• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.11a
• /
• pp.36-36
• /
• 1998

• 전자공학회논문지 IE
• /
• v.44 no.2
• /
• pp.8-13
• /
• 2007

This paper aims to analyze the characteristics of ITO which are caused by variation of plasma condition to fabricate the OLED of high efficiency. We treated $N_2$ gas and $O_2$ gas plasma on the surface of the ITO by changing their RF plasma power into 100 W, 200 W, 400 W and by changing their 9as pressure into 12 mTorr, 120 mTorr. The work function of ITO that plasma treatment was done by using $N_2$ gas had value of $4.88{\sim}5.07\;eV$, and that by using $O_2$ gas, $4.85{\sim}4.97 eV$. The characteristics of the ITO were most efficient in the $N_2$ gas plasma with the RF power of 200W and gas pressure of 120 mTorr. The rms roughness of ITO surface is the value from AFM image. In this case, ITO obtained $25.2\;{\AA}$ and $30.5\;{\AA}$ in the $N_2$ and $O_2$ gas plasma respectively when it had the RF power of 200 W. But ITO that didn't have plasma treatment was $44.5{\AA}$. The variation of ITO transmittance was almost not discovered by the change of $N_2$ gas and $O_2$ gas pressure.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.383-387
• /
• 1998

The effect of hydrophilic surface modification of low density polyethylene(LDPE) byt the plasma gas($O_2$, $N_2$, and $O_2/N_2$) was investigated from the point of view of the functionalities of the generated LDPE surfaces and the contact angle. By virtue of x-ray photoelectron spectra(XPS) and attenuated total reflectance(FT-IR ATR) analysis, the LDPE surfaces treated with plasma were generated with oxygen functionalities of carbonyl, carboxyl, and the like, nitrogen functionalities by nitrogen plasma and mixing of nitrogen and oxygen plasma treatment were identified with. It was found that nitrogen plasma treatment showed with minimum value at contact angle for rf-power and treatment time, we had obtained optimum condition for hydrophilic surface modification at composite parameter, [(W/FM)t] 520~550GJs/kg.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.9
• /
• pp.1248-1255
• /
• 2009

This study was carried out to evaluate the fatty acid composition in Nellore cows supplemented with either linseed (n-3) or canola grains (n-6 and n-9). Fifteen Nellore cows, aged five years and bodyweight 550 kg${\pm}$48 kg, were randomly distributed to the following treatments: CON (control), LIN (linseed) and CAN (canola grains). The cows were fed for 80 days. The concentrations of C18:0, C18:2 n-6 and C20:3 n-6 fatty acid were higher (p<0.10) in CON blood plasma in comparison to follicular liquid. Likewise, PUFA, n-6 contents, PUFA:SFA and n-6:n-3 ratios were higher (p<0.10) in blood plasma. On the other hand, C18:1 n-9, C22:5 n-3, MUFA and n-3 contents were lower (p<0.10) in blood plasma. C18:0, C18:2 n-6, C18:3 n-3, C22:5 n-3, PUFA, n-6, n-3 contents and PUFA:SFA ratio were higher (p<0.10) in LIN blood plasma than in the follicular liquid. Nevertheless, C14:0, C16:0, C16:1 n-7, PUFA, C16:0, C18:1 n-9 and MUFA contents were lower (p<0.10) in LIN blood plasma. On treatment CAN, the C18:0 and SFA contents, and n-6:n-3 ratios were higher (p<0.10) in blood plasma. However, C20:3 n-6, C22:5 n-3, PUFA and n-3 contents were lower (p<0.10) in blood plasma. C16:0, C18:0, PUFA, SFA contents and PUFA:SFA ratio did not differ (p>0.10) among the treatments. C14:0, C16:1 n-7, C18:2 n-6 and n-6 contents were higher (p<0.10) for CON and CAN than LIN. C17:1 n-7, C20:4 n-6 and C 22:0 contents were higher (p<0.10) for CAN than CON and LIN. C18:1 n-9, C18:3 n-3, MUFA and n-3 contents were higher (p<0.10) for LIN and CAN than CON. C20:3 n-6 content and n-6:n-3 ratio were higher (p<0.10) for CON than LIN and CAN. C22:5 n-3 content were higher (p<0.10) for CON and LIN than CAN. The concentrations of fatty acids in blood plasma and follicular liquid were not correlated for any fatty acid, independent of the treatment studied. Canola grain added to the diet of Nellore cows resulted in increased concentrations of fatty acids n-6 and n-3 in follicular liquid.

• Korean Journal of Materials Research
• /
• v.14 no.4
• /
• pp.265-269
• /
• 2004

Plasma nitrocarburising and post oxidation were performed on SCM435 steel by a pulsed plasma ion nitriding system. Plasma oxidation resulted in the formation of a very thin ferritic oxide layer 1-2 $\mu\textrm{m}$ thick on top of a 15～25 $\mu\textrm{m}$ $\varepsilon$-F $e_{2-3}$(N,C) nitrocarburized compound layer. The growth rate of oxide layer increased with the treatment temperature and time. However, the oxide layer was easily spalled from the compound layer either for both oxidation temperatures above $450^{\circ}C$, or for oxidation time more than 2 hrs at oxidation temperature $400^{\circ}C$. It was confirmed that the relative amount of $Fe_2$$O_3$, compared with $e_3$$O_4$, increased rapidly with the oxidation temperature. The amounts of ${\gamma}$'-$Fe_4$(N,C) and $\theta$-$Fe_3$C, generated from dissociation from $\varepsilon$-$Fe_{2-3}$ /(N,C) phase during $O_2$ plasma sputtering, were also increased with the oxidation temperature.e.

• Carbon letters
• /
• v.5 no.3
• /
• pp.103-107
• /
• 2004

The atmospheric pressure plasma treatments ($Ar/O_2$ and $Ar/N_2$) of activated carbon fibers (ACFs) were carried out to introduce hydrophilic functional groups on carbon surfaces in order to enhance the hydrogen chloride gas (HCl) adsorption. Surface properties of the ACFs were determined by XPS and SEM. $N_2$/77 K adsorption isotherms were investigated by BET and D-R (Dubinin-Radushkevich) plot methods. The HCl removal efficiency was confirmed by HCl detecting tubes (range:1~40 or 40~1000 ppm). As experimental results, it was found that all plasma-treated ACFs showed the decrease in the pore volume, but the HCl removal efficiency showed higher level than that of the untreated ACFs. This result indicated that the plasma treatments led to the conformation of hydrophilic functional groups on the carbon surfaces, resulting in the increase of the interaction between the ACFs and HCl gas.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.3
• /
• pp.27-33
• /
• 2000

The selective chemical vapor deposition techniques for Cu metallization were studied. For enhancing the selectivity, furnace annealing and N$_{2}$ plasma were treated on patterned TiN/BPSG prior to the copper deposition. As a result, Cu did not deposited lead to suppressing the nucleation on BPSG singificantly. With the increasement the plasma treatment temperature, copper nucleation on BPSG was suppressed mote effectively, From TOF-SIMS(Time-of-Flight Secondary ion Mass Spectrometry), it is considered that annealing and N$_{2}$ plasma treatment remove hydroxyl(0-H) group so that eliminating the nucleation site for copper precursor enhance the selectivity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.214-215
• /
• 2007

Etch rates and surface chemistry of phenol formaldehyde-based photoresist after short time $O_2\;and\;N_2O$ radio frequency (RF) plasma treatment depending on exposure time were investigated. It was found that the etch rate of photoresist sharply increased after discharge turn on and reached a limit with increase in plasma exposure time in both gases. X-ray photoelectron spectroscopy (XPS) analysis showed that the surface chemical structure become nearly constant after the treatment of 15 sec. Concentration of surface oxygen-containing groups after processing both in oxygen and in $N_2O$ plasmas is similar.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.1
• /
• pp.3-9
• /
• 2011

Plasma nitriding of stainless steels has been investigated over a range of temperature from 400 to $500^{\circ}C$ and time from 10 to 20 hours. Characterization of systematic materials was carried out in terms of mechanical properties and corrosion behaviors. The results showed that plasma nitriding conducted at low temperatures not only increased the surface hardness, but also improved the corrosion resistance of STS 316L, STS409L, and STS 420J2. It was found that plasma-nitriding treatment at $500^{\circ}C$ resulted in increasing the corrosion performance of STS 409L and STS 420J2, while STS 316L was observed with server and massive damage on surface due to the formation of CrN.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.302-308
• /
• 2012

The objective of this study is to investigate optimum reaction conditions for the grafting of poly($N$-vinyl- 2-pyrrolidone) (PVP) onto the surface of plasma-treated polypropylene film. The plasma treatment conditions were fixed as 200 W rf power, 6 LPM Ar flow rate, 30 sec treatment time, and 5 min exposure time after treatment. For graft copolymerization, we investigated the change of grafting degree with respect to reaction time, reaction temperature and $N$-vinyl-2-pyrrolidone concentration. Maximum grafting degree was obtained at the conditions of 6 h reaction time, $90^{\circ}C$ reaction temperature, and 40% $N$-vinyl-2-pyrrolidone concentration. The introduction of PVP was confirmed by ATR-FTIR, XPS, and SEM analysis.