• 광물과 암석
• /
• 제33권2호
• /
• pp.115-127
• /
• 2020

운산 금 광상은 한반도의 3대(대유동 광상, 광양 광상) 금 광상중의 하나이었다. 이 광상 주변지질은 선캠브리아기의 변성퇴적암류와 중생대의 반상화강암으로 구성된다. 이 광상은 선캠브리아기의 변성퇴적암류와 중생대의 반상화강암내에 발달된 단층대를 따라 충진한 함 금 석영맥 광상으로 조산형 금 광상에 해당된다. 이 광상의 석영맥은 광물조합에 따라 1)방연석-석영맥형, 2)자류철석-석영맥형, 3)황철석-석영맥형, 4)페크마틱 석영맥형, 5)백운모-석영맥형 및 6)단순석영맥형으로 분류된다. 연구된 석영맥은 황철석-석영맥형이며 견운모화작용, 녹니석화작용 및 규화작용이 관찰된다. 이 석영맥은 백색 석영, 백색 운모, 녹니석, 황철석, 금홍석, 방해석, 모나자이트, 저어콘 및 인회석 등이 산출된다. 금홍석은 엽리상 석영맥내 유색대에서 자형내지 중립질 입단으로 어두운 금홍석과 밝은 금홍석으로 산출된다. 금홍석의 화학조성은 89.69~98.71 wt.% (TiO₂), 0.25~7.04 wt.% (WO₃), 0.30~2.56 wt.% (FeO), 0.00~1.71 wt.% (Nb₂O₅), 0.17~0.35 wt.% (HfO₂), 0.00~0.30 wt.% (V₂O₃), 0.00~0.35 wt.% (Cr₂O₃) 및 0.04~0.25 wt.% (Al₂O₃)으로 밝은 금홍석이 어두운 금홍석보다 WO₃, Nb₂O₅ 및 FeO 원소들의 함량이 높게 산출되며 서로 다른 시기에 형성된 것으로 생각된다. 어두운 금홍석과 밝은 금홍석내 미량원소들은 어두운 금홍석 [(V³⁺, Cr³⁺) + (Nb⁵⁺, Sb⁵⁺) ↔ 2Ti⁴⁺, 4Cr³⁺ (or 2W⁶⁺) ↔ 3Ti⁴⁺ (W⁶⁺ ↔ 2Cr³⁺), V⁴⁺ ↔ Ti⁴⁺], 밝은 금홍석 [2Fe³⁺ + W⁶⁺ ↔ 3Ti⁴⁺, 3Fe²⁺ + W⁶⁺ ↔ Ti⁴⁺ + (V³⁺, Al³⁺, Cr³⁺) +Nb⁵⁺]로써 치환관계가 있었다. 이들 자료를 근거로, 어두운 금홍석은 광역변성작용 동안 모암광물들의 변질 시 광물내 존재했던 V³⁺, V⁴⁺, Cr³⁺, Nb⁵⁺, Sb⁵⁺, W⁶⁺과 같은 양이온들의 재 농집에 의해 형성되었으나 밝은 금홍석은 ductile shear 시 높은 함량의 Fe²⁺ 및 W⁶⁺ 양이온들을 함유한 열수용액의 유입에 따른 어두운 금홍석과 반응에 의해 어두운 금홍석에 존재하였던 V³⁺, V⁴⁺, Al³⁺, Cr³⁺ 및 Nb⁵⁺과 같은 양이온들의 재 농집에 의해 형성된 것으로 생각된다.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2021-2025
• /
• 2010

Electrical and structural properties were investigated on the effects of ZnO and the lead-free NKN-LST ceramics with the addition of ZnO were fabricated by a conventional mixed oxide method. A gradual change in the crystal and microstructure was observed with the increase of ZnO addition. For the NKN-LST-ZnO ceramics sintered at $1050^{\circ}C$, bulk density increased with the addition of ZnO and showed maximum value at addition 2.0mol% of ZnO. Curie temperature of the NKN-LST-ZnO ceramics slightly decreased with adding ZnO. The dielectric constant, piezoelectric constant ($d_{33}$) and electromechanical coupling factor ($k_p$) increased at the small amount of ZnO addition, which might be due to the increase in density. The high piezoelectric properties = 153 pC/N, electromechanical coupling factor = 0.484 and dielectric constant = 2883 were obtained for the NKN-LST+0.5ZnO ceramics sintered at $1050^{\circ}C$ for 2h.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.276-279
• /
• 2000

Ferroelectric properties of $SrBi_2TaNbO_9$ (SBTN) thin films were changed by the amount of Bi content in SBTN. We suggested that the addition of excess Bi into the films could be accomplished by heat-treating $SBTN/Bi_2O_3/SBTN$ heterostructure fabricated by r.f. magnetron sputtering method. Excess Bi composition was controlled by the thickness of the sandwiched $Bi_2O_3$ from 0 to $400\;\AA$. When the SBTN thin films were inserted by $400\;{\AA}\;Bi_2O_3$ layer, $Bi_2Pt$ phase was formed as a second phase in SBTN films, resulting in poor ferroelectric properties. The onset temperature for hysteresis loop can be reduced by heat treating $SBTN/Bi_2O_3/SBTN$ heterostructure. The films with $SBTN/Bi_2O_3(100\;{\AA})/SBTN$ hetero-structure followed by annealing at $650^{\circ}C$ for 30 min show 2Pr and Ec of $5.66\;{\mu}C/\textrm{cm}^2$ and 54 kV/cm, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.563-566
• /
• 2000

The effect of CuO and CuO-B $i_2$ $O_3$ additives on microwave dielectric properties of (P $b_{0.45}$C $a_{0.55}$)[F $e_{0.5}$N $b_{0.5}$)$_{0.9}$S $n_{0.1}$] $O_3$were investigated to decrease the sintering temperature for usage of Low Temperature Co-firing Ceramics (LTCC). The (P $b_{0.45}$C $a_{0.55}$)[F $e_{0.5}$N $b_{0.5}$)$_{0.9}$S $n_{0.1}$] $O_3$ceramics was sintered at 11$65^{\circ}C$. In order to decrease the sintering temperature, CuO and Cuo-B $i_2$ $O_3$ were added in the (Pb,Ca)[(Fe,Nb)Sn] $O_3$ with CuO-B $i_2$ $O_3$. For the addition of 0.4 wt.% CuO, the sintered density and the dielectric constant of the ceramics were revealed the maximum values of the 6.06g/c $m^2$ and 83 respectively and temperature coefficient of resonance frequency ($\tau$$_{f}$) shifted to the positive value. As increasing B $i_2$ $O_3$to the (Pb,Ca)[(Fe,Nb)Sn] $O_3$ with CuO-B $i_2$ $O_3$with 0.2 wt.% CuO, the sintered density, the $\varepsilon$$_{r}$ and the Q was decreased, and $\tau$$_{f}$ was minimized at 0.2 wt.% CuO, and 0.2 wt.% B $i_2$ $O_3$. For this composition, dielectric properties were $\varepsilon$$_{r}$ of 81, Q. $f_{0}$ of 4400 GHz, and $\tau$$_{f}$ of 5 ppm/$^{\circ}C$ at sintering temperature of 100$0^{\circ}C$. the relationship between the microstructure and properties of ceramics was studied by X-ray diffraction(XRD), scanning electron microscopy(SEM).copy(SEM).oscopy(SEM).copy(SEM).EM).

• 한국결정학회지
• /
• 제1권1호
• /
• pp.1-7
• /
• 1990

Incommensurate 구조에 기인한 회절점들의 체계적인 소멸칙 (extinction rule)의 분석을 통하여 Ba2NaNb5O15(BSN)에 나타나는 incommensurate상의 대칭성이 4차원 초공간군(superspace group) C에 속함을 알 수 있었다. Lock-in superstructure의 공간군은 Ima2(C초)임을 밝혀 내었으며, 그리고 BSH에서의 incommensurate상의 원인을 간략하게 논술하였다. 특히 HREM이 미지를 통하여 discommensuration이 존재함을 확인하였다. 덧붙여, BS각의 구조상 전이에 대하여 군론적 해석을 제시하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.193-195
• /
• 2005

[ $0.96[Bi_{0.5}(Na_{0.84}K_{0.16})_{0.5}TiO_3]+0.04SrTiO_3+0.3wt%Nb_2O_5+0.2wt%La_2O_3+xwt%ZnO$ ], were studied in order to develope the superior piezoelectric properties of Lead-free piezoelectric ceramics. With increasing amount of ZnO addition, density showed the maximum value of 5.79(g/$cm^3$) at 0wt% ZnO addition, and electromechanical coupling factor($k_p$) and dielectric constant decreased, and mechanical quality factor($Q_m$) increased and showed the maximum value of 280 at 0.4wt% ZnO addition.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.30-30
• /
• 2008

Lead-free piezoelectric ceramics 0.97$(Na_{0.5}K_{0.5})NbO_3$-0.03Ba$(Ti_{1-x}Sn_x)O_3$ [NKN-BTS-x] ceramics doped with 1 mol% $MnO_2$ have been fabricated by a sintering technique with muffling. The $MnO_2$-doped NKN-BTS-x ceramics with x$\leq$0.2 have pure orthorhombic perovskite structure at room temperature. The dense microstructure was developed with grain growth as an increase of amount of Sn. Moreover, the addition of Sn was found to have a significant influence on piezoelectric properties. In particular, the $MnO_2$-doped NKN-BTS-0.1 ceramics showed improved piezoelectric properties of piezoelectric constant ($d_{33}$=145pC/N), relatively large electromechanical coupling factor ($k_p$=43%), dielectic constant (${\varepsilon}^T_{33}/{\varepsilon}_0$=676) dielectric loss (tan$\delta$=1.3%).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술회의 초록집
• /
• pp.5-5
• /
• 2010

$(Na_{0.5}K_{0.5})NbO_3$ (NKN) ceramic with 1.5 mol% CuO added (NKNC) was well sintered even at a low temperature of $900^{\circ}C$ with the addition of ZnO. Most of the ZnO reacted with the CuO and formed the liquid phase that assisted the densification of the specimens at $900^{\circ}C$. A few $Zn^{2+}$ ions entered the matrix of the specimens and increased the coercive field ($E_c$) and $Q_m$ values of the specimens. High-piezoelectric properties of $k_p=0.37$, $Q_m=755$, and ${\varepsilon}_3\;^T/{\varepsilon}_0=327$ were obtained from the NKNC ceramics containing 1.0 mol% ZnO sintered at $900^{\circ}C$ for 2 h.

• Transactions on Electrical and Electronic Materials
• /
• 제11권3호
• /
• pp.126-129
• /
• 2010

(1-X) $(Na_{0.5}K_{0.5})NbO_3-X$ $K_4CuNb_8O_{23}$ (NKN-X KCN) ceramics were produced using the conventional solid state sintering method, and their sinterability and electric properties were investigated. The density, dielectric constant (${\varepsilon}_r$), piezoelectric constant $d_{33}$, electromechanical coupling factor $k_p$ and mechanical quality factor $Q_m$ value of the NKN ceramics depended upon the KCN content and the sintering temperature. In particular, the KCN addition to the NKN greatly improved the mechanical quality factor $Q_m$ value. The ceramic with X = 2.0 mol% sintered at $1,150^{\circ}C$ possesses the optimum properties (${\varepsilon}_r=241$, $d_{33}=78$, $k_p=0.34$ and $Q_m=1,121$). These results indicate that the ceramic is a promising candidate material for applications in lead free piezoelectric transformer and filter materials.

• 한국세라믹학회지
• /
• 제39권1호
• /
• pp.26-32
• /
• 2002

유전율(${\varepsilon}_r$) 126, $Q{\cdot}f_{0}(GHz)$값은 2240, 공진주파수의 온도계수(${\tau}_f$) $+68\;ppm/^{\circ}C$의 특성을 갖는 $0.3CaTiO_3-0.7(Li_{1/2}Nd_{1/2})TiO_3에\;Nd_2O_3$를 첨가하였을 때의 마이크로파 유전특성의 변화에 대해 고찰하였다. 유전율(${\varepsilon}_r$)은 5wt% $Nd_2O_3$ 첨가시 131로 가장높은 값을 나타내었으며, 이후 첨가량이 증가함에 따라 유전율은 감소함을 보였다. $Q{\cdot}f_{0}(GHz)$값은 9wt% $Nd_2O_3$ 첨가시까지 입계의 치밀화 등에 의해 3533까지 증가하다가 이후 l8wt% $Nd_2O_3$첨가시까지는 비정상적 입계성장의 영향으로 감소함을 보이고, 25 wt% 이상 첨가시에는 제2상인 $Nd_2Ti_2O_7$상의 영향으로 다시 증가함을 보였다. 공진주파수의 온도계수($({\tau}_f$)는 $Nd_2O_3$첨가에 따라 최초의 $+68\;ppm/^{\circ}C$에서 30wt% $Nd_2O_3$ 첨가시 $-46\;ppm/^{\circ}C$까지 변화함을 알 수 있었다. $0.3CaTiO_3-0.7(Li_{1/2}Nd_{1/2})TiO_3에\;Nd_2O_3$를 9wt% 첨가하여 $1425^{\circ}C$에서 3시간동안 소결한 시편에서 유전율(${\varepsilon}_r$)은 108, $Q{\cdot}f_{0}(GHz)$값은 3533, 공진주파수의 온도계수(${\varepsilon}_f$)가 $+6\;ppm/^{\circ}C$인 우수한 마이크로파 유전특성을 얻을 수 있었다.