• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1195-1206
• /
• 2011

This study was conducted to apply LCA (Life cycle assessment) methodology to lettuce (Lactuca sativa L.) production systems in Namyang-ju as a case study. Five lettuce growing farms with three different farming systems (two farms with organic farming system, one farm with a system without agricultural chemicals and two farms with conventional farming system) were selected at Namyangju city of Gyeonggi-province in Korea. The input data for LCA were collected by interviewing with the farmers. The system boundary was set at a cropping season without heating and cooling system for reducing uncertainties in data collection and calculation. Sensitivity analysis was carried out to find out the effect of type and amount of fertilizer and energy use on GHG (Greenhouse Gas) emission. The results of establishing GTG (Gate-to-Gate) inventory revealed that the quantity of fertilizer and energy input had the largest value in producing 1 kg lettuce, the amount of pesticide input the smallest. The amount of electricity input was the largest in all farms except farm 1 which purchased seedlings from outside. The quantity of direct field emission of $CO_2$, $CH_4$ and $N_2O$ from farm 1 to farm 5 were 6.79E-03 (farm 1), 8.10E-03 (farm 2), 1.82E-02 (farm 3), 7.51E-02 (farm 4) and 1.61E-02 (farm 5) kg $kg^{-1}$ lettuce, respectively. According to the result of LCI analysis focused on GHG, it was observed that $CO_2$ emission was 2.92E-01 (farm 1), 3.76E-01 (farm 2), 4.11E-01 (farm 3), 9.40E-01 (farm 4) and $5.37E-01kg\;CO_2\;kg^{-1}\;lettuce$ (farm 5), respectively. Carbon dioxide contribute to the most GHG emission. Carbon dioxide was mainly emitted in the process of energy production, which occupied 67~91% of $CO_2$ emission from every production process from 5 farms. Due to higher proportion of $CO_2$ emission from production of compound fertilizer in conventional crop system, conventional crop system had lower proportion of $CO_2$ emission from energy production than organic crop system did. With increasing inorganic fertilizer input, the process of lettuce cultivation covered higher proportion in $N_2O$ emission. Therefore, farms 1 and 2 covered 87% of total $N_2O$ emission; and farm 3 covered 64%. The carbon footprints from farm 1 to farm 5 were 3.40E-01 (farm 1), 4.31E-01 (farm 2), 5.32E-01 (farm 3), 1.08E+00 (farm 4) and 6.14E-01 (farm 5) kg $CO_2$-eq. $kg^{-1}$ lettuce, respectively. Results of sensitivity analysis revealed the soybean meal was the most sensitive among 4 types of fertilizer. The value of compound fertilizer was the least sensitive among every fertilizer imput. Electricity showed the largest sensitivity on $CO_2$ emission. However, the value of $N_2O$ variation was almost zero.

• Journal of Sensor Science and Technology
• /
• v.6 no.1
• /
• pp.6-15
• /
• 1997

This paper presents the multi-objective optimal design of thermopile sensor having beam or membrane structure. The thermopile sensor is composed of $Si_{3}N_{4}/SiO_{2}$ dielectric membrane, Al-polysilicon thermocouples and $RuO_{2}$ thin film for black body. The sensing method is based on the Seebeck effect which is originated from the temperature difference of the two positions, black body and silicon rim. The objective functions of the presented design are sensitivity, detectivity and thermal time constant. The modelling of the sensor is proposed including the package. The multi-objective optimization technique is applied to the design of the sensor not only inspecting the modelling equation but also simulating mathematical programming method. Especially, fuzzy optimization technique is adapted to get the optimal solution which enables the designer to reach the more practical solution. The design constraint of the voltage output originated from the change of the environmental temperature is included for practical use.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1295-1296
• /
• 2008

Hydrogen peroxide ($H_2O_2$) biosensor is one of the most developing sensors because this kind of sensors is highly selective and responds quickly to the specific substrate. Hemoglobin (Hb) has been used as ideal biomolecules to construct hydrogen peroxide biosensors because of their high selectivity to $H_2O_2$. The direct electron transfer of Hb has widely investigated for application in the determination of $H_2O_2$ because of its simplicity, high selectivity and intrinsic sensitivity. An electrochemical detection for hydrogen peroxide was investigated based on immobilization of hemoglobin on DNA/Fe(pyterpy)$^{2+}$ modified gold electrode. The pyterpy monolayers were firstly an electron deposition onto the gold electrode surface of the quartz crystal microbalance (QCM). It is offered a template to attach negatively charged DNA. The fabrication process of the electrode was verified by quartz crystal analyzer (QCA). The experimental parameters such as pH, applied potential and amperometric response were evaluated and optimized. Under the optimized conditions, this sensor shows the linear response within the range between $3.0{\times}10^{-6}$ to $9.0{|times}10^{-4}$ M concentrations of $H_2O_2$. The detection limit was determined to be $9{\times}10^{-7}$ M (based on the S/N=3).

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.320-324
• /
• 2010

Five different enrichment methods were studied to find an optimal method to recover Yersinia enterocolitica from swine feed samples. When the recovery of Y. enterocolitica GER-C (serotype O:3) strain was studied at 1000 CFU/g feed, phosphate-buffered saline (PBS) enrichment at $4^{\circ}C$ and PBS plus sorbitol and bile salts (PSB) enrichment at $4^{\circ}C$ and $21^{\circ}C$ were not effective (< 22%). In contrast, both irgasan-ticarcillin-potassium chlorate (ITC) and tryptic soy broth plus polymyxin B sulfate and novobiocin (TSBPN) enrichment methods showed a full recovery (100%) at 100-1000 CFU/g feed. At 10 CFU/g feed, both ITC and TSBPN methods still recovered the strain (> 50%). In recovery of ATCC 9610 (serotype O:8) strain, TSBPN method was more sensitive than any other methods (P < 0.05) at 1000 CFU/g feed. Using TSBPN method, the strain was still recovered at 100 CFU/g feed, but not at 10 CFU/g feed. With its sensitivity and relatively simple recipe, TSBPN was most desirable method to recover Y. enterocolitica from swine feed samples.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.1016-1020
• /
• 1997

Treatments of irradiation alone and/or in combination with heat were investigated for the sterilization of Escherichia coli O157: H7. D values of the strain were 129.2 min at $50^{\circ}C$, 27.1 min at $55^{\circ}C$, and 2.4 min at $60^{\circ}C$. The survival effect of E. coli O157:H7 during heating at various media was investigated. On heating at temperature of $60^{\circ}C$ for 10 min, the strain was generally more resistant in the media containg such chemical substrates such as 0.03 M cysteine, 1% sodium citrate or 5% sucrose, whereas this strain was appeared weaker in the chemical substrates added group such as 1% meat extract, 1% casein or 1% casamino acid. In the case of irradiation alone, $D_{10}$ value of E. coli O157:H7 was 0.116 kGy, and inactivation factors were $17{\sim}25$ at doses of 2 to 3 kGy. Pre-and post-irradiation heating showed the same $D_{10}$ value about 0.07 kGy. And Inactivation factors were $25{\sim}41$ at doses of 2 to 3 kGy. Therefore, combination treatment with heat and irradiation significantly increased in inactivation rate by increasing radiation sensitivity of E. coli O157:H7.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.11
• /
• pp.696-701
• /
• 2014

In this study, in order to develop coupled vibration mode piezoelectric devices for Acoustic Emission (abbreviated as AE) sensor application with outstanding displacement and piezoelectric properties have been simulated by ATILA FEM program. And, From the results of ATILA simulation, the AE sensor specimen, obtained superior electromechanical coupling factor and displacement, when the size of specimen is $3.45mm{\Phi}{\times}3.45mm$ with ratio of diameter/thickness(${\Phi}/T$)= 1.0. Therefore, AE sensor was fabricated by (Na,K,Li)(Nb,Ta) $O_3$(abbreviated as NKL-NT) system piezoelectric ceramics using coupled vibration mode. The piezoelectric properties of NKL-NT ceramics was exhibited that piezoelectric constant($d_{33}$), piezoelectric voltage constant($g_{33}$) and electro mechanical coupling factor($k_p$) have the excellent values of 261[pC/N], 40.10[$10^{-3}Vm/N$], and 0.44, respectively. The manufactured piezoelectric device with ratio of ${\Phi}/T$= 1.0 indicated the optimum values of resonant frequency(fr)= 556.5[kHz], antiresonant frequency(fa)=631.1[kHz], and effective electromechanical coupling factor(keff)= 0.473. The maximum sensitivity of the coupled vibration mode AE sensor was 55[dB] at the resonant frequency of 75[kHz]. The results show that the coupled vibration mode piezoelectric device is a promising candidate for the application AE sensor piezoelectric device.

• Journal of the Korean Ceramic Society
• /
• v.50 no.1
• /
• pp.63-69
• /
• 2013

Negative-temperature coefficient (NTC) thermistors based on nickel manganite spinel ($NiMn_2O_4$) are widely used for many applications, such as sensors and temperature compensators, due to their good thermistor characteristics and stabilities. However, to achieve thermistors with a high NTC B constant, which is an important figure of merit pertaining to the degree of temperature sensitivity, the activation energy should be high such that high resistivity at ambient temperatures results. To obtain a high B constant and low resistivity, Al and Si modified spinel structured $Ni_{0.6}Si_{0.2}Al_{0.6}Mn_{1.6}O_4$ hybrid thick films with the conducting metal oxide of $LaNiO_3$ were fabricated on a glass substrate by aerosol deposition at room temperature (RT). The NTC-$LaNiO_3$ hybrid thick films showed resistivity as low as < $100k{\Omega}\;cm$ at $90^{\circ}C$, which is one or two orders of magnitude lower than that of the monolithic NTC films, while retaining a high B constant of $NiMn_2O_4$ of over 5500 K when 20 wt% $LaNiO_3$ was added without a post-thermal treatment. These phenomena are explained by the percolation threshold mechanism.

• Microbiology and Biotechnology Letters
• /
• v.1 no.1
• /
• pp.51-57
• /
• 1973

2,2'-Methylene bis (3,4,6-trichloroacetoxy benzene) had been synthesized from Hexachlorophene. The eleven new derivatives -(2,2'Methylene bis [3,4,6-trichloro o-(${\beta}$-anilinopropionoxy) benzene]: m. p 173∼4$^{\circ}C$, C$\_$31/H$\_$24/N$_2$O$_4$Cl$\_$6/, 2,2' Methylene bis [3,4,6-trichloro (${\beta}$-Cyclohexylaminopropionoxy) benzene]: M. P, 187∼8$^{\circ}C$, C$\_$31/H$\_$36/N$_2$O$_4$Cl$\_$6/, 2,2'-Methylene bis [3,4,6-trichloro (${\beta}$-phenyl hydrazinopropionoxy) benzene]; M. P. 151∼3$^{\circ}C$, C$\_$33/H$\_$28/N$_2$O$_4$Cl$\_$6/, 2,2'-Methylene bis [3,4,6-trichloro (${\beta}$-o-toluidinopropionoxy) benzene]: M. P. 172∼3$^{\circ}C$, C$\_$33/H$\_$28/N$_2$O$_4$Cl$\_$6/, 2,2'-Methylene bis [3,4,6-trichloro (${\beta}$-p-todudinopropionoxy) benzene]: 153∼4$^{\circ}C$, C$\_$33/H$\_$28/N$_2$O$_4$Cl$\_$6/, 2,2'-Methylene bis [3,4,6-trichloro (${\beta}$-o-chloro anilinopropionoxy) benzene]: 170∼2$^{\circ}C$, C$\_$31/H$\_$27/N$_2$O$_4$Cl$\_$8/, 2,2'-Methylene bis [3,4,6-trichloro (${\beta}$-p-sulfamilinopropionoxy) bengene]: M. P. 310-5$^{\circ}C$, C$\_$31/H$\_$24/N$_2$S$_2$O$\_$10/Cl$\_$8/, 2,2'-Methylene bis [3,4,6-trichloro (${\beta}$-piperidinopropionoxy) benzene]: M. P. 168∼2$^{\circ}C$, C$\_$29/H$\_$32/N$_2$O$_4$Cl$\_$6/, 2,2'-Methylene bis (3,4,6-trichloro (${\beta}$-morpholinopropionoxy) benzene]: M. P. 226∼8$^{\circ}C$, C$\_$27/H$\_$28/N$_2$O$\_$6/Cl$\_$6/, 2,2'-Methylene bis (3,4,6-trichloro (${\beta}$-2-amino pyridino propionoxy) benzene]; M. P. 145∼6$^{\circ}C$, C$\_$29/H$\_$22/N$_4$O$_4$Cl$\_$5/-were synthesized by Mannichs reaction as potential antimicrobial agents and their antimicrobial activity were tested against Bacillus subtilis, Pseudomonas ovalis, Escherichia coli, Staphylococcus aureus, aerogenes, Bacillus Acerobacter Polymyxa, Bacillus brevis, Streptomyces griseus, Candida troficalis, Rhodotorula glutinis, Candida utilis, Hansenula anamola, Saccharomyces cerevisiae in vitro. Among them, compounds of benzylamine and p-toludine showed an effective antimibrobial activity againt Bacillus subtilis and Pseudomonas ovalis.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1657-1659
• /
• 1999

Our $CO_2$ sensor is based on an electrochemical reaction involving NASICON, Ba-Stabilized $Na_2CO_3$, two Pt electrodes, $O_2$, and $CO_2$.. NASICON thin films were deposited by pulsed laser deposition(PLD). The sensitive electrode made of Ba-stabilized sodium carbonate was magnetron sputtered. An emf between two Pt electrodes was proportional to the logarism of the concentration of $CO_2$ in the ambient. This sensor has a sensitivity of 3.82mV/decade and does not show any saturation for $CO_2$ concentration as high as 200,000 ppm.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1061-1064
• /
• 2013

A known $Hg^{2+}$ selective rhodamine B derivatised probe 1 was reinvestigated as a colorimetric and fluorescent probe for $Cu^{2+}$ through changing the applied solvent media. Probe 1 exhibited good selectivity and sensitivity to $Cu^{2+}$ in $CH_3CN-H_2O$ (7:3, v/v, HEPES 10 mM, pH 7.0) solution with a detection limit of $9.74{\times}10^{-7}$ M. The $Cu^{2+}$ sensing event was proved to be irreversible through hydrolysis of 1 to release rhodamine B.