• 한국전기전자재료학회논문지
• /
• 제24권10호
• /
• pp.834-838
• /
• 2011

This research shows the electrical characteristic using excellent epoxy nano-composite of MgO 5.0 wt% and $SiO_2$ 0.4 wt% in mechanical strength test depending on nano-additive. First of all, volume resistance depending on nano-additive and temperature using high resistance meter (HP. 4329A) by increasing 10, 100, 1,000 V of applying voltage was measured. Moreover, temperature range of $25{\sim}120^{\circ}C$ with virgin sample was tested using TO-9B oven by Ando Company. The result showed that virgin and the samples added with MgO and $SiO_2$ had similar value of volume resistance in low temperature and low electric field region and reduced with slow slope. The nano-composite's volume resistance of sample added with MgO and $SiO_2$ had higher value than virgin sample's volume resistance in high temperature region more than $80^{\circ}C$. Moreover, the slope has steeply reduced. The volume resistance of sample added with MgO 5.0 wt% was $8.38{\times}10^{13}\;{\Omega}{\cdot}cm$ and it was 6.8 times more than virgin sample in high temperature at $120^{\circ}C$. The insulation characteristics were constant although filler has changed in low temperature region. But, in high temperature region, the value of volume resistance of sample with MgO 5.0 wt% was 7.6 times more than the virgin sample's volume resistance.

• 청정기술
• /
• 제29권1호
• /
• pp.39-45
• /
• 2023

To investigate the effects of Mg addition at different aging times and temperatures, Cu/MgO/Al₂O₃ catalysts were synthesized for the low-temperature water gas shift (LT-WGS) reaction. The co-precipitation method was employed to prepare the catalysts with a fixed Cu amount of 30 mol% and varied amounts of Mg/Al. Synthesized catalysts were characterized using XRD, BET, and H₂-TPR analysis. Among the prepared catalysts, the highest CO conversion was achieved by the Cu/MgO/Al₂O₃ catalyst (30/40/30 mol%) with a 60 ℃ aging temperature and a 24 h aging time under a CO₂-rich feed gas. Due to it having the lowest reduction temperature and a good dispersion of CuO, the catalyst exhibited around 65% CO conversion with a gas hourly space velocity (GHSV) of 14,089 h-1 at 300 ℃. However, it has been noted that aging temperatures greater or less than 60 ℃ and aging times longer than 24 h had an adverse impact, resulting in a lower surface area and a higher reduction temperature bulk-CuO phase, leading to lower catalytic activity. The main findings of this study confirmed that one of the main factors determining catalytic activity is the ease of reducibility in the absence of bulk-like CuO species. Finally, the long-term test revealed that the catalytic activity and stability remained constant under a high concentration of CO₂ in the feed gas for 19 h with an average CO conversion of 61.83%.

• 한국세라믹학회지
• /
• 제20권1호
• /
• pp.19-24
• /
• 1983

Dielectrics used as capacitor was studied in the system of $Pb(MgW)_{0.5} O_3-PbTiO_3-PbZrO_3$ Curie tempera-tures of $PbTiO_3 PbZrO_3$ and $Pb[MgW]_{0.5} O_3$ were 49$0^{\circ}C$ 23$0^{\circ}C$ and 39$0^{\circ}C$ respectively. When these materials formed solid solution the more amount of $Pb(MgW)_{0.5}O_3$ was increased the more Curie temperature lowered and dielectric constant increased. Higher dielectric constants were measured in the solid solution of which X-Ray diffraction patterns were changed. Especially Curie temperature and dielectric constant were 85$^{\circ}C$ and 4159 respectively in the composition of 60 $Pb(MgW)_{0.5}O_3-30 PbTiO_3-10PbZrO_3$. Also in this composition ferroeletric material with thermal stability was obtained.

• 자원리싸이클링
• /
• 제24권1호
• /
• pp.35-42
• /
• 2015

본 연구는 건식제련법으로 폐 PCB를 처리하는 공정에서 슬래그 중 Ni의 용해거동에 대한 기초연구로서, CaO-$SiO_2-Al_2O_3$-MgO계 슬래그와 Cu-5 wt%Ni합금 사이의 Ni 분배거동을 1623~1823 K의 $CO_2$-CO 분위기 중에서 조사하였다. 평형산소분압이 증가할수록 Ni의 분배비는 선형적으로 증가하였으며, 이 결과로부터 Ni의 슬래그 중 용해반응은 다음과 같이 나타낼 수 있다. $$Ni(l)_{metal}+\frac{1}{2}O_2(g)NiO(l)_{slag}$$ 슬래그 중 염기성 산화물(CaO와 MgO)의 농도가 증가할수록 Ni의 분배비는 선형적으로 증가하였다. 그러나 반응 온도가 높을수록 Ni의 분배비는 선형적으로 감소하였다. 이러한 결과로부터 Ni의 분배비에 미치는 실험변수의 영향을 다중 회귀분석하여 다음과 같은 경험식을 얻었다. $${\log}L_{Ni}=0.4000{\log}P_{O2}-5.1{\times}10^{-4}T+0.3375\(\frac{X_{CaO}+X_{MgO}}{X_{SiO2}}\)$$

• 한국세라믹학회지
• /
• 제24권4호
• /
• pp.321-328
• /
• 1987

The chemical durability of six alumino fluorophosphate glass samples studied. The composition of glass varied with MgF2 content from 0 to 12.5wt% in 30AlF3-2MgF2-(50-x)MF2-10P2O5(M; Sr, Ba). Samples were maintained in distilled water at 95$^{\circ}C$ from 1 to 100hrs. Weight loss, pH change and leached elements of the solution, and IR transmittance of samples were measured and also their surfaces were observed by SEM. Chemical durabilities of these samples were increased with increasing MgF2 contents. The following various properties were increased rapidly up to 10 hours after that changed slowly. The sample after leached at 95$^{\circ}C$ during 100 hrs showed 0.5mg/$\textrm{cm}^2$ in weight loss. The pH of leached solution is 6.2 and concentration of Mg, Sr, and Ba element of that leached solution were 24,115 and 125 ppm, respectively. The infrared transmittance of leached sample decreased 7% compare to unleached one. And also SEM photomicrograph and EDS analysis showed that the corrosion of samples were decreased with respect to increasing MgF2 content.

• 한국세라믹학회지
• /
• 제35권3호
• /
• pp.287-293
• /
• 1998

The effects of B2O3 addition on the sintering behavior and th microwave dielectric properties of $(Mg_{0.93}Ca_{0.07})TiO_3$ ceramics were investigated. By addition of $B_2O_3$, increases the density of the ceramics increases and grain growth enhances, It was densified to over 94% of $(Mg_{0.93}Ca_{0.07})TiO_3$ theoretical density by the addition of 0.15-1.0wt% B2O3 and stable microwave dielectric properties observed by the addition of 0.2-0.4wt% $B_2O_3.\;(Mg_{0.93}Ca_{0.07})TiO_3$ ceramics sintered at $1200^{\circ}C$ exhibits maximum dielectric constants of 24-25 quality factor($Q{\times}f$) of more than 70000 and temperature coefficient of resonant frequency of $0\;ppm/^{\circ}C$ by adding of 0.15-0.4wt% $B_2O_3$.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.277-277
• /
• 2015

본 연구는 퍼클로레이트의 생물학적 환원 과정에 있어서 나이트레이트의 존재가 미생물에게 어떤 영향을 미치는지를 실험을 통해서 알아보고 적절한 모델링 접근을 통하여 나이트레이트의 퍼클로레이트 환원에 대한 저해의 정량적 분석을 위한 요소들을 도출하기 위해 수행되었다. 100mL 합성폐수를 포함하는 플라스크를 이용한 실험이 수행되었고, 유일 탄소원으로 아세트산나트륨이 사용되었고, 전자수용체로는 퍼클로레이트와 나이트레이트가 사용되었다. 먼저 퍼클로레이트와 나이트레이트 각각을 단일전자수용체로서 넣은 실험을 진행하였다. 퍼클로레이트의 동역학계수 qmax, Ks, Y, b값은 각각 0.9(mgClO4-/mgMLSSday), 42.28(mgClO4-/L), 0.382(mgClO4-/mgMLSS), 0.05(day-1)로 계산되었다. 그리고 나이트레이트의 동역학 계수 qmax, Ks, Y, b값은 각각 13.81(mgNO3-/mgMLSSday), 239.78(mgNO3-/L), 0.275(mgNO3-/mgMLSS), 0.05(day-1)로 계산되었다. 나이트레이트와 퍼클로레이트를 동시에 넣었을 경우에는 나이트레이트의 동역학 계수는 qmax, Ks, Y, b 값은 각각 13.72(mgClO4-/mgMLSSday), 235.64(mgClO4-/L), 0.263(mgClO4-/mgMLSS), 0.05(day-1)로 큰차이 없었으나, 퍼클로레이트의 경우에는 qmax, Ks, Y, b값은 각각 0.6(mgClO4-/ mgMLSSday), 42.24(mgClO4-/L), 0.393(mgClO4-/mgMLSS), 0.05(day-1)로 qmax값은 감소하였고, Y값은 증가하는 모습을 보임으로써, 나이트레이트의 존재가 퍼클로레이트의 환원을 저해시키는 것을 확인할 수 있었다.

• 한국재료학회지
• /
• 제24권12호
• /
• pp.658-662
• /
• 2014

$Eu^{2+}/Dy^{3+}$-doped $Sr_2MgSi_2O_7$ powders were synthesized using a solid-state reaction method with flux ($NH_4Cl$). The broad photoluminescence (PL) excitation spectra of $Sr_2MgSi_2O_7:Eu^{2+}$ were assigned to the $4f^7-4f^65d$ transition of the $Eu^{2+}$ ions, showing strong intensities in the range of 375 to 425 nm. A single emission band was observed at 470 nm, which was the result of two overlapping subbands at 468 and 507 nm owing to Eu(I) and Eu(II) sites. The strongest emission intensity of $Sr_2MgSi_2O_7:Eu^{2+}$ was obtained at the Eu concentration of 3 mol%. This concentration quenching mechanism was attributable to dipole-dipole interaction. The $Ba^{2+}$ substitution for $Sr^{2+}$ caused a blue-shift of the emission band; this behavior was discussed by considering the differences in ionic size and covalence between $Ba^{2+}$ and $Sr^{2+}$. The effects of the Eu/Dy ratios on the phosphorescence of $Sr_2MgSi_2O_7:Eu^{2+}/Dy^{3+}$ were investigated by measuring the decay time; the longest afterglow was obtained for $0.01Eu^{2+}/0.03Dy^{3+}$.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1241-1248
• /
• 2018

The reactive wetting behaviors of molten Zn-Al-Mg alloys on MnO- and amorphous (a-) $SiO_2$-covered steel sheets were investigated by the sessile drop method, as a function of the Al and Mg contents in the alloys. The sessile drop tests were carried out at $460^{\circ}C$ and the variation in the contact angles (${\theta}_c$) of alloys containing 0.2-2.5 wt% Al and 0-3.0 wt% Mg was monitored for 20 s. For all the alloys, the MnO-covered steel substrate exhibited reactive wetting whereas the $a-SiO_2$-covered steel exhibited nonreactive, nonwetting (${\theta}_c>90^{\circ}$) behavior. The MnO layer was rapidly removed by Al and Mg contained in the alloys. The wetting of the MnO-covered steel sheet significantly improved upon increasing the Mg content but decreased upon increasing the Al content, indicating that the surface tension of the alloy droplet is the main factor controlling its wettability. Although the reactions of Al and Mg in molten alloys with the $a-SiO_2$ layer were found to be sluggish, the wettability of Zn-Al-Mg alloys on the $a-SiO_2$ layer improved upon increasing the Al and Mg contents. These results suggest that the wetting of advanced high-strength steel sheets, the surface oxide layer of which consists of a mixture of MnO and $SiO_2$, with Zn-Al-Mg alloys could be most effectively improved by increasing the Mg content of the alloys.

• 한국결정학회지
• /
• 제4권2호
• /
• pp.74-85
• /
• 1993

Lithium niobate(LiNbO3) 단결정은 유전성, 압전성, 초전성, 비선형 광학 및 선형 전기광학 물질로서 다양한 응용 성을 가지고 있으므로 전기와 광학장치로 널리 사용되어지고 있다. 그러나 LiNbo3 단결정이 레이저를 이용한 광학장치로 응용될 때 레이저광의 세기에 따라 상굴절(ne)과 이상굴절(no)이 불규칙하게 변하는 장손상이 발생하여 비선 형 광학소자로의 이용에 한계가 있음이 밝혀졌다. 1980년 Zhong등이 LiNbO3에 MgO를 4.5mol% 첨가한 MgO:LiNbO3단결정을 성장시켜 물성을 조사한 결과 광손 상이 현저하게 감소된다고 발표한 후 이 분야의 연구가 활발히 진행되고 있다. 본 연구에서는 순수한 LiNbO3 단결정의 최적 성장조건인 congrugnt한 LiNbOs(Li/Nb=0.486)에 MgO를 0, 2.5, 5.0, 7.5, 10.0 mol% 첨가시킨 MgO:LiNb03 단결정을 Czochalski법으로 성공적으로 성장시켰다. 결정성장은 성장온도 1250℃ 근방에서 회전속도 15rpm 인상속도 2.85 ∼3.25 mm/hr로 하였으며 냉각율은 30℃/hr이다. 성장시킨 단결정의 X-ray 회절실험과 편광현미경의 conoscope상 관찰로 양질의 MgO:LiNbO3 단결정이 성장되었음을 확인하였다. c축에 수직되게 절단한 c-pltae 시료 중 MgO가 첨가된 MgO:LiNb03 시료에서 나이테 형태의 둥근 원무늬가 나타나고 있다. 이 현상은 결정성장시 공기 중의 산소분압에 의해 MgO:LiNbO3 의 용융상태에서 MgO가 균일하게 분포되지 못하기 때문에 나타난 것으로 해석 된다. MgO 첨가량에 따른 MgO:LiNbo3 단결정의 결정 결함 구조를 조사하기 위하여 밀도측정을 하였다. MgO:LiNbO3 단결정의 밀도는 MgO론 2.5mol% 첨가한 시료에서 감소 하다가 5.0mol% 첨가한 시료에서 다시 증가하였으며 5.0mol%이상에서는 다시 감소하였다. 이 실험결과로 MgO 첨가량에 따른 결정 결함구조를 점 결함 모형 (point defect medel)으로 해석하였다.