• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.197-200
• /
• 2001

In this letter, we report on the investigation of Ni/Si/Ni Ohmic contacts to n-type 4H-SiC. Ohmic contacts have been formed by a vacuum annealing and N$_2$ gas ambient annealing method at 950$^{\circ}C$ for 10 min. The specific contact resistivity($\rho$$\sub$c/), sheet resistance(R$\sub$S/), contact resistance(R$\sub$S/), transfer length(LT) were calculated from resistance(R$\sub$T/) versus contact spacing(d) measurements obtained from 10 TLM(transmission line method) structures. The resulting average values of vacuum annealing sample were $\rho$$\sub$c/=3.8x10$\^$-5/ Ω$\textrm{cm}^2$ , R$\sub$c/=4.9Ω, R$\sub$T/=9.8Ω and L$\sub$T/=15.5$\mu\textrm{m}$, resulting average values of another sample were $\rho$$\sub$c/=2.29x10$\^$-4/ Ω$\textrm{cm}^2$ , R$\sub$c/=12.9Ω, R$\sub$T/=25.8Ω. The Physical properties of contacts were examined using X-Ray Diffraction and Auger analysis, there was a uniform intermixing of the Si and Ni, migration of Ni into the SiC.

• Journal of Powder Materials
• /
• v.5 no.4
• /
• pp.334-339
• /
• 1998

In purpose of introducing the inverse magnetostrictive properties into the structural ceramics, $Al_2O_3$ based nanocomposites dispersed with nano-sized Ni-Co particles were studied. The composites were fabricated by the hydrogen reduction and hot-pressing of $Al_2O_3$ and NiO-CoO mixed powders. The mixtures were prepared by using Ni- and Co-nitrate $(Ni(NO_3)_2\;{\cdot}\;6H_2O\;and\;Co(NO_3)_2\;{\cdot}\6H_2O)$ as source materials for the Ni-Co particles. Microstructural observations revealed that nano-sized Ni-Co particles were dispersed homogeneously at $Al_2O_3$ grain boundaries. High strength above 1 GPa was obtained for the $Al_2O_3/10$ wt% Ni-Co nanocomposite fabricated by a controlled powder preparation process. The inverse magnetostrictive response to applied stress was obtained due to the presence of dispersed Ni-Co particles, which indicates a possibility to incorporate new functions into the structural ceramics without loosing the mechanical properties.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.6
• /
• pp.653-656
• /
• 1997

The new unsymmetric $N_6$ ligand 1-amino-13-(2-pyridyl)-3,6,9,12-tetraazatridecane (aptatd) containing one pyridyl group has been synthesized and characterized by EA, IR, and NMR. Its proton association constants $(log K_H^n)$ and stability constants $(log K_{ML})$ for Co(Ⅱ), Ni(Ⅱ), Cu(Ⅱ), and Zn(Ⅱ) ions were determined at 298.1 K and ionic strength 0.100 mol $dm^{-3}$ (KNO₃) in aqueous solution by potentiometry: log $K_H^1$=8.80, log $K_H^2$=8.49, log $K_H^3$=6.84, log $K_H^4$=4.17, log $K_H^5$=3.47; log $K_{ML}(Co^{2+})$=18.00, log $K_{ML}(Ni^{2+})$=21.31, log $K_{ML}(Cu^{2+})$=23.62, log $K_{ML}(Zn^{2+})$=15.60. The X-ray structure of its nickel(Ⅱ) complex [Ni(aptatd)]$(ClO_4)_2$ are reported: orthorhombic space group Pbca, a=15.715(1) Å, b=14.280(2) Å, c=19.443(2) Å, V=4363.4 (9) ų with Z=8. The geometry around nickel is a distorted octahedron with the pyridine nitrogen atom being cis to the nitrogen atom of the terminal primary amine.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1399-1401
• /
• 2001

We studied on structure and resistivity, temperature coefficient of resistance (TCR) of NiCr and NiCr-N thin resistor films prepared by do reactive magnetron sputtering of NiCr target. It is found that while pure NiCr films are polycrystalline, an addition of nitrogen (N2/(Ar+N2) ratios are between 10% and 70%) into the film is changed into amorphous structure and sheet resistance of films is increased. Measurement temperatures of TCR are ratios of $5^{\circ}C$ per 15min from $25^{\circ}C$ to $130^{\circ}C$. TCR for an as-deposited NiCr-N thin film is varied from positive to negative.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.378-381
• /
• 1996

This study is to research Li$_{x}$Ni$_{2-x}$O$_2$ cathode for lithium chargeable battery. We investigated morphology and cell resistance, capacity and Ah efficiency of Li$_{x}$Ni$_{2-x}$O$_2$/Li cells using Li$_{x}$Ni$_{2-x}$O$_2$ prepared under air and $O_2$ flow. The (003)I/(104)I intensity ratio was 1.4. The cell resistance was increased with increasing Li in Li$_{x}$Ni$_{2-x}$O$_2$. The discharge capacity based on Li$_{x}$Ni$_{2-x}$O$_2$of 1st and 15th cycles was 135㎃h/g and 108㎃h/g, respectively. The Li$_{x}$Ni$_{2-x}$O$_2$ prepared with hexan under $O_2$ flow had a good properties. properties. properties.

• Membrane Journal
• /
• v.22 no.1
• /
• pp.1-7
• /
• 2012

We make a studyof the hydrogen permeability and chemical stability of $Nb_{56}Ti_{23}Ni_{21}$ metal alloy membrane. For this purpose, we produced the $Nb_{56}Ti_{23}Ni_{21}$ membrane which has 10 mm diameter and 0.5 mm thick, and experiment the hydrogen transport properties under two kinds of feed gas ($H_2$ 100%; $H_2$ 60% + $CO_2$ 40%) at $450^{\circ}C$C with variation of absolute pressure.The maximum hydrogen permeation flux was $5.58mL/min/cm^2$ in the absolute pressure 3 bar under pure hydrogen. And each case of feed gases about gas composition, the permeation fluxes were satisfied with Sievert's law, and the hydrogen permeation flux decreased with decrease of hydrogen partial pressure irrespective of temperature and pressure. After permeation test, we experiment the stability and durability of $Nb_{56}Ti_{23}Ni_{21}$ alloy membrane for carbon dioxide by XRD analysis.

• Journal of the Korean Chemical Society
• /
• v.51 no.4
• /
• pp.339-345
• /
• 2007

Urea reacts with PtCl2, H2[PtCl6]·6H2O, H2[IrCl6] and Ni(CH3CO2)2 in aqueous solution at high temperature (60-80 °C) yielding [PtCl2(Urea)]·2H2O (1), (NH4)2[PtCl6] (2), (NH4)2[IrCl6]·H2O (3) and [Ni2(OH)2(NCO)2(H2O)2] (4) complexes, respectively. In complex 1, urea coordinates to Pt(II) as a neutral bidentate ligand via amido nitrogen atoms. In complexes 2, 3 and 4 it seems that the coordinated urea molecules decompose during the reaction at high temperature and a variety of reaction products are obtained. All complexes were isolated in moderate yields as dark green (1), yellow (2), pale brown (3) and faint green (4) precipitates, respectively. The reaction products were characterized by their microanalysis, IR, 1H and 13C NMR spectra as well as thermal analysis. General mechanisms describing the formation of these complexes were suggested.

• Journal of the Korean Ceramic Society
• /
• v.48 no.2
• /
• pp.134-140
• /
• 2011

To study the effect of color development of Ni-doped willemite blue pigments, five batches of compositions were prepared and fired at $1350^{\circ}C$/hold for 1 h. When Ni was substituted for ZnO by 0.03 mole the optimum result were obtained. Then they were fired at $1300^{\circ}C$ and held for 1, 2, 4 and 6 h respectively for the purpose sake. XRD, Raman spectroscopy, FT-IR, UV-vis were used to analyze the results of experiment. The substitution of 0.03mole Ni for Zn was most optimum and which produced good willemite at the temperature of $1300^{\circ}C$, holding for 6 h. In ceramic arts, cobalt has been used for blue coloring, in most cases, despite of its high cost. If the low cost Ni-doped willemite blue pigments supplies for them with stable and multiple shades of blue pigment, using NiO at high temperature, it would provide various blues for ceramic wares.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.167-170
• /
• 2002

The influence of Si surface damage on Ni-silicide with TiN Capping layer and the effect of $H_2$ anneal are characterized. Si surface is intentionally damaged using Ar Sputtering. The sheet resistance of NiSi formed on damaged silicon increased rapidly as Ar sputtering time increased. However, the thermal stability of Ni-Si on the damage silicon was more stable than that on at undamaged Si, which means that damaged region retards the formation of NiSi. It was shown that $H_2$ anneal and TiN capping is highly effective in reducing NiSi sheet resistance.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.1905-1910
• /
• 2008

The reaction of 3,14-dimethyl-2,6,13,17-tetraazatetracyclo[16.4.0$0^{1.18}.0^{7.12}$]docosane ($L^1$) with formaldehyde in warm methanol yielded 3,14-dimethyl-2,6,13,17-tetraazatetracyclo[16.4.$1^{2.6}.0^{1.18}.0^{7.12}$]tricosane ($L^7$) containing one 1,3-diazacyclohexane subunit. In methanol, $L^7$ readily reacts with $Cu^{2+}$ ion to form [$CuL^7(H_2O)$]$^{2+}$ which is extremely inert against methanolysis. In the solution containing $Ni^{2+}$ ion, however, $L^7$ reacts with methanol to yield [$NiL^3$]$^{2+}$ ($L^3$ = 2-(methoxymethyl)-5,16-dimethyl-2,6,13,17-tetraazatricyclo[16.4.$0^{1.18}.0^{7.12}$]- docosane), in which one N-$CH_2OCH_3$ pendant arm is appended. The copper(II) complex [$CuL^7(H_2O)$]- $(ClO_4)_2{\cdot}3H_2O\;(I{\cdot}3H_2O)$ has a severely distorted trigonal bipyramidal coordination geometry with a 4-5- 6-5 chelate ring sequence. The crystal structure of [$NiL^3$]$(PF_6)_2{\cdot}2H_2O$ (IIb) shows that the N-$CH_2OCH_3$ pendant arm is not coordinated to the metal ion in the solid state. In various solvents (S), however, the nickel(II) complex exists as a mixture of [$NiL^3$(S)]$^{2+}$, in which the N-$CH_2OCH_3$ group as well as S is coordinated to the metal ion, and [$NiL^3$]^{2+}.