• The Korean Journal of Ceramics
• /
• v.1 no.4
• /
• pp.204-208
• /
• 1995

The microstructure and electrical propetries were investigated for polycrystalline $Ba^{1-x}Sr_xTiO_3$(BST) thin films deposited on Pt/Ti/$SiO_2$(PTSS) and Pt/MgO(PM) substrates by metalorganic chemical vapor deposition (MOCVD). BST films on PTSS have coulmnar and porous structures, while on PM have an equiaxied and dense structure. The dielectric constant and a dissipation factor of BST films on PTSS and 20 fC/$\mu \textrm{cm}^3$ on PTSS and 12fC/$\mu \textrm{cm}^2$ on PM was obtained at an applied electric field of 0.06 MV/cm. Leakage current density of BST films on PM was smaller than that on PTSS. The leakage current density level was about $8\times10^{-8}A/\textrm{cm}^2$ at 0.04MV/cm.

• Journal of Applied Biological Chemistry
• /
• v.66
• /
• pp.477-483
• /
• 2023

The flowers of Carthamus tinctorius (Safflower) were extracted with 80% aqueous methanol (CTex) and the concentrates were partitioned into EtOAc (CTE), n-BuOH (CTB), and H₂O (CTW) fractions. Repeated silica gel (SiO₂) and octadecyl silica gel column chromatographies for the EtOAc and n-BuOH fractions led to isolation of four flavonol glycosides. Nuclear magnetic resornance, infrarad spectroscopy, and mass spectroscopy revealed the chemical structure of the isolated compounds, astragalin (1), isoquercetin (2), nicotiflorin (3), and rutin (4). Quantitative analysis of four isolated compounds in CTex was performed by HPLC. CTex was found to contain 1 at 0.107, 2 at 0.367, 3 at 6.752, and 4 at 0.991 mg/g, respectively. Through this study, an experiment was conducted to evaluate the protective effect on pancreatic islets of the extract, solvent fractions, and all isolated compounds using a zebrafish larvae damaged by alloxan. Pancreatic islet size treated with EtOAc (CTE), n-BuOH (CTB), and H₂O (CTW) fractions and compounds 1-4 significantly increased compared to the alloxan-induced group. These results indicate that C. tinctorius flowers and its isolated compounds are used as potential anti-diabetic agents.

• Journal of the Korean Ceramic Society
• /
• v.12 no.4
• /
• pp.29-36
• /
• 1975

Korean clinochlore, kaolin, pyrophillite and a technical grade of alumina have been used to investigate the effects of Al2O3 on the formation and properties of cordierite bodies. The body compositions were formulated from the proper proportions of the above raw materials to cover the range of composition from the point corresponding to the stoichiometric formula of cordierite, bythe consecutive increasment of 0.2mol. Al2O3, toward the apex of Al2O3 on the MgO-Al2O3-SiO2 triaxial diagram. Each of bodies was fired with the elevated temperatures from 110$0^{\circ}C$ to 140$0^{\circ}C$ by 5$0^{\circ}C$ interval. Linear shrinkage and water absorption were taken as measures for the firing range of the bodies. The formation of cordierite was estimated from the comparative study of X-ray diffraction and dilatometry of the fired bodies. The formation of a large amount of cordierite was initiated about 120$0^{\circ}C$. The content of Al2O3 exceeded up to 0.8 mol. comparing to the stoichiometric formula of cordierite broadens the firing range of the body.

• Journal of the Korean Ceramic Society
• /
• v.35 no.10
• /
• pp.1061-1069
• /
• 1998

The thermal instability of Al2TiO5 Ceramics was contrlled by solid solution with MgO SiO2 and ZrO2 through electrofusion in an arc furnace. The thermal expansion properties of Al2TiO5 composites show the hysteresis due to the strong anisotropy of The crystal axes of these material. These phenomena are ex-plained by the opening and closing of microcracks. The difference in microcracking temperatures e.g 587.6(ATG2), 405.9(ATG3) and 519.7$^{\circ}C$(ATG4) is caused by the difference in grain size and stabilizer type. The thermal shock behaviour under cyclic conditions between 750-1400-75$0^{\circ}C$ show no change in mi-crostructure and phase assemblage for all three stabilized specimens. After the thermal loading test at 110$0^{\circ}C$ for 100hrs. ATG1 and ATG2 materials decomposes completely to its components corundum and ru-tile in both cases. However with approximatelly 20% retention of the Al2TiO5 Thus in order to prevent decomposition of the stabilized material in the critical temperature range 800-130$0^{\circ}C$ it must be traversed within a short period of time.

• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.277-283
• /
• 2012

This study conducted analysis of paint samples from a streetcar No. 381 (Registration Cultural Property No. 467) to identify the characteristics of the modern paint. The samples were analyzed by Microscopic observation, infrared spectroscopy and SEM-EDS. The upper part is consist of 26 layers and the under part is 29 layers. And the layers were painted various thickness from $10{\mu}m$ to $100{\mu}m$, and confirmed that several color had been used. The putty was used for surface treatment before painting. According to the results of infrared spectroscopy, paint specimens were identified as alkyd resin. Some bands such as C-H and C=O stretcing, aromatic, C-H bending, C-O stretching were found in spectra. Inorganic analysis showed that gold color on the surface was used copper-based paint. And type of the putty was lacquer-putty that was consist of kaolin, talc and zinc white.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.418-428
• /
• 2007

Physical and chemical properties of the aggregate by-products including sludge and crushed dust samples collected from the 21 private companies throughout the country were analyzed to evaluate possible usage of the by-products as artificial soil materials for plantation. The pH of the materials ranged from 8.0 to 11.0. The organic matter content was $2.85g\;kg^{-1}$, and the total nitrogen content and available phosphate content were low as 0.7 percents and $12.98mg\;kg^{-1}$, respectively. Exchangeable $Ca^{2+}$, $Mg^{2+}$, $K^+$, and $Na^+$ were 2.29, 0.47, 0.02 and $0.05cmol\;kg^{-1}$, respectively. Heavy metal contents were lower than the limits regulated by environmental law of Korea. Textural analysis showed that most of the materials were silt loam with low water holding capacity ranged from 0.67 to 7.41 percents, and with low hydraulic conductivity ranged from 0.4 to $2.8m\;s^{-1}$. Mineralogical analysis showed that the aggregate by product materials were mostly composed of silicate, alumina and ferric oxides except calcium oxide dominant materials derived from limestones. The primary minerals were quartz, feldspars and dolomites derived from granite and granitic gneiss materials. Some samples derived from limestone material showed calcite and graphite together with the above minerals. According to the result, it can be concluded that the materials could be used as the artificial soil material for plantation after proper improvement of the physico-chemical properties and fertility.

• Korean Journal of Materials Research
• /
• v.20 no.8
• /
• pp.444-449
• /
• 2010

Transparent ceramics are used in new technology because of their excellent mechanical properties over glasses. Transparent ceramics are nowadays widely used in armor, laser windows, and in high temperature applications. Silicon nitride ceramics have excellent mechanical properties and if transparent silicon nitride is fabricated, it can be widely used. h-BN has a lubricating property and is ductile. Therefore, adding h-BN to silicon nitride ceramics gives a lubricating property and is also machinable. Translucent silicon nitride was fabricated by hot-press sintering (HPS) and 57% transmittance was observed in the near infrared region. A higher wt. % of h-BN in silicon nitride ceramics does not favor transparency. The optical, mechanical, and tribological properties of BN dispersed polycrystalline $Si_3N_4$ ceramics were affected by the density, ${\alpha}:{\beta}$-phase ratio, and content of h-BN in sintered ceramics. The hot pressed samples were prepared from the mixture of $\alpha-Si_3N_4$, AlN, MgO, and h-BN at $1850^{\circ}C$. The composite contained from 0.25 to 2 wt. % BN powder with sintering aids (9% AlN + 3% MgO). A maximum transmittance of 57% was achieved for the 0.25 wt. % BN doped $Si_3N_4$ ceramics. Fracture toughness increased and wear volume and the friction coefficient decreased with an increase in BN content. The properties such as transmittance, density, hardness, and flexural strength decreased with an increase in content of h-BN in silicon nitride ceramics.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.1
• /
• pp.22-29
• /
• 2015

The objectives of this study were to monitor the changes in soil solution nutrients and to evaluate their effect on rice uptake and yield. The changes of chemical characteristics of paddy soil solution were examined from the 58th fertilization experiment in which the continuous rice cropping experiment started in 1954 at the National Academy of Agricultural Science. The treatments were no fertilization (No fert.), inorganic fertilization (NPK), inorganic fertilizer plus rice straw compost (NPKC) and inorganic fertilizer plus silicate and lime fertilizer as a soil amendment (NPKCLS). The fertilizers were added at rates of standard fertilizer application rate in which nitrogen (N), phosphate ($P_2O_5$), potassium ($K_2O$), and sililcate ($SiO_2$) were applied at rates of $75{\sim}150kg\;ha^{-1}$, $70{\sim}86kg\;ha^{-1}$, $75{\sim}86kg\;ha^{-1}$, and $7.5Mg\;ha^{-1}$ respectively and lime was applied to neutralize soil acidity until 6.5. Average Electrical Conductivity (EC) of soil solution in NPKCLS and NPKC ranged from 1.16 to $2.00dS\;m^{-1}$. The $NH{_4}^+$ and $K^+$ levels in NPKCLS and NPKC were higher than that of the other treatments, due to high supply power of rice straw compost. The content of $H_3SiO{_4}^-$ was higher in NPKCLS because of silicate application. The dominant ions in soil solution were $Ca^{2+}$, $Mg^{2+}$ and $Na^+$ among cations and $HCO{_3}^-$, $SO{_4}^{2-}$, and $Cl^-$ among anions in all treatments. The continuous application of inorganic fertilizers plus rice straw compost (NPKC) and silicate fertilizer (NPKCLS) led to the changes of various chemical composition in soil solutions. Also, they had a significant impact on the improvement of rice inorganic uptake and grain yield. Especially, inorganic uptake by rice in NPKC and NPKCLS significantly increased than those in NPK plot; 14~46% for T-N, 32~36% for P, 43~57% for K, and 45~77% for Si. Therefore, the combined application of inorganic fertilizers with organic compost as a soil amendment is considered as the best fertilization practice in the continuous rice cropping for the improvement of crop productivity and soil fertility.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.1
• /
• pp.118-126
• /
• 2020

Silicon and phosphorus are elements that are beneficial for plant growth. Despite the abundant availability of silicate and phosphate in the Earth's crust, crop nutritional requirements for silicon and phosphorus are normally met through the application of fertilizer. However, fertilizers are one of the major causes of heavy metal pollution. In our study, we aimed to assess silicate and phosphate solubilization by the bacteria Enterobacter ludwigii GAK2, in the presence and absence of phosphate [Ca₃(PO₄)₂] or silicate (Mg₂O₈Si₃), to counteract cadmium stress in rice (Oryza sativa L). Our results showed that the GAK2-treated rice plants, grown in soil amended with phosphate [Ca₃(PO₄)₂] or silicate (Mg₂O₈Si₃), had significantly reduced cadmium content, and enhanced plant growth promoting characteristics including fresh shoot and root weight, plant height, and chlorophyll content. These plants showed significant downregulation of the cadmium transporter gene, OsHMA2, and upregulation of the silicon carrier gene, OsLsi1. Moreover, jasmonic acid levels were significantly reduced in the GAK2-inoculated plants, and this was further supported by the downregulation of the jasmonic acid related gene, OsJAZ1. These results indicate that Enterobacter ludwigii GAK2 can be used as a silicon and phosphorus bio-fertilizer, which solubilizes insoluble silicate and phosphate, and mitigates heavy metal toxicity in crops.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.4
• /
• pp.283-291
• /
• 2014

Talc ($Mg_3Si_4O_{10}(OH)_2$), one of sheet silicates, is soft and has been widely used in industry. Powdered talc specimen was synthesized at the pressure of 200 MPa and temperature of $600^{\circ}C$ using external heated hydrothermal high pressure apparatus. High pressure angular dispersive X-ray diffraction (ADXRD) mode experiments were performed at the Pohang Light Source (PLS) using the symmetrical diamond anvil cell (SDAC). Compression pressure was loaded up to 11.06 GPa at room temperature. This synthetic talc shows no phase transition(s) within the present pressure limit. Based on ADXRD data, bulk modulus of talc was calculated to be 72.4 GPa using Birch-Muranghan equation of state (EOS). This value is lower than that of natural talc determined previously.