• Proceedings of the Korean Vacuum Society Conference
• /
• 2003.02a
• /
• pp.75-75
• /
• 2003

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.6
• /
• pp.361-367
• /
• 2009

The two-step gas nitriding was adopted to increase the depth of surface hardening in 3%Cr-Mo-V steel. The two-step gas nitriding consisted of Step I; $520^{\circ}C{\times}20\;hrs$ and Step II; $550^{\circ}{\times}70\;hrs$. The layer of two-step gas nitriding showed better uniformity and deeper nitriding layer than one-step gas-nitriding layer. The maximum surface hardness showed the value of 850 Hv. The maximum depth of nitrogen permeation showed $750\;{\mu}m$ (350 Hv). X-ray diffraction analysis showed that compound layer was mainly consisted of CrN and $\varepsilon-Fe_3N$ phases. These phases were presumed contributing to surface hardening and wear resistance. However, the corrosion resistance of gas-nitrided Cr-Mo-V steel were not improved in the solution of 1 N HCl and NaOH. Therefore, it is necessary that the continuous study for improvement of corrosion resistance hereafter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.144-148
• /
• 2005

At the previous papers, we showed that ${K_2}O$-CaO-${P_2}{O_5}$ glasses had a solubility in air so that they could be used for glass fertilizer. In this work, we fabricated the Eco-glass fertilizer containing trace elements of B, Mg, Zn, Fe, Cu, Co, Mo, the needed micronutrients for plants to grow, by a melt-quenching process. The dissolution properties in these glasses were investigated with a pH meter and an ICP analyzer. The trace elements doped glasses showed similar behavior in dissolutions and stability properties with the mother glass without containing trace elements. In addition, the dissolution amount of each trace elements depends on the mother glass composition and the quantity of each trace elements, which determine the dissolving velocity of chemical elements.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.289.1-289.1
• /
• 2008

• Korean Journal of Microbiology
• /
• v.6 no.1
• /
• pp.12-21
• /
• 1968

The accelerate effects on the growth rate and the capacity of fermentation of L. delbrukii and B. subtilis was investigated in the Henneberg's medium added by various amounts of cellular components of Chlorella and Scenedesmus and also was investigated in the media added micronutritional elements such as Mn, Fe and Mo, etc. The results in the comparative experiments are as follow; 1. Various amounts of Chlorella cell components in the media accelerated remarkably the lactic acid formation and growth of L. delbrukii. For example, lactic acid formation in the medium of contained 1 percent Chlorella cell components was promoted more than twice effects compare with control. 2. The formation of .alpha.-amylase by B. subtilis in the medium of 2 percent Chlorella cell contents was also promoted more than nine twice effects compare with control. 3. The formation of lactic acid of L. delbruckii in the medium of Scenedesmus cell contents was a little more than in the medium of Chlorella cell contents. 4. The lactic acid fermented level attained with the addition of 0.2-0.25 percent Chlorella cells was the effect of promoting fermentation attained of saturating level at 100$\mu$g. /ml. of Mn and 0. 1 $\mu$g./ml. of Fe.

• Journal of Sensor Science and Technology
• /
• v.11 no.2
• /
• pp.77-83
• /
• 2002

In order to get low cost and portability, semiconductor gas sensor need to have low operating temperature and high sensitivity. $Fe_2O_3$ based sensors which were doped with metal oxide catalysts($MoO_3$, $V_2O_5$, $TiO_2$, and CdO) were fabricated by screen printing method. To improve electrical stability of sensors, the $Fe_2O_3$ sensors were annealed in $N_2$ at $700^{\circ}C$ for 2 hours. The $V_2O_5$ doped $Fe_2O_3$ sensor showed about $80{\sim}90%$ sensitivity at alcohol 1,000 ppm and have good selectivity to hydrocarbon gas and tobacco odors. The fabricated sensor and PIC-chip were employed for portable alarm system.

• Journal of Powder Materials
• /
• v.16 no.5
• /
• pp.316-325
• /
• 2009

Fe based (Fe$_{68.2}$C$_{5.9}$Si$_{3.5}$B$_{6.7}$P$_{9.6}$Cr$_{2.1}$Mo$_{2.0}$Al$_{2.0}$) amorphous powder, which is a composition of iron blast cast slag, were produced by a gas atomization process, and sequently mixed with ductile Cu powder by a mechanical ball milling process. The experiment results show that the as-prepared Fe amorphous powders less than 90 $\mu$m in size has a fully amorphous phase and its weight fraction was about 73.7%. The as-atomized amorphous Fe powders had a complete spherical shape with very clean surface. Differential scanning calorimetric results of the as-atomized Fe powders less than 90 $\mu$m showed that the glass transition, T$_g$, onset crystallization, T$_x$, and super-cooled liquid range $\Delta$T=T$_x$-T$_g$ were 512, 548 and 36$^{\circ}C$, respectively. Fe amorphous powders were mixed and deformed well with 10 wt.% Cu by using AGO-2 high energy ball mill under 500 rpm.

• Journal of Powder Materials
• /
• v.16 no.5
• /
• pp.326-335
• /
• 2009

Fe based (Fe$_{68.2}$C$_{5.9}$Si$_{3.5}$B$_{6.7}$P$_{9.6}$Cr$_{2.1}$Mo$_{2.0}$Al$_{2.0}$) amorphous powder, which is a composition of iron blast cast slag, were produced by a gas atomization process, and sequently mixed with ductile Cu powder by a mechanical ball milling process. The Fe-based amorphous powders and the Fe-Cu composite powders were compacted by a spark plasma sintering (SPS) process. Densification of the Fe amorphous-Cu composited powders by spark plasma sintering of was occurred through a plastic deformation of the each amorphous powder and Cu phase. The SPS samples milled by AGO-2 under 500 rpm had the best homogeneity of Cu phase and showed the smallest Cu pool size. Micro-Vickers hardness of the as-SPSed specimens was changed with the milling processes.

• Journal of Magnetics
• /
• v.4 no.1
• /
• pp.10-12
• /
• 1999

We report the salient features of the magnetic properties of amorphous$ Fe_{84-x}Nb_7B_{8+x}Cu_1$ (x=0, 1, 4) alloys. The study of dc-magnetization properties and the ac-susceptibility was carried out. The temperature dependence of the magnetization follows the predictions of spin wave excitations with long wavelengths. Especially, the addition of boron modifies the magnetic properties: the spin wave stiffness increases from 56.8 to 65.7 meV$\AA$2 and Curie temperature increases from 298 K to 352 K. This result indicates a magnetic hardening of the exchange interaction by higher exchange energy. Thus, the substitution of iron by boron favours the increase of magnetic order in this system.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.143.2-143
• /
• 1998