• 한국세라믹학회지
• /
• 제24권6호
• /
• pp.579-585
• /
• 1987

The effects of flux KCl and dopant Nb2O5 on the PTCR characteristics of BaTiO3 prepared by molten salt synthesis method have been investigated. As the amount of dopant Nb2O5 is over the solubility limit in BaTiO3, the room-temperature resistivity increases, and the PTCR effect and the grain size decrease. The variation of the amount of flux KCl slightly influences on the room-temperature resistivity, PTCR effect and grain size in Nb2O5 doped BaTiO3, but BaTiO3 ceramics prepared by the method of molten salt synthesis show larger PTCR effect than those of conventional calcining of mixed oxides.

• Bulletin of the Korean Chemical Society
• /
• 제27권6호
• /
• pp.853-856
• /
• 2006

Dion-Jacobson phases $CsCa_2Nb_2FeO_9$ and $CsCa_2Nb_2AlO_9$ were reinvestigated by the Rietveld analysis of powder X-ray diffraction (XRD) method, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). These nominal compounds, previously known as the oxygen-deficient layered perovskites with the sequences of $NbO_6-MO_4-NbO_6$ in tripled slab, in fact, were mixed phases of n = 3 Dion-Jacobson phases and impurities such as $Ca_2NbFeO_6$ and $Ca_3Al_2O_6$. The difference of morphology and chemical in-homogeneity between Dion-Jacobson phases and impurities could be clearly identified by scanning electron microscopy with energy-dispersive X-ray spectroscopy. The chemical composition of $CsCa_2Nb_2FeO_9$ was calculated into $Cs_{0.59}Ca_{2.64}Nb_{2.92}Fe_{0.81}$ in small agglomerate crystals and $Cs_{0.95}Ca_{1.97}Nb_{3.08}Fe_{0.15}$ in long plate-like crystals.

• 한국결정학회지
• /
• 제17권1호
• /
• pp.24-32
• /
• 2006

[ $Zn_3Nb_2O_8$ ]세라믹스에 액상소결제인 $V_2O_5$를 첨가하여 소결하여 고주파 대역에서의 유전특성의 변화를 조사하였다. $1100^{\circ}C$에서 2시간 하소한 결과 $Zn_3Nb_2O_8$를 합성할 수 있었고, $V_2O_5$를 첨가하여 소결한 $Zn_3Nb_2O_8$에서 $V_2O_5$의 mole%증가와 소결온도의 증가에 따라 상대밀도 95%의 소결특성을 확인 하였다. 유전율 특성은 $V_2O_5$ mole ratio가 $2{\sim}4%$의 시편에서 모두 ${\varepsilon}_r\;21$ 이상으로 증가됨을 확인하였고, 품질계수는 $900^{\circ}C$에서 소결한 $V_2O_5$ 2 mole% 시편에서 $Q{\times}f=40,000$을 나타내었다. 온도계수는 $900^{\circ}C$ 소결하고 $V_2O_5$ 1 mole% 첨가한 경우 0에 제일 가까운 $T_{cf}=-54ppm/^{\circ}C$를 나타내었고, 다른 보건에서는 $T_{cf}=-60{\sim}-80ppm/^{\circ}C$의 값을 나타내었다.

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.639-644
• /
• 1988

The physical and dielectric properties of complex perovskite compound Sr(Mg1/3Nb1/3)O3-Ba(Mg1/3Nb2/3)O3-Ba(Mg1/3Ta2/3)O3(BMT) system were investigated as a function of composition. As the mole ratio of BMN was increased, lattice parameter ratio c/a was slightly increased, and density was increased in SMN-BMN system. However, in BMN-BMT system, lattice parameter ratio c/a and density were decreased with increasing the mole ratio of BMN. Dielectric constant, dielectric loss at $25^{\circ}C$ and 100kHz, and temperature coefficient of resonant frequency, the dependence of temperature in capacitance were increased with increasing the mole ratio of BMN in SMN-BMN-BMT system. These result can be explained according to the degree of order=disorder and dielectric constant.

• 대한전기학회논문지
• /
• 제44권5호
• /
• pp.644-648
• /
• 1995

Transparent xBa(La$_{1}$2/Nb$_{1}$2/)O$_{3}$-(1-x)Pb(Zr, Ti)O$_{3}$ (x=8.5, 9.0[mol.%], Zr/Ti=70/30~40/60) ceramics were fabricated by the two-stage sintering method, the electrooptic properties were investigated with Ba(La$_{1}$2/Nb$_{1}$2/)O$_{3}$ content and Zr/Ti composition ratio. Decreasing the Zr/Ti ratio, the electrooptic property was changed from a quadratic electrooptic effect to a linear electrooptic effcet. In the BLN-PZT 9.0/50/50 specimen having the tetragonal structure, the linear electrooptic coefficient had the highest value of 6.01*10$^{-10}$ [m/V] and in the BLN-PZT 9.0/55/45 specimen which located near the MPB region, the quadratic electrooptic coefficient had the highest value of 10.53*10$^{-16}$ [m$^{2}$/V$^{2}$].

• 한국세라믹학회지
• /
• 제39권10호
• /
• pp.977-980
• /
• 2002

Micro-pulling down법을 이용하여 $Nd_2O_3$가 첨가된 crack 등의 결함이 없는 화학양론조성의 $LiNbO_3$ 단결정을 직경 1 mm, 길이 30∼35 mm의 크기로 성장시켰다. Electron probe micro analysis를 이용하여 결정 내에 $Nd_2O_3$가 균일하게 분포되어있음을 확인하였다. 성장된 결정의 $Nd_2O_3$ 첨가에 따른 흡수 band를 관찰하였고 $Nd_2O_3$ 첨가량 변화에 따른 형광특성의 변화를 측정하였다.

• 대한전기학회논문지
• /
• 제44권8호
• /
• pp.1068-1074
• /
• 1995

Effect of (Zn$_{1}$3/Nb$_{2}$3/) $O_{2}$ addition on the phase changes and microwave dielectric properties of BaTi $O_{3}$-3Ti $O_{2}$ ceramics were investigated. Addition of (Zn$_{1}$3/Nb$_{2}$3/) $O_{2}$ to BaTi $O_{3}$-3Ti $O_{2}$ resulted in the formation of Ba $Ti_{4}$$O_{9}$, $Ba_{2}$ $Ti_{9}$ $O_{20}$, Ba(Zn$_{1}$3/Nb$_{2}$3/) $O_{3}$, and Ti $O_{2}$ phases. Ba $Ti_{4}$$O_{9}$ phase was gradually transformed to $Ba_{2}$ $Ti_{9}$ $O_{20}$. This was identified by XRD and microstructure. As the Ba $Ti_{4}$$O_{9}$ phase transformed to $Ba_{2}$ $Ti_{9}$ $O_{20}$ phase, the dielectric constant increased to 37.5. Q*f$_{o}$ value was 40000 at x=0.04, and the temperature coefficient of resonant frequency was +10ppm/.deg. C.C.. C.C.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.272-275
• /
• 2000

Starting from the stoichiometric composition of $K_2$CO$_3$: Li$_2$CO$_3$: Nb$_2$O$_5$=3 : 2 : 5 with the mole ratio, $K_3$LiNb$_6$O$_17$ 17/ single crystals were grown using the Czochralski method. Although the starting melt composition corresponds to the $K_3$Li$_2$Nb$_5$O$_15$ crystals, the chemical composition of the as grown crystals appears to be $K_2.95$Li$_1.33$Nb$_6.17$O$_17$ or $K_2.60$Li$_1.17$Nb$_{5.44}$ 5.44/O$_{15}$ which relatively contain fewer Li ions than $K_3$Li$_2$Nb$_5$O$_15$ crystals. We investigated the influence of the deficiency of the Li ions in the tetragonal tungsten bronze structure through the measurements of DE loop, temperature dependent dielectric constant, differential thermal analysis and temperature dependent X-ray diffraction pattern.

• 한국결정성장학회지
• /
• 제6권2호
• /
• pp.121-128
• /
• 1996

Floating zone법으로 $LiNbO_3$ 단결정올 육성하는데 있어서 원료분말 합성과 원료봉 소결 과정의 최척의 조건을 설험적으로 조사하였다. 원료분말 합성사 낮은 고상반응 온도(700, $800^{\circ}C$)에서는 미량의 $Li_2CO_3$와 $Nb_2O_5$가 미반응상태로 남아있고, 고상반응 온도가 높을 때 ($1000^{\circ}C$)에는 입자성장이 일어나 후속공정인 원료봉 소결에 악영향을 미침이 확인되었다. $950^{\circ}C$에서 12시간 고상반응시킨 원료분말이 $LiNbO_3$의 결정상을 가지면서 미세한 결정립 크기와 균일한 크기분포를 보여 $950^{\circ}C$, 12시간이 최적의 원료분말 합성조건이었다. 원료봉 소결시 소 결온도가 높아질수록, 또 소결시간이 늘어날수록 치밀도가 증가하고 업자성장 양상이 급격히 증가함을 알 수 었었다. $1100^{\circ}C$에서 2시간 동안 소결한 원료봉이 치밀하고, 작은 결정립 크기 와 균얼한 크기분포를 나타내어 floating zone법에 의한 $LiNbO_3$ 단결정성장에 가장 적합한 최적 의 소결 조건은 $1100^{\circ}C$, 2시간엄이 확인되었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.222-224
• /
• 1989

A new fabrication method of proton-diffused LiNbO3 channel waveguides with self-aligned SiO2-Cladding structures are reported, which provides easy control of mode pattern shapes and sizes.