• Journal of the Korean Electrochemical Society
• /
• v.15 no.4
• /
• pp.207-215
• /
• 2012

Soft carbons are prepared by heat-treatment of cokes with different amounts of phosphoric acid (2, 4.5, and 10 wt% vs. cokes) at $900^{\circ}C$ to be used as anode materials for lithium ion batteries. From electrochemical measurements combined with structural analyses, we confirm that abundant nano-pores are existed in the microstructure of soft carbons prepared with the phosphoric acid, which are responsible for further lithium ion storage. Significant increase in reversible capacity of soft carbon is attained in proportion to added amount of the phosphoric acid. We also demonstrate the effect of structural modification with phosphoric acid on electrochemical performance of soft carbon to elucidate the origin of additional capacity.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.141-144
• /
• 2003

Proton conducting polymeric gels as the electrolytes of electrochemical capacitors have been prepared by two different methods: 1) swelling a polymethacrylate-based polymer matrix in aqueous solutions of inorganic and organic acids, and 2) polymerizing complexes of anhydrous acids and prepolymers with organic plasticizer. The FT-IR spectra strongly suggest that the carbonyl groups in the polymer matrix interact with protons from the doped acids. High ionic (proton) conductivity in the range of $6\times10^{-4}-4\times10^{-2}\;S\;cm^{-1}$ was obtained at room temperature for the aqueous gels. The non-aqueous polymer complexes showed rather low ionic conductivity, but it was about $10^{-3}\;S\;cm^{-1}\;at\;70^{\circ}C$ for the $H_3PO_4$ doped polymer electrolyte. The mechanisms of ion (proton) conduction in the polymeric systems are discussed.

• Journal of Powder Materials
• /
• v.31 no.1
• /
• pp.23-29
• /
• 2024

This study investigates the effect of the microstructure of Li_1.3Al_0.3Ti_1.7(PO₄)₃ (LATP), a solid electrolyte, on its ionic conductivity. Solid electrolytes, a key component in electrochemical energy storage devices such as batteries, differ from traditional liquid electrolytes by utilizing solid-state ionic conductors. LATP, characterized by its NASICON structure, facilitates rapid lithium-ion movement and exhibits relatively high ionic conductivity, chemical stability, and good electrochemical compatibility. In this study, the microstructure and ionic conductivity of LATP specimens sintered at 850, 900, and 950℃ for various sintering times are analyzed. The results indicate that the changes in the microstructure due to sintering temperature and time significantly affect ionic conductivity. Notably, the specimens sintered at 900℃ for 30 min exhibit high ionic conductivity. This study presents a method to optimize the ionic conductivity of LATP. Additionally, it underscores the need for a deeper understanding of the Li-ion diffusion mechanism and quantitative microstructure analysis.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.3
• /
• pp.193-197
• /
• 1973

1. Two desert perennial plant species (Lycium andersonii Gray and Atriplex confertifolia (Torr. & Frem) Wats.) were grown in soil in a glasshouse with different sources of Na ($NO_3{^-}$, $Cl^-$, $H_2PO_4{^-}$) to evaluate their effects upon cation-anion balance in the plants. 2. Each anion greatly increased in leaf with only minor, if any, interactions with other anions 3. The miliequivalent sum of anions measured (N. P. Cl), increased in each plant part with the soil applications. 4. Simultaneously there were usually modest increases in the me. sum of cations. 5. The cation-anion ratio was decreased markedly when $NaNO_3$ was added. The ratio was usually over one. 6. Maximum content of Cl and N in leaves with L. andersonii. was 13.5%, and 6.37% respectively, when each was added. 7. Sodium concentrations were higher for the Atriplex species than for L. andersonii. 8. There were some compensations among other cations as sodium was increased, so that a somewhat constant sum of cations was maintained although there were significant differences among different sources of Na. 9. L. andersonii appeared to be an accumulator of Li.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.255-257
• /
• 2018

본 논문은 리튬폴리머 배터리를 입력 전압원으로 High-Altitude Electomagnetic Pulse (HEMP) 구동용 고밀도 고전압 충전기의 설계를 다루며, 제안하는 충전기는 독특한 3상 델타-와이 변압기 구조를 갖는 5.4kW 용량의 LCC 공진 컨버터로 제작 되었다. 풀브릿지 형태로 4개의 스위치를 사용하는 단상 충전기는 동일 용량을 설계하는 경우, 입력 전류량이 높아 소자의 발열로 충전기의 동작 시간이 제한되고 누설 인덕턴스에 의한 스파이크성 전압이 크게 발생하여 충전기의 안정적인 구동이 어려운 문제점이 있다. 이를 해결하기 위해 6개의 스위치를 사용하는 삼상 충전기를 HEMP 구동용 고밀도 고전압 충전기에 적용하였다. 동일 용량의 단상과 삼상 충전기 설계과정과 시뮬레이션 결과를 분석해 각 충전기의 차이점을 비교하고, 저항 및 커패시터 부하 실험으로 제안하는 삼상 충전기의 동작과 성능을 검증하였다.

• Spatial Information Research
• /
• v.14 no.1 s.36
• /
• pp.129-150
• /
• 2006

Mineral potential mapping is an important procedure in mineral resource assessment. The purpose of this study is to analyze mineral potential using weight of evidence model and a Geographic Information System (GIS) environment to identify areas that have not been subjected to the same degree of exploration. For this, a variety of spatial geological data were compiled, evaluated and integrated to produce a map of potential mineral in the Gangreung area, Korea. for this, a spatial database considering mineral deposit, topographic, geologic, geophysical and geochemical data was constructed for the study area using a GIS. The used mineral deposits were non-metallic(Kaolin, Porcelainstone, Silicastone, Mica, Nephrite, Limestone and Pyrophyllite) deposits of sedimentary type. The factors relating to mineral deposits were the geological data such as lithology and fault structure, geochemical data, including the abundance of Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Si, Sr, V, Zn, $Cl^-,\;F^-,\;{PO_4}^{3-},\;{NO_2}^-,\;{NO_3}^-,\;SO_{42-}$, Eh, PH and conductivity and geophysical data, including the Bouguer and magnetic anomalies. These factors were used with weight of evidence model to analyze mineral potential. Probability models using the weight of evidence were applied to extract the relationship between mineral deposits and related factors, and the ratio were calculated. Then the potential indices were calculated by summation of the likelihood ratio and mineral potential maps were constructed from Geographic Information System (GIS). The mineral potential maps were then verified by comparison with the known mineral deposit areas. The result showed the 85.66% in prediction accuracy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.542-545
• /
• 2002

High performance organic electroluminescnet(EL) devices which are composed of organic thin multilayer films are fabricated. The basic structure is ITO/Emitting layer/LiF/Al in which have a blended emitting layer. The emitting layer is consisted of a host material(N,N' diphenyl-N,N' (3-methyl phenyl)-l,l'-biphenyl-4,4'diamine)(TPD)) and a guest emitting material(poly(3-hexylthiophehe)(P3HT)). We think that the energy transfer in blending layer occurred from TPD to P3HT. Red emitting multilayer EL devices were fabricated using tris(8-hydroxyqunolinate) aluminum$(Alq_3)$ as electron transport material. The device structure of ITO/blending layer(TPD+P3HT)$/Alq_3$/LiF/Al was employed. In the Voltage-current-luminance characteristics of multilayer device, the device tum on at the 2V and the luminance of $10{\mu}W/cm^2$ obtain at l0V. Red emission peak at 640nm was observed with this device structure. We have presented evidence that the excitation energy migration between a polymeric host and guest has to be explained. And by using multilayer, the red light emitting EL device enhances not only Voltage-current-luminance characteristic but also stability of device.

• Journal of Oriental Neuropsychiatry
• /
• v.21 no.1
• /
• pp.59-69
• /
• 2010

Objectives: The study aims to look into how the application of EA(Electro-acupuncture) in the initial step of ischemic brain injury affects the changes in Bax and Caspase-3 expression among forebrain apoptosis. Methods: It caused GI by using common carotid artery occlusion and conducted the test by dividing into the no applied EA group after 6 hours and 12 hours, the LI 4 EA group that applied EA to LI4, and GV 20 EA group that was applied to GV 20. After that, the following results were obtained by comparing Bax and Caspase-3 expression, which were apoptosis-related factors, with its application time through immunohistochemical staining after extracting brain of each group. Results: According to each group's Bax expression by the application time, the order of expression increase after 6 hours is shown to be the no applied EA group, LI 4 group, and GV 20 group. The stimulation after 12 hours was most lowly expressed in the GV 20 group, and the no applied EA group and LI 4 group showed similar level. Conclusions: EA stimulation in the initial step after ischemia seems to affect positively Bax and Caspase-3 expression that are index of forebrain apoptosis.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1322-1332
• /
• 2019

In this paper, we systematically investigated the influence of some selected ligands on the U-phosphate precipitation induced by soil bacteria. These organics are widely ranging from acetate, lactate, salicylate and citrate to oxalate. The results revealed that uranium could be biomineralized on bacteria as $UO_2HPO_4{\cdot}4H_2O$ or $(UO_2)_3(PO_4)_2{\cdot}4H_2O$. The influence of organic ligands on the biomineralization had clear-cut correlations with its complexation abilities to uranyl. It was clearly found that the U-phosphate biomineralization was affected noticeably by the strong ligands (oxalate and citrate). Further study discovered that when the organic ligands were uncompetitive with biotic $PO_4^{3-}$ for uranyl, the transformation of uranyl species from ${\beta}-UO_2(OH)_2$ colloidal particles to free $UO_2^{2+}$-ligands ions could facilitate the U-phosphate biomineralization. However, when the organic ligands competed with biotic $PO_4^{3-}$ for uranyl, the U-phosphate biomineralization were inhibited. Our results highlight the importance of complex interactions of strong organic ligands with uranyl during the bacterial precipitation of U-P compounds and thus for the mobilization and immobilization of radio-nuclides in the nature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.228-231
• /
• 1999

The preparation and electrical properties of LIPON electrolyte were investigated in order to fabricate all solid state thin film battery. The LIPON thin film was deposited by r.f. sputtering of Li$_3$PO$_4$ target in O$_2$-N$_2$ mixtures. The LIPON deposited at N$_2$+10% O$_2$ ratio had a conductivity at 25 $^{\circ}C$ of 1.8${\times}$10$\^$-6/S/cm. The ion conductivity of the LIPON films decreased as the O$_2$ content of the process gas increased.