• Title/Summary/Keyword: $O_3$ sensitivity

Search Result 694, Processing Time 0.028 seconds

Inhibition of Foodborne Pathogens on Polystyrene, Sausage Casings, and Smoked Salmon Using Nonthermal Plasma Treatments (비열 플라즈마 처리를 이용한 polystyrene, 소시지 케이싱, 그리고 훈제연어에서의 식중독균 저해)

  • Lee, Hahn-Bit;Noh, Young-Eun;Yang, Hee-Jae;Min, Sea-Cheol
    • Korean Journal of Food Science and Technology
    • /
    • v.43 no.4
    • /
    • pp.513-517
    • /
    • 2011
  • The effects of nonthermal plasma treatments against Salmonella Typhimurium, Escherichia coli O157:H7, and Listeria monocytogenes living on polystyrene (PS), sausage casings, and smoked salmon were investigated. Inoculated PS, casings, and salmon were treated with nonthermal plasma generated with helium (5 L/min) or with both helium (5 L/min) and oxygen (100 mL/min) at 60 Hz and 30 kV/cm for 2, 5, or 10 min. S. Typhimurium exhibited the highest sensitivity to the helium-used treatment. The greatest reduction (3.9${\pm}$0.8 log$CFU/cm^2$) was observed with L. monocytogenes on PS after the treatment with the mixed gas for 5 min. The treatment with the mixed gas inhibited L. monocytogenes on casings and salmon by 0.5${\pm}$0.3 log$CFU/cm^2$ and 1.0${\pm}$0.3 log CFU/g, respectively. Different treatment times did not result in different reductions of L. monocytogenes on both casings and salmon. The types of treatment gas and material of contamination need to be considered for evaluating the antimicrobial effects of nonthermal plasma treatments.

(AlGaAs/GaAs HBT IC Chipset for 10Gbit/s Optical Receiver) (10Gbit/s 광수신기용 AlGaAs/GaAs HBT IC 칩 셋)

  • 송재호;유태환;박창수;곽봉신
    • Journal of the Korean Institute of Telematics and Electronics C
    • /
    • v.36C no.4
    • /
    • pp.45-53
    • /
    • 1999
  • A pre amplifier, a limiting amplifier, and a decision IC chipset for 10Gbit/s optical receiver was implemented with AIGaAs/GaAs HBT(Heterojunction Bipolar Transistor) technology. The HBT allows a cutoff frequency of 55GHz and a maximum oscillation of 45GHz. An optical receiver front-end was implemented with the fabricated pre amplifier IC and a PIN photodiode. It showed 46dB$\Omega$, gain and $f_{3db}$ of 12.3GHz. The limiting amplifier Ie showed 27dB small signal gain, $f_{3db}$ of 1O.6GHz, and the output is limited to 900mVp-p from 20mVp-p input voltage. The decision circuit IC showed 300-degree phase margin and input voltage sensitivity of 47mVp-p at 1OGbit/s.

  • PDF

Studies on the Seroepidemiology of Helminthic Diseases in Korea (우리나라의 주요 기생충질환(寄生蟲疾患)에 대한 혈청역학적(血淸疫學的) 조사(調査))

  • Rim, Han-Jong;Lee, Joon-Sang;Joo, Kyoung-Hwan;Chung, Myung-Sook
    • Journal of agricultural medicine and community health
    • /
    • v.16 no.1
    • /
    • pp.48-60
    • /
    • 1991
  • In a seroepidemiological study in several areas of Korea, the ELISA technique was performed to determine prevalence of some important helminthic diseases in our nation during March $15^{th}$ to June $30^{th}$. 1991. In this survey the serum antibody positive rates of anisakiasis, toxocariasis, clonorchiasis, paragonimiasis, cysticercosis, and sparganosis were measured. Among, 6,704 cases examined, 19.7% showed positive antibody titer at least one of the six items studied. Overall positive antibody rate was 8.1% in anisakiasis, 5.6% in toxocariasis, 3.6% in clonorchiasis, 1.7% in paragonimiasis, 4.5% in cysticercosis, and 2.6% in sparganosis respectively. In Pusan port southeastern part of Korea, antibody positive rate of anisakiasis was 2.9%, and clonorchiasis was 2.8% among 450 examine. In TaeJ$\check{o}$n city, central part of Korea. toxocariasis(6.7%) and anisakiasis(3.7%) showed high serologic positive rate. Of the 875 persons in Chunche$\check{o}$n gun(=province), northern central rural area of South Korea, anisakiasis was revealed as 3.4% seropositivity. In Tonghae port, eastern coast of South Korea. 9.9% of population examined showed positive antibody titer in anisakiasis. Of the 1,122 persons examined in Southern part of Cholla-Namdo(Southwestern coastal area of Korea), anisakiasis was 16.9%, cysticerocosis was 12.7% and the paragonimiasis was 3.3% respectively. In some localized area of Cholla-Pukdo, anisakiasis was 9.3% and cysticekosis was 4.3% among 702 cases examined. In some localized area of Kyungsang-Pukdo, anisakiasis was 10.6%. and toxocariasis was 16.1% among 900 cases examined. And finally, in Cheju-do, southern island of Korea, anisakiasis showed high positive rate(6.7%). Because cross reactions between related helminth group may disturb the analysis of these data, use of further developed techniques such as EITB(enzyme-linked immunoelectrotransfer blot) was considered as a essential tools for the study. We thought that probably most of the positive cases of cysticerosis were taeniasis cases. We can't rule out taeniasis even though EITB was employed as far as crude worm extract or cystic fluid of cysticercus was used as antigen. It was well Known that toxocariasis and anisakiasis also showed cross reactivity. However, the data presented here focus on seropositive rate of several helminthic diseases in Korea, not true prevalence rate of helminthiases, and to wait for more expensive purified antigen in sufficient amount for epidemiologic use is not necessary because increased immunologic sensitivity had little effect on epidemiologic sensitivity. We, here, suggest that ELISA should be applied as soon as possible to the evaluation of prevalence of tissue invading parasitic diseases, and a review of the antibody positive rate obtained in this study would be a basic data for controlling program of parasitic diseases in Korea.

  • PDF

Thin dielectric diaphragm pressure sensor with optical readout (광학적 신호감지의 유전박막 다이아프레임을 이용하는 압력센서)

  • Kim, Myung-Gyoo;Ryu, Yang-Woog;Park, Dong-Soo;Kim, Jin-Sup;Lee, Jung-Hee;Sohn, Byung-Ki
    • Journal of Sensor Science and Technology
    • /
    • v.5 no.4
    • /
    • pp.1-7
    • /
    • 1996
  • Optical intensity-type pressure sensor was fabricated by coupling optical fiber with a micromachined thin dielectric diaphragm, which consists of a 300 nm thick $SiO_{2}$ layer sandwiched between 150 nm thick top and bottom $Si_{3}N_{4}$ layers. At the wavelength of the sensor light source near $1.3\;{\mu}m$, the optical transmittance of the diaphragm was about 50 %, but it was decreased to a few percents by depositing $1,000\;{\AA}$ thick gold(Au) layer on the diaphragm, which is sufficient enough to be used as a light reflection layer of the sensor. From the optical output power-pressure characteristics of the sensors, it was found that the output power linearly decreased with increasing applied pressure from 0 to 77 torr regardless of the diaphragm size. The respective sensitivities were 0.52, 0.65, and 0.77 nW/torr for the diaphragm sizes of $3{\times}3$, $4{\times}4$, and $5{\times}5\;mm^{2}$, indicating that the sensitivity increases as diaphragm size decreases.

  • PDF

Characteristics and Fabrication of Micro-Gas Sensors with Heater and Sensing Electrode on the Same Plane (동일면상에 heater와 감지전극을 형성한 마이크로가스센서의 제작 및 특성)

  • Lim, Jun-Woo;Lee, Sang-Mun;Kang, Bong-Hwi;Chung, Wan-Young;Lee, Duk-Dong
    • Journal of Sensor Science and Technology
    • /
    • v.8 no.2
    • /
    • pp.115-123
    • /
    • 1999
  • A micro-gas sensor with heater and sensing electrode on the same plane was fabricated on phosphosilicate glass(PSG, 800nm)/$Si_3N_4$ (150nm) dielectric membrane. PSG film was provided by atmospheric pressure chemical vapor deposition(APCVD), and $Si_3N_4$ film by low pressure chemical vapor deposition (LPCVD). Total area of the fabricated device was $3.78{\times}3.78mm^2$. The area of diaphragm was $1.5{\times}1.5mm^2$, and that of the sensing layer was $0.24{\times}0.24mm^2$. Finite-element simulation was employed to estimate temperature distribution for a square-shaped diaphragm. The power consumption of Pt heater was about 85mW at $350^{\circ}C$. Tin thin films were deposited on the silicon substrate by thermal evaporation at room temperature and $232^{\circ}C$, and tin oxide films($SnO_2$) were prepared by thermal oxidation of the metallic tin films at $650^{\circ}C$ for 3 hours in oxygen ambient. The film analyses were carried out by SEM and XRD techniques. Effects of humidity and ambient temperature on the resistance of the sensing layer were found to be negligible. The fabricated micro-gas sensor exhibited high sensitivity to butane gas.

  • PDF

Effects of Steroid Hormone in Avian Follicles

  • Caicedo Rivas, R.E.;Nieto, M. Paz-Calderon;Kamiyoshi, M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.29 no.4
    • /
    • pp.487-499
    • /
    • 2016
  • The aim of the present study was to examine the effects of testosterone (T) and estradiol-$17{\beta}$ ($E_2$) on the production of progesterone ($P_4$) by granulosa cells, and of the $E_2$ on the production of $P_4$ and T by theca internal cells. In the first experiment, granulosa cells isolated from the largest ($F_1$) and third largest ($F_3$) preovulatory follicle were incubated for 4 h in short-term culture system, $P_4$ production by granulosa cells of both $F_1$ and $F_3$ was increased in a dose-dependent manner by ovine luteinizing hormone (oLH), but not T or $E_2$. In the second experiment, $F_1$ and $F_3$ granulosa cells cultured for 48 h in the developed monolayer culture system were recultured for an additional 48 h with increasing doses of various physiological active substances existing in the ovary, including T and $E_2$. Basal $P_4$ production for 48 h during 48 to 96 h of the cultured was about nine fold greater by $F_1$ granulosa cells than by $F_3$ granulosa cells. In substances examined oLH, chicken vasoactive intestinal polypeptide (cVIP) and T, but not $E_2$, stimulated in a dose-dependent manner $P_4$ production in both $F_1$ and $F_3$ granulosa cells. In addition, when the time course of $P_4$ production by $F_1$ granulosa cells in response to oLH, cVIP, T and $E_2$ was examined for 48 h during 48 to 96 h of culture, although $E_2$ had no effect on $P_4$ production by granulosa cells of $F_1$ during the period from 48 to 96 h of culture, $P_4$ production with oLH was found to be increased at 4 h of the culture, with a maximal 9.14 fold level at 6 h. By contrast, $P_4$ production with cVIP and T increased significantly (p<0.05) from 8 and 12 h of the culture, respectively, with maximal 6.50 fold response at 12 h and 6, 48 fold responses at 36 h. Furthermore, when $F_1$ granulosa cells were precultured with $E_2$ for various times before 4 h culture with oLH at 96 h of culture, the increase in $P_4$ production in response to oLH with a dose-related manner was only found at a pretreatment time of more than 12 h. In the third experiment, theca internal cells of $F_1$, $F_2$ and the largest third to fifth preovulatory follicles ($F_{3-5}$) were incubated for 4 h in short-term culture system with increasing doses of $E_2$. The production of $P_4$ and T by theca internal cells were increased with the addition of $E_2$ of $10^{-6}M$. These increases were greater in smaller follicles. These results indicate that, in granulosa cells of the hen, T may have a direct stimulatory action in the long term on $P_4$ production, and on $E_2$ in long-term action which may enhance the sensitivity to LH for $P_4$ production, and thus, in theca internal cells, $E_2$ in short term action may stimulate the production of $P_4$ and T.

An Analysis on the National Economic Contribution of the Chinese Textile Industry (중국 섬유산업의 국민경제적 기여도 분석)

  • Wang, Si-Yi;Meng, Hai-Yang;Bae, Ki-Hyung
    • The Journal of the Korea Contents Association
    • /
    • v.16 no.8
    • /
    • pp.651-660
    • /
    • 2016
  • This study analyzed the contribution of the national economy, China's textile industry by 2010 I-O Table issued by the Chinese Bureau of Statistics 2013. The results shows that the production inducement coefficient of China's textile industry is the column total 3.6228 and in line total 3.5452, is a key industry that leads the industry in China. Second, the index of the power of dispersion of the Chinese textile industry is 1.1982, index of the sensitivity of dispersion is 1.1725. Third, income inducement coefficient of China's textile industry 0.5228, tax inducement coefficient 0.1522, a value-added inducement coefficient 1. Especially China's textile industry induce 2993.6 trillion yuan(textile industry of 8.6 trillion yuan, up 3.0%) in the national production, value-added inducement 97.1 trillion yuan (textile industry 1.7 trillion yuan, up 2.0%), income inducement 42.8 trillion yuan (textile industry 0.9 one trillion yuan, 2.0%), also tax inducement 15.4 trillion yuan (textile industry 0.3 one trillion yuan, 2.0%).

Study of The Anisotropy of Electron Energy Distribution of Optical-Field Ionized Oxygen Plasma by Using Polarization Spectroscopy

  • Kim, Dong-Eon;Kim, Jae-Hoon;Kawachi, Tetsuya;Hasegawa, Noboru;Sukegawa, Kouta;Iwamae, Atsushi;Fujimoto, Takashi
    • Journal of the Optical Society of Korea
    • /
    • v.7 no.3
    • /
    • pp.145-149
    • /
    • 2003
  • The anisotropy of electron energy distribution in oxygen plasmas produced by a high intensity laser was investigated by using polarization spectroscopy. An ultra-short pulsed laser with a pulse duration of 66.5 fs and a power density of $1 {\times} 10^17/ W/$\textrm{cm}^2$$ was used. At this power density and pulse duration, the plasma was generated predominantly by optical field ionization. The degree of polarization of OVI 1s$^2$2p$^2$p2- 1s$^2$4d$^2$D$^{0}$ (J = 1/2-3/2 and 3/2-5/2) transition line at 129.92 $\AA$ was measured. O VI 1s$^2$2p$^2$P$^2$ -1s$^2$4s$^2$S$^2$ (J = 1/2-1/2 and 3/2-1/2) transition line at 132.26 $\AA$ was used to calibrate the sensitivity of the optical system. The dependencies of the degree of polarization on the initial gas density and on the laser polarization were investigated. When the laser polarization was changed from a linear to a circular polarization, the degree of polarization was decreased. When the initial gas density was increased, the degree of polarization was decreased.

Analysis of Economic Effects of Beauty Industry by Input-Output Table (뷰티산업의 경제적 효과분석 연구)

  • Bae, Ki-Hyung;Lee, Yun-Jin
    • The Journal of the Korea Contents Association
    • /
    • v.13 no.4
    • /
    • pp.350-360
    • /
    • 2013
  • The purpose of this study was to analyze how much the beauty industry contributes to the national economy by measuring economic spreading effects of beauty industry on national economy. To achieve this purpose, the study used the beauty Input-Output Table of year 2009 of korea. The results shows that beauty industry induce 598,453 billion won of national production, especially beauty industry shows that production inducement coefficient is 1.810,Index of the power of dispersion is 0.965, index of the sensitivity of dispersion is 0.534, value-added coefficient is 0.728, and labor inducement coefficient is 0.039. The beauty industry's final demand 11,004 won be put into the national economy, GDP inducement 598,438 one billion won in the beauty industry one billion won 11,029 accounted for 1.8% of the total, and the value-added inducement 4,947 billion(2.3%),tax inducement 23,798.5 billion(3.5 %), income inducement 91,187 billion(2.5%). Regarding the industrial linkage effect, beauty industry has an relatively higher growth potential in the national economy than other the manufacturing industry.

Growth of Thin Film Using Chemical Bath Deposition Method and Their Photoconductive Characteristics (CBD 방법에 의한 CdS 박막의 성장과 광전도 특성)

  • Hong, K.J.;Lee, S.Y.;You, S.H.;Suh, S.S.;Moon, J.D.;Shin, Y.J.;Jeoung, T.S.;Shin, H.K.;Kim, T.S.;Song, J.H.;Rheu, K.S.
    • Journal of Sensor Science and Technology
    • /
    • v.2 no.1
    • /
    • pp.3-10
    • /
    • 1993
  • Polycrystalline CdS thin films were grown on ceramic substrate using a chemical bath deposition method. They were annealed at various temperature and X-ray diffraction patterns were measured by X-ray diffractometer in order to study CdS polycrystal structure. Using extrapolation method of X-ray diffraction patterns for the CdS samples annealed in $N_{2}$ gas at $550^{\circ}C$ it was found hexagonal structure whose lattice constants $a_{o}$ and $c_{o}$ were $4.1364{\AA}$ and $6.7129{\AA}$, respectively. Its grain size was about $0.35{\mu}m$. Hall effect on this sample was measured by Van der Pauw method and studied on carrier density and mobility defending on temperature. From Hall data, the mobility was likely to be decreased by piezo electric scattering at temperature range of 33K and 150k and by polar optical scattering at temperature range of 150K and 293K. We measured also spectral response, sensitivity (${\gamma}$), maximum allowable power dissipation and response time on these samples.

  • PDF