• 한국대기환경학회지
• /
• 제20권6호
• /
• pp.749-758
• /
• 2004

Nitrous oxide ($N_2$O) has been known as an important trace gas due to the greenhouse gas and the major source of stratospheric oxide of nitrogen (NO). Soil is the major source of $N_2$O in nature. The physicochemical characteristics of soils affect the emission of $N_2$O from soil. These physicochemical parameters are soil moisture, soil temperature, and soil N content. Since these parameters are correlated to the flux of $N_2$O from soil individually and compositely, there still remain many unknowns in the mechanism to produce $N_2$O in soil and the roles of such physicochemical parameters which affect the soil $N_2$O emission. Soil $N_2$O fluxes were measured at different levels in water filled pore space (WFPS), soil temperature and soil N contents from the same amounts of soils which were sampled from agriculturally managed upland field in a depth of ～30 cm at Kunsan. The soil $N_2$O flux measurements were conducted in a laboratory with a closed flux chamber system. The optimum soil moisture and soil temperature were observed at 60% of WFPS and ～13$^{\circ}C$. The soil $N_2$O flux increased as soil N contents increases during the whole experimental hours (up to 48 hours). However, average $N_2$O flux decreased after ～30 hours when organic carbon was mixed with nitrogen in the sample soils. It is suggested that organic carbon could be important for the emission of $N_2$O, and that the ratio of N to C needs to be identified in the process of $N_2$O soil emission.

• 한국환경농학회지
• /
• 제31권3호
• /
• pp.205-211
• /
• 2012

BACKGROUND: Generally, nitrogen (N) fertilization higher than the recommended dose is applied during vegetable cultivation to increase productivity. But higher N fertilization also increases the concentrations of nitrate ions and nitrous oxide in soil. In this experiment, the impact of N fertilization was studied on nitrous oxide ($N_2O$) emission to standardize the optimum fertilization level for minimizing $N_2O$ emission as well as increasing crop productivity. Herein, we developed $N_2O$ emission inventory for upland soil region during red pepper and Chinese milk vetch cultivation. METHODS AND RESULTS: Nitrogen fertilizers were applied at different rates to study their effect on $N_2O$ emission during red pepper and Chinese milk vetch cultivation. The gas samples were collected by static closed chamber method and $N_2O$ concentration was measured by gas chromatography. The total $N_2O$ flux was steadily increased due to increasing N fertilization level, though the overall pattern of $N_2O$ emission dynamics was same. Application of N fertilization higher than the recommended dose increased the values of both seasonal $N_2O$ flux (94.5% for Chinese cabbage and 30.7% for red pepper) and $N_2O$ emission per unit crop yield (77.9% for Chinese cabbage and 23.2% for red pepper). Nitrous oxide inventory revealed that the $N_2O$ emission due to unit amount of N application from short-duration vegetable field in fall (autumn) season (6.36 kg/ha) was almost 70% higher than that during summer season. CONCLUSION: Application of excess N-fertilizers increased seasonal $N_2O$ flux especially the $N_2O$ flux per unit yield during both Chinese cabbage and red pepper cultivation. This suggested that the higher N fertilization than the recommended dose actually facilitates $N_2O$ emission than boosting plant productivity. The $N_2O$ inventory for upland farming in temperate region like Korea revealed that $N_2O$ flux due to unit amount of N-fertilizer application for Chinese cabbage in fall (autumn) season was comparatively higher than that of summer vegetables like red pepper. Therefore, the judicious N fertilization following recommended dose is required to suppress $N_2O$ emission with high vegetable productivity in upland soils.

• 한국대기환경학회지
• /
• 제17권2호
• /
• pp.203-212
• /
• 2001

During the growing season from June to August, 2000, the soil NO and $N_2$O fluxes were measured to elucidate characteristics of soil nitrogen emissions from different types of intensively managed agricultural soils at outskirts of Kunsan City, located in the western inland of Korea, Flux measurements were made using a closed chamber technique at two different agricultural fields; one was made from upland field, and the other from rice paddy field. The flux data from upland field were collected for both the green onion and soybean field. Concentrations of NO and $N_2$O inside a flux chamber ar 15 minute sampling interval were measured to determine their soil emissions. Either polyethylene syringes of teflon air bags were used for gas samples of $N_2$O and NO. The analysis of NO and $N_2$O was made using a chemiluminesence NO analyzer and GC-ECD, respectively no later than few hours after sample collection at laboratory. The gas fluxes were varied more than one standard deviation around their means. Relatively high soil gas emissions occurred in the aftermoon for both NO and $N_2$O. A sub-peak for $N_2$O emission was observed in the morning period, but not in the case of NO. NO emissions from rice paddy field were much less than those from upland site. It seems that water layer over the rice paddy field prevents gases from escaping from the soil surface covered with were during the irrigation and acts as a sink of these gases. The NO fluxes resulted from these field experiments were compared to those from grass soil and they were found to be much higher. Diurnal and daily variations of NO and $N_2$O emission were discussed and correlated with the effects of nitrogen fertilizer application on the increase of the level of soil nitrogen availability.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.539-544
• /
• 2012

We have grown AlN nanorods and AlN films using plasma-assisted molecular beam epitaxy by changing the Al source flux. Plasma-assisted molecular beam epitaxy of AlN was performed on c-plane $Al_2O_3$ substrates with different levels of aluminum (Al) flux but with the same nitrogen flux. Growth behavior of AlN was strongly affected by Al flux, as determined by in-situ reflection high energy electron diffraction. Prior to the growth, nitridation of the $Al_2O_3$ substrate was performed and a two-dimensionally grown AlN layer was formed by the nitridation process, in which the epitaxial relationship was determined to be [11-20]AlN//[10-10]$Al_2O_3$, and [10-10]AlN//[11-20]$Al_2O_3$. In the growth of AlN films after nitridation, vertically aligned nanorod-structured AlN was grown with a growth rate of $1.6{\mu}m/h$, in which the growth direction was <0001>, for low Al flux. However, with high Al flux, Al droplets with diameters of about $8{\mu}m$ were found, which implies an Al-rich growth environment. With moderate Al flux conditions, epitaxial AlN films were grown. Growth was maintained in two-dimensional or three-dimensional growth mode depending on the Al flux during the growth; however, final growth occurred in three-dimensional growth mode. A lowest root mean square roughness of 0.6 nm (for $2{\mu}m{\times}2{\mu}m$ area) was obtained, which indicates a very flat surface.

• 한국대기환경학회지
• /
• 제19권5호
• /
• pp.529-540
• /
• 2003

A closed chamber system was used for measuring $N_2$0 fluxes from an agriculturally managed upland soil in Kunsan during the growing season from May to July 2002. It is known that soil is one dominant source of atmospheric $N_2$O, contributing to about 57% (9 Tg y $^{-1}$ ) of the total annual global emission. Hence, its increasing emissions and concentrations are largely associated with agricultural activities. In order to elucidate characteristics of soil nitrogen emissions from intensively managed agricultural soils and to understand the roles of soil parameters (soil moisture, soil pH, soil temperature, and soil nitrogen) in the gas emission, $N_2$O soil emissions were measured at every hour during the experimental period (21 days). Soil $N_2$O fluxes were calculated based on changes of $N_2$O concentrations measured inside a closed chamber at every hour. The analysis of $N_2$O was made by using a Gas Chromatography (equipped with Electron Capture Detector). Soil parameters at sampling plots were also analyzed. Monthly averaged $N_2$O fluxes during May, June, and July were 0.14, 0.05, and 0.13 mg-$N_2$O m$^{-2}$ h$^{-1}$ , respectively. Soil temperature and soil pH did not significantly vary over the experimental period; soil temperatures ranged from 12∼$25^{\circ}C$, and soil pH ranged 4.56∼4.75. However, soil moisture varied significantly from 32% to 56% in WFPS. Relationships between soil parameters and $N_2$O fluxes exhibited positive linear relationships. Strong positive correlation ($R^2$ = 0.57, P< 0.0001) was found between $N_2$O flux and sil moisture. It suggests that soil moisture has affected strongly soil $N_2$O emissions during the experimental periods, while other parameters have remained relatively at constant levels. $N_2$O flux from agricultural soils was significant and should be taken account for the national emission inventory.

• 한국수자원학회논문집
• /
• 제52권11호
• /
• pp.917-929
• /
• 2019

하천의 탈질은 수질 개선과 정확한 아산화질소($N_2O$) 발생량 추정에 관련해서 매우 중요한 역할을 한다. 탈질과정은 질소 산화물($NO_3{^-}$)을 다수의 단계를 걸쳐 기체 질소($N_2$ 또는 $N_2O$)로 변화시키는 호흡과정으로, 강력한 온난화기체인 $N_2O$의 주요한 생물학적 배출 또는 흡수 과정이다. 수생태계에서는, 물의 범람, 기질 공급과 유체역학적, 생지화학적 특성의 복잡한 상호작용이 탈질 과정과 다단계 반응의 정도에 따라 중간산물인 $N_2O$ 발생량(flux)을 조절한다. 이처럼 기질의 농도뿐만 아니라 하상의 물 흐름과 체류시간이 반응 산물에 영향을 미치지만, 하천에서 탈질 정도를 조절하는 유체역학적 특성과 지형학적, 생지 화학적 인자의 상호작용에 대한 연구 결과는 아직 제한적이다. 본 실험은 미세지형 변화의 영향을 모의하기 위해서 2차원 실험 수로에 사구를 형성하여 하상지형에 따라, 정지상태의 폐쇄형 챔버를 이용해 $N_2O$ 발생량을 측정하였다. 또한 기질과의 미세지형의 상호작용을 확인하기 위해서 두 독립된 실험은 같은 수로와 지형 구조를 가지지만 다른 용존 유기탄소(DOC) 농도로 설계하였다. 또한 얻어진 자료를 토대로 Random Forest 모델을 활용하여 $N_2O$ 발생량과 조절인자를 추정하였다. 높은 DOC 농도 실험에선, $N_2O$ 발생량이 흐름 방향을 따라 증가하다 사구 뒤쪽 경사에서 가장 높은 발생량($14.6{\pm}8.40{\mu}g\;N_2O-N/m^2\;hr$)이 측정되며, 그 이후로 감소하는 경향을 보인다. 또한 사구 뒤쪽 경사에서 암모늄 농도가 $31.0{\pm}6.24{\mu}g-N/g\;dry\;soil$로 가장 높으며 $N_2O$ 발생량과 유사한 경향을 나타낸다. 반면에, 낮은 DOC 토양은 지형학적 변화에 따른 $N_2O$ 발생량과 암모늄의 변화를 나타내지 않았으며 발생량과 농도 또한 낮게 나타났다. 따라서 본 실험을 통해 비록 지형적 변화는 $N_2O$ 발생량과 화학적 특성에 영향을 미쳤지만, 그 효과는 탄소 가용성에 의해 제한된다는 것을 확인하였다.

• 대한화학회지
• /
• 제37권8호
• /
• pp.765-772
• /
• 1993

Flux인 $K_2MoO_4$와 섬유원료물질인 $K_2CO_3,\;TiO_2$를 혼합하고 1150$^{\circ}C$에서 용융시킨 다음 950$^{\circ}C$까지 서냉하여(서냉속도=5$^{\circ}C$/h) 층상구조를 갖는 사티탄산칼륨($K_2Ti_4O_9$)과 육티탄산칼륨($K_2Ti_6O_{13}$) 섬유를 합성하였다. Flux(F)와 출발원료물질(R)의 혼합비에 따른 최적 섬유성장 조건을 조사하기 위하여 F:R을 변화시키면서 반응시킨 결과 섬유의 결정상 및 성장속도가 F:R의 비에 크게 의존함을 알 수 있었으며 본 실험조건에서는 사티탄산칼륨과 육티탄산칼륨 모두 F:R=7:3 일 때 섬유의 성장이 가장 양호하였다. F:R = 7:3이고, 출발조성이 $K_2O{\cdot}4TiO_2$인 경우 생성물은 $K_2Ti_4O_9$과 약간의 $K_2Ti_6O_{13}$의 혼합상이 얻어졌으며 평균 섬유 길이는 ${\thickapprox}$ 4 mm 정도의 비교적 장섬유를 얻을 수 있었다. $K_2O{\cdot}6TiO_2$ 조성인 경우도 $K_2Ti_4O_9$의 혼합상이 형성되었고 섬유의 평균길이는 ${\thickapprox}$ 2 mm 정도임을 관찰할 수 있었다.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.453-460
• /
• 1997

Sr-ferrite having magnetoplumbite structure is similar to Ba-ferrite in magnetic characteristics, but better magnetic characteristics for using motor application. To improve remanence magnetic flux density(Br) and coercive force(iHc), it is necessary that sintered ferrites must have high density and grain size less than 1 $\mu$m. By varying n values in SrO.nFe2O3 basic composition, calcination temperature, and BaO addition, Sr-ferrite powder and sintered specimen was prepared. The n values, calcination temperature, and BaO addition affected secondary phase formation, particle size, and particle shape. BaO addition enhanced Fe2O3 secondary phase and hexagonal shape particle. Fe2O3 phase reduced sintered density which greatly decreased Br.

• 마이크로전자및패키징학회지
• /
• 제3권1호
• /
• pp.25-32
• /
• 1996

본 연구에서는 BaTiO3에 Sr과 Pb를 치환시켜TiO3 조성의 세라믹 유전체를 제조한 후 페로브스카이트형 Ba(Cu, Mo)O3를 저융점 flux 로 첨가하여 120$0^{\circ}C$ 이하의 여러온도에 서 소결을 행하였으며 flux 첨가량의 변화에 따른 소결거동 및 유전 특성의변화를 조사하였 다. 이러한 저온 소결용 유전체 세라믹스가 MLCC의 응용시 Pt-Pd계의합금을 내부전극으로 사용가능성을 검토하였다. Flux를 4mol%첨가한 TiO3-0.04Ba(Cu,Mo)O3 조성의 유전체는 120$0^{\circ}C$의 온도에서 2시간 소결했을 경우 소결밀도는 이론밀도의 95% 에 근접하였으며 이때 의 비유전율은 8000이상을 나타내었다. 이러한 소결 온도의 감소는 저융점인 ba(Cu,Mo)O3 계의 flux가 첨가되면서 비교적 낮은 온도에서 액상을 형성하여 소결을 촉진시켰기 때문으 로 사료된다.

• 동력기계공학회지
• /
• 제11권4호
• /
• pp.92-97
• /
• 2007

This study aims at investigating the wear behavior of thermally sprayed Ni-based self-flux alloy coatings against different counterparts. Ni-based self-flux alloy powders were flame-sprayed onto a carbon steel substrate and then heat-treated at temperature of $1000^{\circ}C$. Dry sliding wear tests were performed using the sliding speeds of 0.2 and 0.8 m/s and the applied loads of 5 and 20 N. AISI 52100, $Al_2O_3$, $Si_3N_4$ and $ZrO_2$ balls were used as counterpart materials. Wear behavior of Ni-based self-flux alloy coatings against different counterparts were studied using a scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy (EDX). It was revealed that wear behavior of Ni-based self-flux alloy coatings were much influenced by counterpart materials.