• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.713-716
• /
• 2001

In many papers, the electrochemical analysis of LiMn$_2$O$_4$shows the transition results of Mn$^{3+}$ ion. Charge ordering is accompanied by simultaneous orbital ordering due to the Jahn-Teller effect in Mnl$^{3+}$ ions. To analyze the cycle performance of LiMn$_{2-x}$Cu$_{x}$ O$_4$as the cathode of 4 V class lithium secondary batteries, XRD, TGA analysis were conducted. Although the cycle performance of the LiMn$_{2-x}$Cu$_{x}$ O$_4$was improved from pure LiMn$_2$O$_4$, the discharge capacity was significantly lower than LiCoO$_2$. In this paper, We study the Electrochemical characterization and enhanced stability of Cu-doped spinels in the LiMn$_{2-x}$Cu$_{x}$ O$_4$upon initial cycling.l cycling.

• Journal of Magnetics
• /
• 제19권3호
• /
• pp.210-214
• /
• 2014

The effects of manganese substitution on the crystallographic and magnetic properties of Li-Zn-Cu ferrite, $Li_{0.5}Zn_{0.2}Cu_{0.4}Mn_xFe_{2.1-x}O_4$ ($0.0{\leq}x{\leq}0.8$), were investigated. Ferrites were synthesized via a conventional ceramic method. We confirmed the formation of crystallized particles using X-ray diffraction, field emission scanning electron microscopy and $M{\ddot{o}}ssbauer$ spectroscopy. All of the samples showed a single phase with a spinel structure, and the lattice constants linearly decreased as the substituted manganese content increased, and the particle size of the samples also somewhat decreased as the doped manganese content increased. All the $M{\ddot{o}}ssbauer$ spectra can be fitted with two Zeeman sextets, which are the typical spinel ferrite spectra of $Fe^{3+}$ with A- and B-sites, and one doublet. The cation distribution was determined from the variation of the $M{\ddot{o}}ssbauer$ parameters and of the absorption area ratio. The magnetic behavior of the samples showed that an increase in manganese content led to a decrease in the saturation magnetization, whereas the coercivity was nearly constant throughout. The maximum saturation magnetization was 73.35 emu/g at x = 0.0 in $Li_{0.5}Zn_{0.2}Cu_{0.4}Mn_xFe_{2.1-x}O_4$.

• 전기화학회지
• /
• 제7권1호
• /
• pp.1-8
• /
• 2004

This paper deals with the recent development of high-voltage cathode materials of mono- and di- metal ions substituted spinel $LiMn_2O_4$ for lithium batteries. $LiCu_xMn_{2-x}O_4(0{\leq}x{\leq}0.5)$ shows reversible intercalation/deintercalation in two potential regions, $3.9\~43\;and\;4.8-5.0V$ and stable electrochemical cycling behavior but with low capacity. $LiNi_{0.5}Mn_{1.5}O_4$ obtained by a sol-gel process delivers a capacity of 127mAh $g^{-1}$ on the first cycle and sustains a value of 124 mAh $g^{-1}$ even after the 60th cycle. The $Li_xCr_yMn_{2-y}O_4(0{\leq}x{\leq}0.5)$ solid-solutions exhibit enhanced specific capacity, larger average voltage, and improved cycling behaviors for low Cr content. $LiCr_yMn_{2-y}O_4$ presents a reversible Li deintercalation process at 4.9V, whose capacity is proportional to the Cr content in the range of $0.25{\leq}x{\leq}0.5$ and delivers higher capacities. $LiM_yCr_{0.5-y}Mn_{1.5}O_4(M=Fe\;or\;Al)$ shows that the capacity retention is lowered compared with lithium manganate. The cumulative capacities obtainable with Al-substitutted materials are less than those with Fe-substituted materials. $LiCr_xNi_{0.5-x}Mn_{1.5}O_4(x=0.1)$ delivers a high initial capacity of 1$152mAh\;g^{-1}$ with excellent cycleability.

• 한국재료학회지
• /
• 제28권9호
• /
• pp.489-494
• /
• 2018

Lead free $(1-x)(0.675BiFeO_3-0.325BaTiO_3)-xLiTaO_3$ (BFBTLT, x = 0, 0.01, 0.02, and 0.03, with 0.6 mol% $MnO_2$ and 0.4 mol% CuO) were prepared by a solid state reaction method, followed by air quenching and their crystalline phase, morphology, dielectric, ferroelectric and piezoelectric properties were explored. An X-ray diffraction study indicates that lithium (Li) and tantalum (Ta) were fully incorporated in the BFBT materials with the absence of any secondary phases. Dense ceramic samples (> 92 %) with a wide range of grain sizes from $3.70{\mu}m$ to $1.82{\mu}m$ were obtained in the selected compositions ($0{\leq}x{\leq}0.03$) of BFBTLT system. The maximum temperatures ($T_{max}$) were mostly higher than $420^{\circ}C$ in the studied composition range. The maximum values of maximum polarization ($P_{max}{\approx}31.01{\mu}C/cm^2$), remnant polarization ($P_{rem}{\approx}22.82{\mu}C/cm^2$) and static piezoelectric constant ($d_{33}{\approx}145pC/N$) were obtained at BFBT-0.01LT composition with 0.6 mol% $MnO_2$ and 0.4 mol% CuO. This study demonstrates that the high $T_{max}$ and $d_{33}$ for BFBTLT ceramics are favorable for industrial applications.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.306-306
• /
• 2010

21 세기는 언제, 어디에서, 누구나가 정보를 자유롭게 염가에 이용할 수 있는 유비쿼터스 정보사회가 될 것으로 예상하고 있다. 이러한 유비쿼터스 사회가 실현되기 위해서는 필연적으로 대두되고 있는 과제가 에너지 공급원의 문제이다. 휴대용 전자제품이나 소형 에너지 공급원으로 지금까지 주로 전지가 사용되어 왔지만 이것들은 교환 및 충전이 불가피하다. 이러한 불편함을 개선하기위해 교환과 충전이 불필요하거나 아주 장시간동안 공급해주는 형태의 에너지 공급원의 필요성이 대두되고 있다. 이러한 에너지 공급원으로 최근에 많은 연구가 되고 있는 것이 주위의 환경으로부터 버려지는 에너지를 수확(harvesting)하여 전력으로 변환하는 에너지 하베스팅 (energy harvesting)기술이 연구 개발되고 있다. 에너지 하베스팅 응용을 위해서 사용되어지는 압전 세라믹스는 전압출력계수 ($g_{33}$)가 커야하는데 이것은 압전상수 ($d_{33}$)와 유전상수 (${\varepsilon}_{\tau}$)의 값에 영향을 받는 것으로 알려져있다. 그 중에서 우수한 전기적 특성 때문에 PZT를 기반으로 하는 압전 세라믹스가 사용되어져왔다. 그러나 Pb의 높은 유독성과 Pb를 포함하는 제품들의 처분문제들로 인해 제조에 관한 많은 문제점들을 지니고있다. 그리하여, Pb를 포함하지 않는 Pb-free계에 관한 연구가 전세계적으로 활발히 진행되고 있다. 다양한 Pb-free계 후보자들 가운데 $K_{0.5}Na_{0.5}NbO_3$ (KNN)는 높은 큐리온도와 좋은 강유전 특성 및 압전특성 때문에 PZT를 대체할 가장 장래성있는 대안들 중의 하나로 고려되고 있다. 그러나 고온에서 알칼라인 원소들의 높은 휘발성 때문에 보통의 소결공정으로는 소결이 잘되고 치밀한 세라믹스를 얻기가 어렵다. 많은 연구에서 KNN 세라믹스의 소결성을 개선하기 위하여 강유전 또는 반강유전체인 $SrTiP_3$와 $LiTaO_3$를 고용체 형성에 포함시키고 또한 $K_4CuNb_8O_{23}$, $MnO_2$, CuO등과 같은 소결조제를 첨가하여 압전 특성과 소결성을 개선시켰다. 따라서 본 연구에서는 비화학양론적 (1-X)[$[(K_{0.5}Na_{0.5}]_{0.97}(Nb_{0.96}Sb_{0.04})O_3]$ + 0.008CuO + 0.2wt% $Ag_2O$ + X $CeMnO_3$의 조성을 사용하여 A사이트와 B 사이트에 각각 Ce이온과 Mn 이온의 치환량을 변화하여 그에 따른 유전 및 압전특성을 조사하였다.

• 자원환경지질
• /
• 제8권3호
• /
• pp.117-124
• /
• 1975

경북(慶北) 봉화군(奉化郡) 소재(所在) 장군광산(將軍鑛山)의 표성산화(表成酸化)망간광석중(鑛石中)에서 필자(筆者)에 의(依)하여 발견명명(發見命名)된 신종건물(新種鍵物) 장군석(將軍石)은 국제(國際) 광물학회내연합(鑛物學會內聯合)에 있는 "신종광물(新種鑛物) 및 광물명위원회(鑛物名委員會)"의 공인(公認)을 받았는바 이에 대(對)한 광물학적(鑛物學的)인 연구결과(硏究結果)를 요약(要約)하면 다음과 같다. (1) 장군석(將軍石)은 표성산화(表成酸化)망간 광석중(鑛石中) cementation zone에서 산출(産出)되며, 엔소타이트, 토도로카이트, 방해석(方解石)을 수반(隨伴)한다. 대체로 공동(空洞)에서 수기상(樹技狀) 또는 방사상(放射狀)을 이루는 엽편상(葉片狀) 세립집합체(細粒集合體)(입자(粒子)의 크기 <0.05mm)로 또는 교질상대(膠質狀帶)로 산출(産出)한다. (2) 색(色)은 흑색(黑色)이며 광택(光澤)은 무염(無艶), 조흔(條痕)은 흑갈(黑褐)~암갈(暗褐色)이다. 벽개(劈開)는 한방향(方向)으로 완전(完全)하다. 경도(硬度)(H)=2-3이며 역쇄성(易碎性)이다. 비중(比重)(G)=3.59(실측시(實測植)), 3.58이론치(理論値)이다. (5) 화학분석치(化學分析値)로부터 계산(計算)된 장군석(將軍石)의 화학식(化學式)은 $Mn^{4+}{_{4.85}}(Mn^{2+}{_{0.90}}Fe^{3+}{_{0.30}})_{1.20}O_{8.09}(OH)_{5.91}$이며, 이상식(理想式)은 $Mn^{4+}{_{5-x}}(Mn^{2+},\;Fe^{3+}){_{1+x}}O_8(OH)_6$ ($x{\approx}0.2$)이다. (6) 장군석(將軍石)은 사방정사 속(屬)하며 X선(線) 분말회절분석(粉末廻折分析) 결과(結果), 단위포(單位胞)의 크기는 $a=9.324{\AA}$, $b=14.05{\AA}$, $c=7.956{\AA}$이며, 단위포(單位胞)의 체적(體積)은 $1042.25{\times}10^{-24}cm$이다. 보솔(輔率) a : b : c=0.663 : 1 : 0.566. 단위포함유수(單位胞含有數) (Z)=4. (7) 시차열분석곡선(示差熱分析曲線)은 $250{\sim}370^{\circ}C$와 $955^{\circ}C$에서 흡열(吸熱)피크를 보여준다. 전자(前者)는 장군석(將軍石)이 탈수(脫水) 및 산화(酸化)를 받아 $(Mn,\;Fe)_2O_3$이 생성(生成)된데 기인(基因)하며 후자(後者)는 hausmannite 형(型)의 구조(構造)를 갖는 $(Mn,\;Fe)_3O_4$의 생성(生成)에 기인(基因)하는 것이다. $(Mn,\;Fe)_2O_3$는 등보정사이고 $a=9.417{\AA}$이었고 $(Mn,\;Fe)_3O_4$는 정방정사이고 $a=5.76{\AA}$, $c=9.51{\AA}$이었다. (6) 장군석(將軍石)의 적외선흡수분광(赤外線吸收分光)스펙트럼은 $515cm^{-1}$와 $545cm^{-1}$에서 Mn-O stretching 진동(振動)을, $1025cm^{-1}$에서 O-H bending 진동(振動)을 그리고 $3225cm^{-1}$에서 O-H stretching 진동(振動)을 보여준다. (3) 장군석(將軍石)은 불투명광물(不透明鑛物)이며 현미경하(顯微鏡下)에서 반사도(反射度)는 13~15%이고 복반사율(複反射率)은 공기중(空氣中)에서 현저(顯著)하며 침액중(浸液中)에서 강(强)하다. 반사다색성(反射多色性)은 백색(白色)~담회색(淡灰色)이다. 십자(十字)니콜하(下)에서의 편광색(偏光色)은 공기중(空氣中)에서 청색(靑色)을 띈 황갈(黃褐)~회색(灰色)이고 침액중(浸液中)에서는 黃褐(황갈)~청갈(靑褐)~회색(灰色)이다. 내부반사(內部反射)는 없다. (4) 연마면(硏磨面)에 대(對)한 에칭반응(反應)은 HCl(conc.)와 $H_2SO_4+H_2O_2$ 회색(灰色), 퇴색(褪色), SnCl(sat.): 암색(暗色), $HNO_3$ (conc.) : 회색(灰色), $H_2O_2$ : 거품을 내며 퇴색(褪色). (9) 신종광물(新種鑛物) 장군석(將軍石)은 독특(獨特)한 화학조성(化學組成)과 단위포(單位胞)를 가지고 있어서 이의 발견(發見)은 산화(酸化)망간광물(鑛物)의 분류(分類)와 연구(硏究)에 새로운 방향(方向)과 지침(指針)이 되었다.

• Journal of Magnetics
• /
• 제9권1호
• /
• pp.17-22
• /
• 2004

We studied the magnetotransport properties of tunnel junctions with AlO and AlN barriers fabricated using microwave-excited plasma. The plasma nitridation process provided wider controllability than the plasma oxidization for the formation of MTJs with ultra-thin insulating layer, because of the slow nitriding rate of metal Al layers, comparing with the oxidizing rate of them. High tunnel magnetoresistance (TMR) ratios of 49 and 44% with respective resistance-area product $(R{\times}A) of 3 {\times} 10^4 and 6 {\times} 10^3 {\Omega}{\mu}m^2$ were obtained in the Co-Fe/Al-N/Co-Fe MTJs. We conclude that AlN is a hopeful barrier material to realize MTJs with high TMR ratio and low $R{\times}A$ for high performance MRAM cells. In addition, in order to clarify the annealing temperature dependence of TMR, the local transport properties were measured for Ta $50{\AA} /Cu 200 {\AA}/Ta 50 {\AA}/Ni_{76}Fe_{24} 20 {\AA}/Cu 50 {\AA}/Mn_{75}Ir_{25} 100 {\AA}/Co_{71}Fe_{29} 40 {\AA}/Al-O$ junction with $d_{Al}= 8 {\AA} and P_{O2}{\times}t_{0X}/ = 8.4 {\times} 10^4$ at various temperatures. The current histogram statistically calculated from the electrical current image was well in accord with the fitting result considering the Gaussian distribution and Fowler-Nordheim equation. After annealing at $340^{\circ}C$, where the TMR ratio of the corresponding MTJ had the maximum value of 44%, the average barrier height increased to 1.12 eV and its standard deviation decreased to 0.1 eV. The increase of TMR ratio after annealing could be well explained by the enhancement of the average barrier height and the reduction of its fluctuation.