• 자원환경지질
• /
• 제32권6호
• /
• pp.611-631
• /
• 1999

Enviromental geochemisty and heary metal contamination at the Kongjueil mine creek were underaken on the basis of physicohemical properties and mineralogy for various kinds of water (surface, mine and ground water),soil, precipitate and sediment collected of April and December in 1998. Hydrgeochemical composition of the water samples are characterized by relatively significant enricant of Ca+Na, alkiali ions $NO_3$ and Cl inground and surfore water, wheras the mine waters are relatively eneripheral water of the mining creek have the characteristics of the (Ca+Mg)-$(HCO_3+SO_4)$type. The pH of the mine water is high acidity (3.24)and high EC (613$\mu$S/cm)compared with those of surface and ground water. The range of $\delta$D and $\delta^{18}O$ values (relative to SMOW) in the waters are shpwn in -50.2 to -61.6% and -7.0 to -8.6$\textperthousand$(d value=5.8 to 8.7). Using computer program, saturation index of albite, calcite, dolomite in mine water are nearly saturated. The gibbiste, kaolinite and smectite are superaturated in the surface and ground water, respectively. Calculated water-mineral reaction and stabilities suggest that weathing of silicate minerals may be stable kaolinite owing to the continuous water-rock reaction. Geochemical modeling showed that mostly toxic heavy metals may exist larfely in the from of metal-sulfate $(MSO_4\;^2)$and free metal $(M^{2+})$ in nmine water. These metals in the ground and surface water could be formed of $CO_3$ and OH complex ions. The average enrichment indices of water samples are 2.72 of the groundwater, 2.26 of the surface water and 14.15 of the acid mine water, normalizing by surface water composition at the non-mining creek, repectively. Characteristics of some major, minor and rate earth elements (Al/Na, K/Na, V/Ni, Cr/V, Ni/Co, La/Ce, Th/Yb, $La_N/Yb_N$, Co/Th, La/Sc and Sc/Th) in soil and sediment are revealed a narrow range and homogeneous compositions may be explained by acidic to intermediate igneous rocks. And these suggested that sediment source of host granitic gneiss colud be due to rocks of high grade metamorphism originated by sedimentary rocks. Maximum concentrations of environmentally toxic elements in sediment and soil are Fe=53.80 wt.% As=660, Cd=4, Cr=175, Cu=158, Mn=1010, Pb=2933, Sb=4 and Zn=3740 ppm, and extremely high concentrations are found are found in the subsurface soil near the ore dump and precipitates. Normalizing by composition of host granitic gneiss, the average enerichment indices are 3.72 of the sediments, 3.48 of the soils, 10.40 of the precipitates of acid mine drainage and 6.25 of the soils near the main adit. The level of enerichment was very severe in mining drainage sediments, while it was not so great in the soils. mineral composition of soil and sediment near the mining area were partly variable being composed of quartz, mica, feldspar, chlorite, vermiculite, bethierin and clay minerals. reddish variable being composed of quartz, mica, feldspar, chlorite, vermiculite, bethierin and clay minerals. Reddish brown precipitation mineral in the acid mine drainage identifies by schwertmanite. From the separated mineralgy, soil and sediment are composed of some pyrite, arsenopyite, chalcopyrite, sphalerite, galena, malachite, goethite and various kinds of hydroxied minerals.

• 한국산업보건학회지
• /
• 제24권4호
• /
• pp.547-555
• /
• 2014

Objective: This study was conducted to investigate the association between subjective distress symptoms and argon welding among workers in Gyeongnam Province shipyard. Method: 31 argon and 29 non-argon welding workers were selected as study subjects in order to measure concentrations of personal dust, welding fumes and other hazardous materials such as ZnO, Pb, Cr, FeO, MnO, Cu, Ni, $TiO_2$, MgO, NO, $NO_2$, $O_3$, $O_2$, $CO_2$, CO and Ar. An interviewer-administered questionnaire survey was also performed on the same subjects. The items queried were as follows: age, height, weight, working duration, welding time, welding rod amounts used, drinking, smoking, and rate of subjective distress symptoms including headache and other symptoms such as fever, vomiting and nausea, metal fume fever, dizziness, tingling sensations, difficulty in breathing, memory loss, sleep disorders, emotional disturbance, hearing loss, hand tremors, visual impairment, neural abnormality, allergic reaction, runny nose and stuffiness, rhinitis, and suffocation. Statistical analysis was performed using SPSS software, version 18. Data are expressed as the mean ${\pm}SD$. An ${\chi}^2$-test and a normality test using a Shapiro wilk test were performed for the above variables. Logistic regression analysis was also conducted to identify the factors that affect the total score for subjective distress symptoms. Result: An association was shown between welding type (argon or non-argon welding) and the total score for subjective distress symptoms. Among the rate of complaining of subjective distress symptoms, vomiting and nausea, difficulty breathing, and allergic reactions were all significantly higher in the argon welding group. Only the concentration of dust and welding fumes was shown to be distributed normally after natural log transformation. According to logistic regression analysis, the correlations of working duration and welding type (argon or non-argon) between the total score of subjective distress symptoms were found to be statistically significant (p=0.041, p=0.049, respectively). Conclusion: Our results suggest that argon welding could cause subjective distress symptoms in shipyard workers.

• Applied Microscopy
• /
• 제45권2호
• /
• pp.95-100
• /
• 2015

The in-situ heating transmission electron microscopy experiment allows us to observe the time- and temperature-dependent dynamic processes in nanoscale materials by examining the same specimen. The temperature, which is a major experimental parameter, must be measured accurately during in-situ heating experiments. Therefore, calibrating the thermocouple readout of the heating holder prior to the experiment is essential. The calibration can be performed using reference materials whose phase-transformation (melting, oxidation, reduction, etc.) temperatures are well-established. In this study, the calibration experiment was performed with four reference materials, i.e., pure Sn, Al-95 wt%Zn eutectic alloy, NiO/carbon nanotube composite, and pure Al, and the calibration curve and formula were obtained. The thermocouple readout of the holder used in this study provided a reliable temperature value with a relative error of <4%.

• Bulletin of the Korean Chemical Society
• /
• 제15권8호
• /
• pp.673-679
• /
• 1994

$^1H$ NMR spectra of imidazole, 2-and 4(5)-methylimidazole, histamine, L-histidine, L-histidine methyl ester, N${\alpha}$-acetyl-L-histidine, and L-carnosine coordinated to the paramagnetic undecatungstocobalto(II)silicate ($SiW_{11}Co$) and undecatungstonickelo(II)silicate ($SiW_{11}Ni$) anions are reported. For these complexes the ligand exchange is slow on the NMR time scale and the pure resonance lines of the free ligand and the complexes have been observed separately at room temperature. Two different complexes are formed, depending upon which nitrogen atom of the imidazole ring is coordinated to the cobalt or nickel ion of $SiW_{11}M$. Thus the NMR spectrum of a $D_2O$ solution containing a ligand and $SiW_{11}M$ consists of three sets of lines originating from the free ligand and two complexes. All NMR lines of the $SiW_{11}Co$ complexes have been assigned unequivocally using the saturation transfer technique. The temperature dependence of some spectra are also reported. The NMR spectra of some complexes show that the internal rotation of the substituent on the imidazole ring is hampered by the heteropolyanion moiety even at room temperature.

• 한국전기전자재료학회논문지
• /
• 제21권12호
• /
• pp.1077-1082
• /
• 2008

To fabricate a multi-layered piezoelectrics/electrodes structure, the piezoelectrics should be sintered at the temperature lower than $950^{\circ}C$ to use the silver electrode, which is cheaper than the electrodes containing noble metals such as Pd and Pt. Therefore, in this study, we modified the composition of $Pb(Zr,Ti)O_3$-based material as $(Pb_{0.98}Cd_{0.02})(Ni_{1/3}Nb_{2/3})_{0.25}Zr_{0.35}Ti_{0.4}O_3$ to lower the sintering temperature and to improve the piezoelectric properties. Small amount of $MnCO_3$, $SiO_2$, and $Pb_3O_4$ were also added to lower the sintering temperature of the ceramic. The prepared raw powders were mixed by using a ball mill for 24 hours. And then the mixed powders were calcinated for 2 hours at $800^{\circ}C$. The calcinated powders were again crushed with the ball mill for 72 hours. The final powders were pressed for making the shape of ${\emptyset}15\;mm$ disk. The disk-type samples were sintered at temperature range of $850{\sim}950^{\circ}C$. The crystal phases of the sintered specimens were perovskite structure without secondary phases. All of the measured electrical properties such as electromechanical coupling coefficients ($k_p$), mechanical quality factors ($Q_m$), and piezoelectric charge constants ($d_{33}$) were decreased with decreasing the sintering temperatures. The electrical properties measured at the sample sintered at $950^{\circ}C$ were 54% of $k_p$, 503 of $Q_m$, and 390 pC/N of $d_{33}$, respectively. These properties were considered to be fairly good for the application of multi-layered piezoelectric generators or actuators.

• 자원리싸이클링
• /
• 제30권6호
• /
• pp.43-52
• /
• 2021

본 연구에서는 Taguchi method을 사용하여 폐 배터리 셀 분말(LiNi_xCo_yMn_zO₂, LiCoO₂)으로부터 선택적 리튬 침출을 위한 최적의 질산염화 공정에 대한 연구를 진행했다. 질산염화 공정은 질산 침출 및 배소를 통해 질산리튬을 제외한 질산 화합물을 산화물로 변환하여 선택적 리튬 침출을 하는 공정이다. 따라서 전처리 온도, 질산 농도, 질산 침적 양, 배소 온도에 대하여 Taguchi method를 적용하여 인자가 미치는 영향에 대한 분석을 실시하였다. L₁₆(4⁴)직교 배열표를 사용하여 실험하였으며, 신호 대 잡음비(S/N) 및 분산 분석(ANOVA)을 분석하였다. 그 결과 배소 온도가 가장 크게 영향을 미쳤으며 질산 농도, 전처리 온도, 질산 사용량 순으로 영향을 미쳤다. 각 인자에 대해 세부적인 실험을 진행한 결과 전처리 700℃에서 10시간, 10 M 질산 2 ml/g 침출, 275℃ 배소 10시간이 적절하였다. 그 결과 80% 이상의 리튬을 침출을 확인하였다. 400℃ 이상 배소 시 급격하게 리튬 침출율이 감소원인 분석을 위해 질산리튬과 질산 화합물을 배소 후 D.I water에서 침출하지 잔류물에 대해 XRD 분석을 진행하였다. 분석 결과 질산리튬과 질산망간과 400℃ 이상의 온도에서 리튬 망간 옥사이드의 형성하며 D.I water에서 침출하지 않음을 확인하였다. 질산염화 공정 시 침출된 용액을 고액분리 후 증발농축하여 XRD 분석한 결과 LiNO₃의 회수를 확인하였다.

• 전자공학회논문지A
• /
• 제28A권12호
• /
• pp.31-38
• /
• 1991

The current-voltage characteristics at annealed Be-Cu alloy(1.8-2 wt% Be, 0.2 wt% Co+Ni) interfaces have been studied by means of the cyclic voltammetric method. The specimens were annealed in nitrogen gas($N_{2}$) furnace at 36$0^{\circ}C$ for 1.5 hours. After annealing, the vickers hardness(HV) was increased from 210 to 385. The used solutions were distilled water(H$_{2}$O), 10$^{-3}M\;CsNO_{2},10^{-2}M\;KCl,10^{-2}M\;KOH,10^{-4}M\;H_{2}SO_{4}$ aqueous electrolytes, and ethylalcohol ($C_{2}H_{5}OH$), etc. The cyclic voltammograms showed significant current-voltage characteristics between the annealed and unannealed specimens at the same conditions. The age hardening and the related surface potential barrer and dissolution effects have been observed during the whole experimental process. The dissolution process of annealed Be-Cu alloys was effectively retarded by the age hardening phenomenon. The age hardening effect also raised the surface potential barrier of Be-Cu alloys. The interfacial phenomena of Be-Cu alloys seem to be one of good models for understanding the activation process.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.646-650
• /
• 2012

Multifunctional structures with two kinds of materials have been intensively investigated in order to improve their electrical characteristic with two functions simultaneously. However, the research regarding of multifunctional ceramic sensor is still in a preliminary stage and how to integrate them with low-cost and high-yield mass production process remains a challenge issue. In this study, we fabricated the multifunctional ceramic sensor composed of temperature and gas sensors. Moreover, we investigated the CO sensing properties of three dimensional nanostuctured $Nb_2O_5$ thin film gas sensors fabricated with silica ($SiO_2$ nanosphere (${\O}$= 750 nm). Compared to plain films, the nanostructured films show enhanced gas sensing of greater sensitivity and a faster response. This result reveals that significantly increased sensitivity is an increase in the effective surface area for the adsorption of gas molecules.

• 한국진공학회지
• /
• 제15권4호
• /
• pp.427-433
• /
• 2006

자발적인 미세상 분리에 의해 실린더형의 규칙적인 배열을 형성하는 고분자 공중합체와 알루미늄의 양극산화에 의해 실린더형 기공 배열이 형성되는 알루미나 템플레이트를 이용하여 다양한 물질의 나노점 배열을 형성하였다. 펄스형 레이저 기상 증착법을 이용하여 은, 니켈, 산화아연, 실리콘, 코발트 / 백금 나노점 배열을 얻었는데, 나노점의 크기와 배열은 템플레이트의 기공 크기와 배열을 보여주었다. 이러한 템플레이트 기법을 이용하면 나노점의 밀도는 고 분자 공중합체와 알루미나의 경우 각각 $6{\times}10^{11}/cm^2$ 와 $1{\times}10^{10}/cm^2$ 이다. 이중 에르븀이 도핑된 실리콘 나노점과 ZnO 나노점 배열은 PL 측정을 통하여 물질의 광학성질에 관해 알아보았다. 에르븀이 도핑된 실리콘 나노점 배열은 $1.54{\mu}m$에서 강한 빛을 내며 ZnO 나노점 배열은 380 nm 에서 강한 PL 세기를 나타낸다.

• 청정기술
• /
• 제20권3호
• /
• pp.269-276
• /
• 2014

본 연구는 수은연속측정시스템의 가장 중요한 구성 요소의 하나인 산화수은을 원소수은으로 환원시킬 수 있는 건식 환원촉매시스템 개발을 목적으로 수행되었다. 산화-환원 표준전위를 기준으로 산화수은의 원소수은으로의 환원반응을 자발적으로 일으킬 수 있는 촉매 대상물질로 Fe, Cu, Ni 및 Co 4종류의 전이금속이 선택되었다. 이들 전이금속 촉매들은 산소가 없는 반응가스 조성에서 산화수은의 원소수은으로의 환원반응에 대해 높은 활성을 보였다. 그러나 산소가 존재하는 경우 환원 활성이 크게 감소하는데 이는 산소에 의해 해당 전이금속이 산화수은 환원 활성이 낮은 전이금속산화물로 변환되기 때문이다. 반응가스에 산소가 존재하여도 수소를 공급하면 산화수은 환원 활성이 크게 증가되는데 이는 산화수은의 환원반응이 진행되는 고온에서 산소와 수소 사이의 연소반응에 의해 산소가 소모되기 때문으로 확인되었다. Fe를 환원촉매로 하고 배기가스에 수소를 공급하는 산화수은 환원촉매시스템은 $SnCl_2$ 수용액을 사용하는 습식화학 환원기술에 필적할 수준의 활성을 나타내기 때문에 상업적으로 적용 가능한 산화수은 환원시스템으로 기대된다.