• Journal of the Korean institute of surface engineering
• /
• v.42 no.6
• /
• pp.251-255
• /
• 2009

In this study, the plasma etching of the TaN thin film with $O_2/BCl_3$/Ar gas chemistries was investigated. The equipment for the etching was an inductively coupled plasma (ICP) system. The etch rate of the TaN thin film and the selectivity of TaN to $SiO_2$ and PR was studied as a function of the process parameters, including the amount of $O_2$ added, an RF power, a DC-bias voltage and the process pressure. When the gas mixing ratio was $O_2$(3 sccm)/$BCl_3$(6 sccm)/Ar(14 sccm), with the other conditions fixed, the highest etch rate was obtained. As the RF power and the dc-bias voltage were increased, the etch rate of the TaN thin film was increased. X-ray photoelectron spectroscopy (XPS) was used to investigate the chemical states of the surface of the TaN thin film.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.98-106
• /
• 1996

A thin film of aluminum for ultra large scale integrated circuits metalization has been deposited on TiN and SiO$_{2}$ substrates by plasma assisted chemical vapor deposition using DMEAA (dimenthylethylamine alane) as a precursor. The effects of plasma on surface topology and growth characteristics were investigated. Thermal CVD Al could not be got continuous films on insulating subsrate such as SiO$_{2}$. However, it was found that Al films could be deposited on SiO$_{2}$ substate without any pretreatments by the hydrogen plasma for pyrolysis of DMEAA. Compared to the thermal CVD, PACVD films showed much better reflectance and resistance on TiN and SiO$_{2}$ substrate. We obtained mirror-like PACVD Al film of 90% reflectance and resistance on TiN and SiO$_{2}$ substrates. We obtained mirror-like PACVD Al film of 90% reflectance on TiN substrate. Excellent conformal step coverage was obtained on submicron contact holes ;by the PACVD blanket deposition.

• Journal of Korean Vacuum Science & Technology
• /
• v.2 no.1
• /
• pp.25-31
• /
• 1998

The reliability of fluorine doped silicon oxide (SiOF) films for intermetal dielectrics in multilevel interconnections of ultra-large scale integrated circuits (ULSIs) is investigated. SiOF films were deposited by electron cyclotron resonance plasma-enhanced chemical vapor deposition (ECRPECVD) using H-free source gases, i.e., SiF4 and O2. The effect of post plasma treatment on the moisture absorption and dielectric properties of SiOF films was carried out I terms of air exposure time, The reliability test of Cu/TiN/SiOF/Fi specimen was carried out in terms of temperature by rapid thermal annealing (RTA) in N2 ambient. After O2 plasma treatment,, no appreciable peak directly related to moisture absorption was detected. The capacitance-voltage (C-V) characteristics of the O2 plasma treated SiOF film showed that the film remained to hold the sound dielectric properties even after boiling treatment. The Cu/TiN/SiOF/Si system was found to be reliable up to $600^{\circ}C$.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.5
• /
• pp.669-676
• /
• 1995

Background: The cell-mediated immunity is needed for eradicating the tubercle bacilli. Prostaglandin(PG), especially PG $E_2$, is involved in cellular immunosuppression. It is known that the PG $E_2$ is suppressed by indomethacin. For using indomethacin as a immunomodulator of intractable pulmonary tuberculosis(Tbc) patients, we measured the tuberculin skin test(TST) and the plasma PG $E_2$ levels. Method: The forty-eight inpatients with sputum positive acid-fast stain bacilli were classified into 6 groups according to antiTbc chemotherapy history(new and intractable cases), plain chest roetgenogram(minimal and far advanced cases), and TST reaction(nagative and positive cases). Except for one group(n=2; new, minimal, and negative cases of TST reaction) of the 6 groups, all subjects(n=46) were measured for the plasma PG $E_2$, levels with radioimmunoassay. Results: 1) There was no significant difference in the plasma PG $E_2$ levels among A group(far advanced and positive TST reaction cases, n=10, $11.22{\pm}2.86\;pg/ml$), B group(minimal and negative TST reaction cases, n=9, $11.35{\pm}2.20$) and C group(far advanced and positive TST reaction cases, n=7, $11.11{\pm}2.30$) in the new cases(p>0.05). 2) There was no significant difference in the plasma PG $E_2$ levels between positive(n=10, $9.25{\pm}2.21$) and negative(n=10, $8.25{\pm}1.13$) groups by TST in the intractable cases(p>0.05). 3) Comparing the plasma PG $E_2$ levels between new(n=26, $11.35{\pm}2.41$) and intractable(n=20, $8.75{\pm}1.78$) groups, the intractable group had significi- andy lower plasma PG $E_2$ levels(p<0.05). 4) There was no significant difference in the plasma PG $E_2$ levels between negative(n=19, $9.88{\pm}2.43$) and positive(n=27, $10.46{\pm}2.56$) groups by TST(p>0.05). 5) There was no significant difference in the plasma PG $E_2$ levels between male(n=32, $10.07{\pm}2.44$) and female(n=14, $10.56{\pm}2.70$)(p>0.05). 6) There was no significant difference in the plasma PG $E_2$ levels among 2nd(n=5, $10.21{\pm}2.86$), 3rd(n=9, $9.97{\pm}2.47$), 4th(n=13, $11.35{\pm}2.33$) and 5th(n=19, $9.57{\pm}2.48$) decades(p>0.05). 7) There was no significant correlation between the induration sizes of the TST and the plasma PG $E_2$ levels(r=0.054, p>0.05). Conclusion: From the above results, the plasma PG $E_2$ levels of intractable group are not higher as the authors had expected. There was no significant difference in the plasma PG $E_2$ levels by the lesion sizes of plain chest roentgenogram and the induration sizes of TST, so more study will be needed to use the indomethacin as a immunomodulator for intractable pulmonary tuberculosis patients.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.6
• /
• pp.543-550
• /
• 2002

In this paper, the $CF_4$ decomposition rate and by-product were investigated for two simulated plasma reactors which are metal particle reactor and spiral wire reactors as a function of mixed gases. The $CF_4$ decomposition rate by plasma reactor with metal particle electrode had a gain of 20~25% over that by plasma reactor with spiral wire electrode. The $CF_4$ decomposition efficiency increases with increasing applied voltage up to the critical voltage for spark formation. The $CF_4$ decomposition efficiency of metal particle reactor was about 80% at AC 24kV. The $CF_4$ decomposition rate used Ar-$N_2$ as base gas was the highest among three base gases of $N_2$, $Ar-N_2$, air. The by-products of the $N_2$, $N_2Ar$ base as were similar, but in case of air base they were different.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.491-491
• /
• 2013

A novel plasma system has been developed for 3-dimensional modification of the carbon nano-powders. Improvement of dispersion of these nano materials are studied by plasma discharge, not using chemical modification. The plasma process is considered to great advantages over wet chemical process due to environmental, economic viewpoint, and uniformity over the treated volume. The uniform dispersion is a critical factor for these material's nano composite applications. Using this plasma system, graphene, carbon black, and CNT was treated and functionalized. Several key discharge conditions such as Ar/H2/O2 or Ar/H2/NH3 gas ratio, treatment time, power, feeder's vibration frequency are investigated. Hydrophobic of graphene has turned some more into hydrophilic by reaction test with water, electrophoresis, surface contact angle test, and turbidity analysis. The oxygen content ratio in the plasma treated CNT has increased about 3.7 times than the untreatedone. In the case of graphene and carbon black, the oxygen- and nitrogen- content has been enhanced average 10%. O-H (N-H) peak, C-O (C-N) peak, and C=O (C=N) peak data have been detected by FTIR measurement and intensified compared to before-plasma treatment due to O2 or NH3 content.

• Journal of the Korean Vacuum Society
• /
• v.19 no.1
• /
• pp.10-13
• /
• 2010

We studied the effect of $O_2$ plasma treatments on the electrical property of Ti / Al ohmic contacts to N-face n-type GaN. The surface of N-face, n-type GaN has been treated with $O_2$ plasma for 120 s before the deposition of bilayered electrodes, Ti (50 nm) / Al (35 nm), and its contact resistance was compared with that of the reference sample without $O_2$ plasma. As a result, we found that the ohmic contact was reduced from $4.3\;{\times}\;10^{-1}\;{\Omega}cm^2$ to $1.25\;{\times}\;10^{-3}\;{\Omega}cm^2$ by applying $O_2$ plasma on the surface of n-type GaN, which was attributed to the reduction in the Schottky barrier height (SBH), caused by nitrogen vacancies formed during the $O_2$ plasma process.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.152-157
• /
• 2007

AlGaN/GaN high electron mobility transistors (HEMTs) were fabricated and the effect of ${N_2}O$ plasma on the electrical characteristics of the devices was investigated. The HEMT exposed to ${N_2}O$ plasma formed by 40 W of RF power in a chamber with pressure of 20 mTorr at a temperature of $200^{\circ}C$, exhibited a reduction of gate leakage current from 246 nA to 1.2 pA by 10 seconds treatment. The current between the two isolated active regions reduced from 3 uA to 7 nA and the sheet resistance of the active layer was lowered also. The variations of electrical characteristics for HEMT were occurred within a short time expose of 10 seconds and the successive expose did not influence on the improvements of gate leakage characteristics and conductivity of the active region. The reduced leakage current level was not varied by successive $SiO_2$ deposition and its removal. The transconductnace and drain current of AlGaN/GaN HEMTs were increased also by the expose to the ${N_2}O$ plasma.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.889-892
• /
• 2003

Effects of $N_{2}$ plasma treatment of the Al bottom cathode on the characteristics of top emission inverted organic light emitting diodes (TEIOLEDs) were studied. TEIOLEDs were fabricated by depositing an Al bottom cathode, a tris-(8-hydroxyquinoline) aluminum $(Alq_{3})$ emitting layer, an N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-diphenyl-4,4'diamine (TPD) hole transport layer, and an indium tin oxide (ITO) top anode sequentially. The Al bottom cathode layer was subjected to $N_{2}$ plasma treatment before deposition of the $Alq_{3}$ layer. X-ray photoelectron spectroscopy suggested that the existence of and the amount of $AIN_x$ between the $Alq_{3}$ emitting layer and the Al bottom cathode significantly affect the characteristics of TEIOLEDs. The maximum external quantum efficiency of the TEIOLED with an Ai bottom cathode subjected to $N_{2}$ plasma treatment for 30 s was about twice as high as that of the TEIOLED with an untreated Al bottom cathode.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.78-82
• /
• 2005

펄스 플라즈마 원자층 증착 방법 (PPALD : Pulse Plasma Atomic Layer Deposition)을 이용하여 삼원계 박막인 W-C-N 박막을 ILD layer인 TEOS 위에 제조하였다. 실험은 $WF_6,\;N_2.\;CH_4$ 가스의 순차적 주입과 $N_2$를 이용한 퍼징으로 이루어지며 $N_2$와 $CH_4$ 가스 주입 시에 pulse plasma가 적용되었다. 일반적인 ALD 증착 기구를 그대로 따르는 PPALD 방법에 의해 제조된 W-C-N 박막은 $H_2/N_2$ 플라즈마 초기 표면 처리에 의해 incubation cycles 없이 초기 cycles부터 0.2 nm/cycle의 일정한 증착율을 가지고 증착되므로 정확한 두께의 control이 가능하며 $300\;{\mu}{\Omega}-cm$의 매우 낮은 비저항 특성을 나타내었다.