References
- D. L. Garrec, S. Gori, L. Luo, D. Lessard, D. C. Smith, M. Yessine, M. Ranger, and J. Leroux, J. Control. Release, 99, 83 (2004). https://doi.org/10.1016/j.jconrel.2004.06.018
- M. Iwata and H. Ueda, Drug Dev. Ind. Pharm., 22, 1161 (1996). https://doi.org/10.3109/03639049609065953
- K. P. Chowdary and K. V. Pamesh, Indian Drugs, 32, 477 (1995).
- B. I. Da Silvera, Eur. Polym. J., 29, 1095 (1993). https://doi.org/10.1016/0014-3057(93)90315-7
- F. A. A. Sagheer and N. M. El-Sawy, J. Appl. Polym. Sci., 76, 282 (2000). https://doi.org/10.1002/(SICI)1097-4628(20000418)76:3<282::AID-APP2>3.0.CO;2-8
- G. S. Srinivasa Rao and R. C. Jain, J. Appl. Polym. Sci., 88, 2173 (2003). https://doi.org/10.1002/app.11866
- Z. M. Liu, Z. K. Xu, L. S. Wan, J. Wu, and M. Ulbricht, J. Membr. Sci., 249, 21 (2005). https://doi.org/10.1016/j.memsci.2004.10.001
- J. Pieracci, J. V. Crivello, and G. Belfort, J. Membr. Sci., 156, 223 (1999). https://doi.org/10.1016/S0376-7388(98)00347-0
- J. Pieracci, J. V. Crivello, and G. Belfort, Chem. Mater., 12, 2123 (2000). https://doi.org/10.1021/cm9907864
- J. Pieracci, J. V. Crivello, and G. Belfort, J. Membr. Sci., 202, 1 (2002). https://doi.org/10.1016/S0376-7388(01)00624-X
- M. Zeniewicz, J. Adhes. Sci. Technol., 15, 1769 (2001). https://doi.org/10.1163/15685610152715773
- G. Xu and S. Lin, Macromol. Sci. Rev. Macromol. Chem. Phys., 34, 555 (1994). https://doi.org/10.1080/15321799408014167
- C. M. Chen, React. Funct. Polym., 68, 1307 (2008). https://doi.org/10.1016/j.reactfunctpolym.2008.06.008
- C. Tyagi, L. Kumar, and H. Singh, J. Appl. Polym., 111, 1381 (2009). https://doi.org/10.1002/app.28933
- H. V. Boenig, Plasma Science and Technology, Cornell University Press, New York, 1982.
- S. L. Kaplan and P. W. Rose, Proceedings of the 46th Annum Conference of the Society of Plastics Engineers, Atlanta, USA, p 1542 (1988).
- N. H. Ladizesky and I. M. Ward, J. Mater. Sci. Mater. Med., 6, 497 (1995). https://doi.org/10.1007/BF00151029
- N. Gomathi and S. Neogi, Appl. Surf. Sci., 255, 7590 (2009). https://doi.org/10.1016/j.apsusc.2009.04.034
- J. S. Jung, S. W. Myung, and H. S. Choi, Korean J. Chem. Eng., 25, 1190 (2008). https://doi.org/10.1007/s11814-008-0196-x
- V. A. Titov, T. G. Shikova, V. V. Rybkin, D. S. Smirnov, T. A. Ageeva, and H. S. Choi, High Temp. Mat. Pr., 10, 467 (2006). https://doi.org/10.1615/HighTempMatProc.v10.i3.100
- H. S. Choi, V. V. Rybkin, V. A. Titov, T. G. Shikova, and T. A. Ageeva, Surf. Coat. Tech., 200, 4479 (2006). https://doi.org/10.1016/j.surfcoat.2005.03.037
- O. J. Kwon, S. Tang, S. W. Myung, N. Lu, and H. S. Choi, Surf. Coat. Tech., 192, 1 (2005). https://doi.org/10.1016/j.surfcoat.2004.09.018
- K. S. Chen, Y. A. Ku, H. R. Lin, T. R. Yan, D. C. Sheu, and T. M. Chen, J. Appl. Polym. Sci., 100, 803 (2006). https://doi.org/10.1002/app.23111
- M. Zeniewicz, J. Adhes. Sci. Technol., 15, 1769 (2001). https://doi.org/10.1163/15685610152715773
- N. V. Bhat, D. J. Upadhyay, R. R. Deshmukh, and S. K. Gupta, J. Phys. Chem. B, 107, 4550 (2003). https://doi.org/10.1021/jp021729s
- O. J. Kwon, S. Tang, S. W. Myung, N. Lu, and H. S. Choi, Surf. Coat. Tech., 192, 1 (2005). https://doi.org/10.1016/j.surfcoat.2004.09.018
- V. Nguyen, W. Yoshida, J. D. Jou, and Y. Cohen, J. Polym. Sci. Part A: Polym. Chem., 40, 26 (2002). https://doi.org/10.1002/pola.10081
- J.-S. Jung, I.-Y. Yang, S.-W. Myung, H.-S. Choi, and J.-H. Kim, Polymer(Korea), 31, 308 (2007).
- F. Poncin-Epaillard, J.-C. Brosse, and T. Falher, Macromol. Chem. Phys., 199, 1613 (1998).
- A. Sionkowska, M. Wisniewski, H. Kaczmarek, J. Skopinska, P. Chevallier, D. Mantovani, S. Lazare, and V. Tokarev, Appl. Surf. Sci., 253, 1970 (2006). https://doi.org/10.1016/j.apsusc.2006.03.048
Cited by
- The approaches for promoting PP adhesion based on the surface modification vol.28, pp.5, 2014, https://doi.org/10.1080/01694243.2013.838826
- Effect of gamma irradiation on polypropylene yarns under air and water vol.330, pp.3, 2021, https://doi.org/10.1007/s10967-021-08015-0