• Journal of Plant Biotechnology
• /
• v.50
• /
• pp.155-162
• /
• 2023

Radish (Raphanus sativus L.), a root vegetable grown worldwide, is consumed in several ways. In the cross between parental lines to produce F1 seeds of radish, the problem of low purity may arise because of pollen contamination. Therefore, we aimed to establish conditions for callus induction and regeneration so that in vitro cultured plants could be used for the propagation of stock seeds. The most effective hormone combination containing various concentrations of 2,4-D, TDZ, and kinetin was selected for callus induction using radish hypocotyl, and the induced calli were transferred to two types of hormone media to investigate the optimal conditions for shoot regeneration of the callus. The combination of 1 mg/L 2,4-D + 0.05 mg/L kin was the most effective for callus induction of RA2 and RA10, 1 mg/L 2,4-D + 0.1 mg/L kin + 0.025 mg/L TDZ of RA4, and 1 mg/L 2,4-D + 0.2 mg/L kin of RA30. Shoot regeneration of the RA4 callus occurred in both shoot regeneration media, but the frequency was much higher in the 5H+1B medium (1 mg/L NAA + 0.1 mg/L 2,4-D + 1 mg/L IPA + 0.02 mg/L GA3 + 2 mg/L zeatin + 1 mg/L BA). For the in vitro micropropagation of radish, the conditions selected in this study can assist in the propagation and maintenance of stock seeds to produce F1 seeds.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.2
• /
• pp.19-25
• /
• 2002

Glass composed of $Li_2$O.MgO. $MgF_2$.$SiO_2$.$B_2O_3$ for the fabrication of green sheet was prepared by melting process, and glass ceramics was prepared by the process of nucleation and grystal growth for the glass of $Li_2$O.MgO. $MgF_2$.$SiO_2$.$B_2O_3$ system with Lithium fluorhectorite and Lithium boron fluorphlogopite crystal phase. Powderization of the glass ceramics was carried out by water swelling. The average particle size at this point was 2.574 $\mu\textrm{m}$. Slurry was prepared for green sheet using high viscous sol fabricated by water swelling, which shows cleavage phenomenon in prepared glass ceramics. The optimum ratio of powder to water for the tape casting was 18:100, and its viscosity was 11,000~14,000 cps.

• Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.317-322
• /
• 2011

This study was conducted to develop economical agricultural fertilizer media for the mass culturing of Nannochloropsis oceanica. Specific growth rates of N. oceanica cultured with differing concentrations of commercial compounds, urea fertilizers, and trace elements (Zn, Cu, Co, Mo) were compared with the growth rate in f/2 medium. Among the various added trace elements, $CuSO_4{\cdot}5H_2O$ was most effective for high growth of N. oceanica. The main nitrogen source in the agricultural fertilizers was ammonium, which was unsuitable for the growth of N. oceanica. Thus, the fertilizer at a lower concentration infused with $NaNO_3$ as a nitrogen source was more effective than fertilizer at higher concentrations. In this study, the growth of N. oceanica cultured with an agricultural fertilizer medium composed of compound fertilizer (41.7 mg/L), urea fertilizer (34.4 mg/L), $NaNO_3$ (150 mg/L), and $CuSO_4{\cdot}5H_2O$ (0.0588 mg/L) was similar to that of N. oceanica cultured in f/2 medium.

• Plant Biotechnology Reports
• /
• v.4 no.1
• /
• pp.23-27
• /
• 2010

Quantitative trait loci (QTLs) controlling ability of somatic embryogenesis were identified in soybean. A frame map with 204-point markers was developed using an RI population consisting of 117 $F_{11}$ lines derived from a cross between cultivar 'Keburi' and a weedy soybean 'Masshokutou Kou 502'. The parents differed greatly in their abilities of somatic embryogenesis using immature cotyledons as explants. The ability of somatic embryogenesis was evaluated in five different experiments: the $F_{11}$ (evaluated in 1998) and $F_{15}$ (2002) generations cultured on basal media supplemented with $40\;mg\;l^{-1}$ 2,4-D (2,4-D1998 and 2,4-D2002), $F_{14}$ (2001) generation on medium with $40\;mg\;l^{-1}$ 2,4-D and high sucrose concentration [2,4-D2001 ($30\;g\;l^{-1}$ sucrose)], and the $F_{11}$ (1998) and $F_{12}$ (1999) generations on medium with $10\;mg\;l^{-1}$ NAA (NAA1998 and NAA1999). The RILs showed wide and continuous variations in each of the five experiments. In the composite interval mapping analysis, 2 QTLs were found in group 8 (D1b + W, LOD = 5.42, $r^2$ = 37.5) in the experiment of 2,4-D1998 and in group 6 (C2, LOD = 6.03, $r^2$ = 26.0) in the experiment of 2,4-D2001 (high concentration sucrose). In both QTLs, alleles of 'Masshokutou Kou 502' with high ability of somatic embryogenesis contributed to the QTLs. For the other three experiments, no QTL was detected in the criteria of LOD >3.0, suggesting the presence of minor genes.

• Korean Journal of Materials Research
• /
• v.29 no.2
• /
• pp.129-135
• /
• 2019

A powder mixture of 70 wt% $Al_2O_3$ and 30 wt% hydroxyapatite (HA) is sintered at $1300^{\circ}C$ or $1350^{\circ}C$ for 2 h at normal pressure. An $MgF_2$-added composition to make HA into fluorapatite (FA) is also prepared for comparison. The samples without $MgF_2$ show ${\alpha}$ & ${\beta}$-tricalcium phosphates (TCPs) and $Al_2O_3$ phases with no HA at either of the sintering temperatures. In the case of $1,350^{\circ}C$, a $CaAl_4O_7$ phase is also found. Densification values are 69 and 78 %, and strengths are 156 and 104 MPa for 1,300 and $1,350^{\circ}C$, respectively. Because the decomposition of HA produces a $H_2O$ vapor, fewer large pores of $5-6{\mu}m$ form at $1,300^{\circ}C$. The $MgF_2$-added samples show FA and $Al_2O_3$ phases with no TCP. Densification values are 79 and 87 %, and strengths are 104 and 143 MPa for 1,300 and $1,350^{\circ}C$, respectively. No large pores are observed, and the grain size of FA ($1-2{\mu}m$) is bigger than that of TCP ($0.7{\mu}m{\geq}$) in the samples without $MgF_2$. The resulting $TCP/Al_2O_3$ and $FA/Al_2O_3$ composites fabricated in situ exhibit strengths 6-10 times higher than monolithic TCP and HA.

• Korean Journal of Materials Research
• /
• v.21 no.3
• /
• pp.168-173
• /
• 2011

Precipitation of the ordered icosahedral quasicrystal in Mg-6wt%Zn-1wt%Y alloy has been characterized by transmission electron microscopy observations. The lamellar-type icosahedral qusicrystal phases (I-phase) with the face-centered icosahedral (FCI) structure are observed in alloy after solution treatment at $550^{\circ}C$. In the alloy annealed at $400^{\circ}C$, polygon-shaped I-phases are observed in the ${\alpha}$-Mg matrix. The interfaces of the I-phase with the matrix are facetted and the facets are on five-fold and two- fold plane of the I-phase. The orientation relationship of the I-phase with the matrix is determined to be $[I5]_I//[001]_{Mg}$, $(2f)_I//(2\overline{1}0)_{Mg}$ and $[I2]_I//[311]_{Mg}$, $(5f)_I//(0\overline{1}1)_{Mg}$. The icosahedral grains are occasionally found to be twinned with one of the five-fold axis as the twin axis. The twin boundaries appear to be fairly straight and perpendicular to the fivefold twin axis. The icosahedral twin can be expressed as a rotation of $63.4^{\circ}$ or $116.62^{\circ}$ around two fold zone axis.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.86-87
• /
• 2004

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.208-209
• /
• 2004

• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.847-854
• /
• 1994

An amorphous single phase and coexistent amorphous and hcp-Mg phases in Mg-Zn-Ce system were found to form in the composition ranges of 20 to 40% Zn, 0 to 10% Ce and 5 to 20% Zn, 0 to 5% Ce, respectively. A $Mg_{85}Zn_{12}Ce_{3}$ amorphous alloy containing nanoscale hcp-Mg particles was found to form either by melt spinning or by heat treatment of melt -spun ribbon. The particle size of the hcp-Mg phase can be controlled in the range of 4 to 20 nm. The mixed phase alloy prepared thus has a good bending ductility and exhibits high ultimate tensile strength($\sigma_{B}$) ranging from 670 to 930 MPa and fracture elongation($\varepsilon_{f}$) of 5.2 to 2.0%. The highest specific strength($\sigma_{B}$/density =$\sigma_{s}$)$3.6 \times 10^5N \cdot m/kg$. It should be noted that the highest values of flB, US and ？1 are considerably higher than those (690MPa,$2.5 \times 10^5N \cdot m/kg$and 2.5%) for amorphous Mg-Zn-Ce alloys. The increase of the mechanical strengths by the formation of the mixed phase structure is presumably due to a dispersion hardening of the hcp supersaturated solution which has the hardness higher than that of the amorphous phase with the same composition.

• Journal of Plant Biotechnology
• /
• v.43 no.4
• /
• pp.492-499
• /
• 2016

This study assessed the whitening and anti-aging effects of the Cistanche deserticola extract, to develop a cosmetic substance. The cell viability of the Cistanche deserticola extract was evaluated in B16F10 melanoma cells by the MTT (3-(4,5-dimethylthaiazol-2-yl)-2,5-diphenyl tetrazolium bromide) assay. The cell viability of the extract was determined to be 90% at 4mg/ml concentration. Furthermore, the tyrosinase, collagenase, and elastase mRNA expression level were measured by RT-PCR, using the Cistanche deserticola extract treated B16F10 melanoma cells. At 4 mg/ml concentration, mRNA expression level of tyrosinase, collagenase, and elastase was dramatically decreased to 80.9%, 37.6%, and 70.9%, respectively. The antioxidant activity of the Cistanche deserticola extract was determined by DPPH free radical scavenging. The DPPH free radical scavenging capacities ranged from 70.6% to 82.6%, when evaluated from 2 mg/ml to 10mg/ml concentrations. The effects of whitening and anti-aging of the Cistanche deserticola extracts were examined at 2, 4, 6, 8, and 10 mg/ml concentration. Tyrosinase activities were inhibited from 66.8% to 78.5%, elastase activities were inhibited from 67.6% to 79.3%, collagenase activities were inhibited from 72.3% to 83.6%, and hyaluronidase activities were inhibited from 65.8% to 69.2%, respectively. These data suggest that the Cistanche deserticola extract is effective in whitening and anti-aging; therefore, it is considered to be a functional cosmetic material in cosmetic products.