Vasan Palanisamy;Sakthivel PC;Lane Pineda;Yanming Han
Animal Bioscience
/
제36권11호
/
pp.1709-1717
/
2023
Objective: A pivotal study was designed to investigate the effect of Hydroxy (HYC) Cu, Zn, and Mn on egg quality and laying performance of chickens under tropical conditions. Methods: A total of 1,260 Babcock White laying hens (20-wk-old) were randomly assigned to one of 4 treatments with 15 replicates of 21 hens each in a Randomized Complete Block Design. The birds were reared for 16 weeks and were fed the corn-soybean meal diets supplemented with one of the following mineral treatments: T1, inorganic (INO, 15 ppm CuSO4, 80ppm MnSO4 and 80 ppm ZnO); T2, Hydroxy-nutritional level (HYC-Nut, 15 ppm Cu, 80 ppm Mn, 80 ppm Zn from Hydroxy); T3, Hydroxy-Low (HYC-Low, 15 ppm Cu, 60 ppm Mn, 60 ppm Zn from Hydroxy); T4, Hydroxy plus inorganic (HYC+INO, 7.5 ppm HYC Cu+7.5 ppm CuSO4, 40 ppm HYC ZnO+40 ppm ZnSO4, 40 ppm HYC Mn+40 ppm MnSO4). The egg production was recorded daily, while the feed consumption, feed conversion ratio (FCR) and egg mass were determined at the end of each laying period. The egg quality parameters were assayed in eggs collected over 48 h in each laying period. Results: Overall, no significant effect of treatments was observed on percent egg production, egg weight and FCR (p>0.05). Feed intake was significantly lower in birds fed Hydroxy plus inorganic (p<0.05) diet. The supplementation of HYC-Low significantly increased the egg mass compared to the other treatments (p<0.05). HYC supplementation alone or in combination with INO elicited a positive effect on shell thickness, shell weight, shell weight per unit surface area, yolk colour, albumen and yolk index for a certain period (p<0.05), but not throughout the whole laying period. Conclusion: Dietary supplementation of HYC-Low (15-60-60 mg/kg) showed similar effects on production performance and egg quality characteristics in laying hens as compared to 15-80-80 mg/kg of Cu-Zn-Mn from inorganic sources. This indicates that sulphate based inorganic trace minerals can effectively be substituted by lower concentration of hydroxyl minerals.
Rony Lizana, Riveros;Rosiane, de Sousa Camargos;Marcos, Macari;Matheus, de Paula Reis;Bruno Balbino, Leme;Nilva Kazue, Sakomura
Animal Bioscience
/
제36권1호
/
pp.75-83
/
2023
Objective: The objective of this study was to describe a methodological procedure to quantify the heat production (HP) partitioning in basal metabolism or fasting heat production (FHP), heat production due to physical activity (HPA), and the thermic effect of feeding (TEF) in roosters. Methods: Eighteen 54-wk-old Hy Line Brown roosters (2.916±0.15 kg) were allocated in an open-circuit chamber of respirometry for O2 consumption (VO2), CO2 production (VCO2), and physical activity (PA) measurements, under environmental comfort conditions, following the protocol: adaptation (3 d), ad libitum feeding (1 d), and fasting conditions (1 d). The Brouwer equation was used to calculate the HP from VO2 and VCO2. The plateau-FHP (parameter L) was estimated through the broken line model: HP = U×(R-t)×I+L; I = 1 if t<R or I = 0 if t>R; Where the broken-point (R) was assigned as the time (t) that defined the difference between a short and long fasting period, I is conditional, and U is the decreasing rate after the feed was withdrawn. The HP components description was characterized by three events: ad libitum feeding and short and long fasting periods. Linear regression was adjusted between physical activity (PA) and HP to determine the HPA and to estimate the standardized FHP (st-FHP) as the intercept of PA = 0. Results: The time when plateau-FHP was reached at 11.7 h after withdrawal feed, with a mean value of 386 kJ/kg0.75/d, differing in 32 kJ from st-FHP (354 kJ/kg0.75/d). The slope of HP per unit of PA was 4.52 kJ/mV. The total HP in roosters partitioned into the st-FHP, termal effect of feeding (TEF), and HPA was 56.6%, 25.7%, and 17.7%, respectively. Conclusion: The FHP represents the largest fraction of energy expenditure in roosters, followed by the TEF. Furthermore, the PA increased the variation of HP measurements.
미량오염물질의 산화 및 대체 소독제로 각광받는 오존처리의 하수 2차 처리수중에 잔류하는 의약품류에 대한 제거 성능을 검토하였다. 또한, 의약품류의 제거를 목적으로 한 오존처리에 의한 미생물의 불활성화에 대하여 고찰하였다. 본 연구에서는 시험수로써 하수 2차 처리수를 이용하였으며, 오존처리는 2 mg/L, 4 mg/L, 6 mg/L의 오존 주입량으로 행하였다. 오존처리에 의해 시험수중에서 검출된 37종의 의약품류를 효과적으로 제거하기 위해서는 6 mg/L의 오존 주입량 (오존 소비량 : 4.4 mg/L)이 요구되었다. 동일한 오존처리 조건하에서는 대장균군 및 enteroviruses에 대해 약 3 log의 불활성화가 달성가능할 것으로 고찰되어, 잔류 의약품류의 제거 뿐만 아니라 병원성 미생물에 대해서도 효과적인 소독효과를 달성할 수 있을 것으로 판단되었다. 반면, 6 mg/L의 오존 주입량을 이용한 오존처리시, 처리수중의 용존오존농도가 약 1.8 mg/L까지 증가하여, 발암성 물질인 브로메이트의 생성가능성이 높아질 것으로 예상되었다. 이러한 브로메이트의 생성을 억제하기 위해서는 오존처리와 UV 또는 $H_2O_2$와의 조합공정인 고도산화처리공정에 대한 검토가 필요할 것으로 판단되었다.
플래시 메모리는 비휘발성, 저전력, 빠른 입출력, 충격에 강함 등과 같은 많은 장점을 가지고 있으며, 모바일 기기에서의 저장 매체로 자주 사용이 증가 되고 있다. 이에 따라 임베디드 디바이스에 널리 사용되는 NAND 플래시 전용 파일시스템인 YAFFS에 관한 연구가 활발히 이루어지고 있다. 하지만 기존의 YAFFS는 마운트 시 모든 페이지의 스페어 영역을 스캔함으로써 마운트 속도가 상당히 오래 걸리며, 기존의 지움 정책에서 플래시메모리의 특성인 마모도 제한을 고려하지 않은 지움 정책(Cartage-Collection)을 사용하는 문제점을 가지고 있다. 따라서 본 논문에서는 YAFFS의 마운트 과정에서의 문제점을 해결하기 위해 블록을 내용기반 리스트로 관리하고 마운트 할 때 일부 스페어 영역만을 읽어 기존의 마운트 시간을 감소시키는 기법을 제시한다. 또한 기존의 마모도 기법의 문제점을 해결하기 위해 내용기반 지움 정책을 사용하는 블록 스왑기법을 제안 한다. 실험에서는 파일의 크기를 다양하게 분류하여 기존의 파일시스템들과 비교하였다. 내용기반 YAFFS가 JFFS2보다는 82.2% 기존의 YAFFS보다는 42.9%의 마운트 평균시간이 감소하였으며, 기존의 지움 정책과 비교하여 추가적인 삭제나 지움 횟수가 없으며 제안한 블록 스왑기법은 마모도를 균일화하여 약 35%의 수명 증가를 보여준다.
Choi, Jungmin;Lee, Sang In;Rackerby, Bryna;Moppert, Ian;McGorrin, Robert;Ha, Sang-Do;Park, Si Hong
한국식품위생안전성학회지
/
제34권1호
/
pp.1-12
/
2019
신선한 농산물 섭취와 관련된 많은 장점들이 전세계적으로 발표되고 있으며, 지속적인 섭취를 장려하고 있다. 일반적으로 과일과 채소는 최소한으로 가공되기 때문에 천연의 성분들이 건강을 증진시키는 역할을 하기도 하지만 그만큼 질병을 일으킬 수 있는 매개체가 존재할 수 있는 가능성이 매우 높다. 세계 보건기구 (WHO)의 보고서에 따르면 10명 중 1명이 식품에 의해 발생하는 질병으로 고통 받고 있으며, 전 세계적으로 매년 42만 명이 식중독으로 사망하는 것으로 밝혀졌다. 이러한 신선 식품은 농장에서 수확할 때부터 소비자의 식탁에 오르기까지 다양한 경로에서 쉽게 오염 될 수 있다. 본 리뷰논문에서는 신선식품에 의해 발생할 수 있는 질병을 이해하기 위해 화학적, 생물학적, 그리고 물리학적 위험요소로부터 식중독을 일으키는 원인과, 증상, 그리고 검출 방법에 대해서 기술 하였다. 화학적 위험요소의 대표적인 예로는 농약(살충제, 살균제, 및 제초제), 천연 독소 (곰팡이 독소 및 식물 독소), 그리고 중금속 (수은 및 카드뮴) 등이 있으며 이는 크로마토그래피 및 나노 기술 등을 이용하여 검출 할 수 있다. 하지만, 여러 실험에도 불구하고 화학적 위험 요소는 그 구조가 다양하기 때문에 위험 요소를 검출하는 하나의 표준 방법을 수립하기 힘들다. 신선한 과일과 채소는 영양분과 수분이 풍부하기 때문에 박테리아성 병원균 (Salmonella, E. coli O157: H7, Shigella, Listeria monocytogenes, Bacillus cereus), 바이러스 또는 기생충에 의해 쉽게 오염이 되며, 이를 검출하기 위해 주로 다양한 분자 생물학적 기술이 사용되고 있다. 마지막으로 물리적 위험요소인 유리, 금속, 자갈 등과 같은 매개체는 가공 공정 중에 식품에 유입되어 소비자에게 신체적 상해를 줄 수 있다. 이러한 위험요소를 줄이기 위해서 X-선 검사와 같은 투시 시스템을 이용하여 위해물질을 탐지하거나, 생산에 관여하는 직원 교육을 통해 2차 감염을 줄일수 가 있다.
소형선박에서 운영이 가능한 연안용 benthic chamber(BelcI)를 개발했다. 운영상에 유연성이 큰 BelcI는 연안 저층 경계면 연구에 폭넓게 이용될 수 있을 것으로 판단된다. BelcI는 몸체, 자동채수기, 교반기 및 전자제어부로 구성된다. 운영상에 유연성을 극대화하기 위해 몸체는 사각 셀 단위의 2단 구조로 설계했다. 센서신호의 증폭, 교반기 및 채수장치 제어회로를 초 전력 소모 회로로 구성하여 외부 전원장치를 제거했다. PIV(particle image velocimetry)기법으로 측정한 chamber 내부의 유체유통은 전형적인 radial-flow impeller의 특성을 나타냈다. chamber내 물의 혼합 시간은 약 30초로 추정되었으며, 바닥면에서 shear velocity($u^*$)는 약 $0.32\;cm\;s^{-1}$였다. 산경계층(DBL) 두께는 약 $180{\sim}230\;{\mu}m$였다. 현장에서 측정한 산소소모율은 약 $84\;mmol\;O_2\;m^{-2}\;d_{-1}$로 선상배양결과 보다 2배 이상 컸다. 저층 영양염 플럭스는 "질산+아질산"이 $0.18\;{\pm}\;0.07\;mmol\;m^{-2}\;d^{-1}$, 암모니움이 $2.3\;{\pm}\;0.5\;mmol\;m^{-2}\;d^{-1}$, 인산인이 $0.09\;{\pm}\;0.02\;mmol\;m^{-2}\;d^{-1}$, 규산규소가 $23\;{\pm}\;1\;mmol\;m^{-2}\;d^{-1}$로 추정되 었다.
무지개송어(체장 $17.1{\pm}1.0cm$, 체중 $68.4{\pm}2.0g$)의 수온변화에 따른 생리적 반응의 단기적 지표로서 산소소비율, 호흡수, 헤모글로빈 함량 변화 및 내성 상한 온도를 조사하였다. 실험 수온은 $15^{\circ}C$를 중심으로 낮은 온도 쪽으로는 4, 5, 6, 7 및 $10^{\circ}C$, 높은 온도 쪽으로는 17, 20, 23, 26 및 $28^{\circ}C$에서 각각 적응시켜 산소소비량과 호흡수를 측정하였다. 수온의 하강과 상승은 $15^{\circ}C$에서 사육하던 무지개 송어를 1일 $1^{\circ}C$씩 순차 적응시키면서 각 수온에 7일간 적응시켰다. 무지개송어는 수온이 $23^{\circ}C$ 이상이 되면 산소소비율, 호흡수 및 헤모글로빈 함량에 변화를 가져오면서 체내 항상성이 급격하게 낮아지는 것으로 나타났다. 또한 생존 상한수온은 $28^{\circ}C$로 나타났다. 무지개송어가 무리없이 생활할 수있는 온도 범위는 $10{\sim}20^{\circ}C$로서 $10{\sim}15^{\circ}C$의 낮은 온도에서는 낮은 온도쪽으로, $15{\sim}20^{\circ}C$의 높은 온도에서는 높은 온도쪽으로 $5^{\circ}C$ 이상 급격한 변화를 주지 않는 것이 무지개송어의 생리활력에 현저한 변화가 나타나지 않는 것으로 조사되었다.
Anaerobic digestion(AD) has successfully been used for many applications that have conclusively demonstrated its ability to recycle biogenic wastes. AD has been successfully applied in industrial waste water treatment, stabilsation of sewage sludge, landfill management and recycling of biowaste and agricultural wastes as manure, energy crops. During AD, i.e. organic materials are decomposed by anaerobic forming bacteria and fina1ly converted to excellent fertilizer and biogas which is primarily composed of methane(CH4) and carbon dioxide(CO2) with smaller amounts of hydrogen sulfide(H2S) and ammonia(NH3), trace gases such as hydrogen(H2), nitrogen(N2), carbon monoxide(CO), oxygen(O2) and contain dust particles and siloxanes. The production and utilisation of biogas has several environmental advantages such as i)a renewable energy source, ii)reduction the release of methane to the atomsphere, iii)use as a substitute for fossil fuels. In utilisation of biogas, most of biogas produced from small scale plant e.g. farm-scale AD plant are used to provide as energy source for cooking and lighting, in most of the industrialised countries for energy recovery, environmental and safety reasons are used in combined heat and power(CHP) engines or as a supplement to natural. In particular, biogas to use as vehicle fuel or for grid injection there different biogas treatment steps are necessary, it is important to have a high energy content in biogas with biogas purification and upgrading. The energy content of biogas is in direct proportion to the methane content and by removing trace gases and carbon dioxide in the purification and upgrading process the energy content of biogas in increased. The process of purification and upgrading biogas generates new possibilities for its use since it can then replace natural gas, which is used extensively in many countries, However, those technologies add to the costs of biogas production. It is important to have an optimized purification and upgrading process in terms of low energy consumption and high efficiency giving high methane content in the upgraded gas. A number of technologies for purification and upgrading of biogas have been developed to use as a vehicle fuel or grid injection during the passed twenty years, and several technologies exist today and they are continually being improved. The biomethane which is produced from the purification and the upgrading process of biogas has gained increased attention due to rising oil and natural gas prices and increasing targets for renewable fuel quotes in many countries. New plants are continually being built and the number of biomethane plants was around 100 in 2009.
Objective: This study is designed to measure the concentration of DBPs (disinfection by-products) in pool water and in air and to estimate the carcinogenic potential through the evaluation of inhalation exposure. Methods: The subjects were six indoor swimming pools with many users in Gwangju. Samples of pool water and indoor air were taken every one month from August 2018 to August 2019 and analyzed for eight swimming pool standards. Three-liter air samples were collected and the VOCs were analyzed using GC/MS directly connected to thermal desorption. Results: pH was 6.8-7.5 and the concentration of free residual chlorine in pool water was 0.40-0.96 ?/ℓ. Physicochemical test items such as KMnO4 consumption and heavy metal items such as Aluminum met existing pool hygiene standards. No VOC materials were detected except for the DBPs. The concentration of THMs in the pool water was 11.05-41.77 ㎍/L and the THMs mainly consist of Chloroform (63-97%) and BDCM (3-31%). The concentration of indoor air THMs is 13.24-32.48 ㎍/㎥ and consists of Chloroform. The results of carcinogenic assessment of chloroform in the indoor swimming pool via inhalation exposure were 2.0 to 6.4 times higher than the 'acceptable risk level' suggested by the US EPA. Conclusions: The concentration of THMs in the pool water is 11.05-41.77 ㎍/L, most of which is chloroform. In addition, the concentration of indoor air THMs is 13.24-32.48 ㎍/㎥. The result of carcinogenic assessment of chloroform was 2.0 to 6.4 times higher than the 'acceptable risk level' suggested by the US EPA.
시스템 설계의 각 단계에서 저전력 설계기법을 적용하여 8×8+20비트의 MAC을 설계하였다. 알고리듬레벨에서는 MAC의 중요한 명령어 중의 하나인 승/감산연산을 위한 하드웨어의 설계에서 기존의 방식에 비하여 트랜지스터를 감소할 수 있는 새로운 기법을 제안하였으며, 회로 레벨에서는 동일한 로직을 CMOS로 구현한 경우보다 PDP(power-delay-product) 측면에서 우수한 성능을 가지는 NMOS pass-transistor 로직으로 구성된 새로운 Booth 셀렉터 회로를 제안하였다. 구조 레벨에서 최종단 덧셈기는 전력소모, 동작속도, 면적, 설계 규칙성 측면에서 가장 우수한 ELM 덧셈기를 사용하였고, 레지스터는 비트당 트랜지스터의 수가 적은 동적 CMOS 단일모서리 천이 플립플롭을 적용하였다. 동작속도를 높이기 위한 방법으로는 2단 파이프라인 구조를 적용했으며, Wallace 트리 블록에 고속 4:2 압축기를 이용하였다. 0.6㎛ 단일폴리, 삼중금속 CMOS 공정으로 설계된 MAC은 모의실험 결과 곱셈 연산시 최대 200㎒ 3.3V에서 35㎽의 전력을 소모하였고, MAC 연산시 최대 100㎒에서 29㎽의 전력을 소모하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.