper, a modular and object oriented approach for a PC-based open robot control system is investigated. A standard reference model for robot systems, which consists of three modules; hardware module, operating system module, and application software module, is first proposed. Then, a PC-based Open Robot Controller(PC-ORC), which can reconfigure robot control systems in various production environments, is developed. The PC-ORC is built upon the object-oriented method, and allows an easy implementation and modification of various modules. The PC-ORC consists of basic softwares, application objects, and additional hardware device on the PC Platform. The application objects are: sequencer, computation unit, servo control, ancillary equipment, external sensor control, and so on. In order to demonstrate the applicability of the PC-ORC, the proposed PC-ORC configuration is applied to an industrial SCARA robot system.