• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3233-3237
• /
• 2010

A $Li[Ni_{0.3}Co_{0.4}Mn_{0.3}]O_2$ cathode was modified by coating with Li-La-Ti-O, and the effect of the coating thickness on their electrochemical properties was studied. The thickness of the coating on the surface of $Li[Ni_{0.3}Co_{0.4}Mn_{0.3}]O_2$ was increased by increasing the wt % of the coating material. The rate capability of the Li-La-Ti-O-coated electrode was superior to that of the pristine sample. 1- and 2-wt %-coated samples showed considerable improvement in capacity retention at high C rates. However, the rate capability of a 5-wt %-coated sample decreased. All the coated samples showed a high discharge capacity and slightly improved cyclic performance under a high cut-off voltage (4.8 V) condition. Results of a storage test confirmed that the Li-La-Ti-O coating layer was effective in suppressing the dissolution of the transition metals as it offered protection from the attack of the acidic electrolyte. In particular, the 2- and 5-wt %-coated samples showed a better protection effect than the 1-wt %-coated sample.

• 한국응용과학기술학회지
• /
• 제27권1호
• /
• pp.29-36
• /
• 2010

The effects of La addition to Ni/$CeO_2$ methane partial oxidation catalysts were investigated. Catalysts were prepared by the impregnation and urea methods. In the preparation of catalysts, La content was changed from 1 wt% to 3wt%. Catalysts that contain 2wt% La showed the highest methane conversion of about 80% and CO selectivity of 84% and $H_2$ selectivity of 70%. This result may be stemmed from that, when La content is 2wt%, a fluorite oxide-type structure is well formed and carbon deposition is also decreased. Among the catalysts, 2.5wt% Ni/Ce(La)Ox showed the highest catalytic activity. From the experiment of changing reaction temperature with 2.5wt% Ni/Ce(La)Ox catalyst, it was found that the optimum reaction temperature is $750^{\circ}C$ and at this temperature methane conversion was about 90%, CO and $H_2$ selectivities were 94 and 80%, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.511-512
• /
• 2008

For the $CO_2$ reforming of $CH_4$, Ni catalyst was supported on La-hexaaluminate or on $\gamma$-$Al_2O_3$. The catalytic activities of Ni/La-hexaaluminate catalysts were measured at $700^{\circ}C$ using gas chromatography (GC) for 72 h, and the reaction was maintained up to 72 hfor the investigation of catalyst deactivation. The surface of each catalyst after 72 h reaction was investigated using SEM and TEM, and the composition of the carbon deposits was investigated by using EA, TPO and TGA. Ni/La-hexaaluminate shows higher resistance to coke deposition than conventional Ni/$Al_2O_3$ which seems to be due to strong interaction between Ni and the support material. As a result of the reforming reaction, various types of carbon deposits were created on catalyst surface and the amounts of them were much smaller in the case of La-hexaaluminate than on $Al_2O_3$.

• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.715-719
• /
• 2011

$LaCrO_{3}$를 기본으로 하는 perovskite형 재료인 $La_{0.7}Sr_{0.3}Cr_{1-x}Ni_{x}O_{3}$(0.1 ${\leq}$ x ${\leq}$ 0.5)를 citric acid와 EDTA를 이용한 졸-겔법(sol-gel method)으로 합성하였다. 제조한 촉매의 특성분석은 BET, XRD, SEM, $H_2$-TPR, EA 그리고 TEM을 이용하였고, 프로판 수증기 개질 반응을 통하여 촉매 활성을 평가하였다. Perovskite 산화물의 A-site에는 Sr을 30 ml% 고정치환하고, B-site에 Ni 치환양을 증가시키면서 프로판 수증기 개질 반응 실험을 수행한 결과 Ni 치환양과 S/C의 비(steam to carbon ratio)가 증가할수록 프로판 전환율과 수소 수율이 향상되었다. $La_{0.7}Sr_{0.3}Cr_{0.5}Ni_{0.5}O_{3}$(LSCN-0.5)촉매가 S/C의 비가 1.7이고, $800^{\circ}C$의 반응온도 조건에서 100%의 프로판 전환율과 95.9%의 높은 수소 수율을 나타내어 가장 좋은 촉매 활성을 보였다. 반응 후의 촉매에서는 filamentous cabon형태의 탄소 침적형태가 나타나며, Ni 치환양이 증가할수록 침적되는 탄소의 양이 증가하는 것을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제18권4호
• /
• pp.338-343
• /
• 2005

Pb(Zr,Ti)O₃[PZT] thin films were prepared on a highly (100) oriented LaNiO₃[LNO] and a randomly oriented LNO by sol-gel process. The PZT thin films on a highly (100) oriented LNO show a high (100) crystal orientation (F=100 ％), those on a randomly oriented LNO show a random crystal orientation (F=60 ％). All the PZT layer have a flat and dense microstructure with large columnar grains and their grain size are 25 nm. In the ferroelectric curves at electric field of 40 kV/cm, a highly (100) oriented PZT/LNO samples show coercive field, E/sub c/=10 kV/cm and remanent polarization, P/sub r/=14.5 μC/㎠, while a randomly oriented PZT/LNO sample show E/sub c/=10 kV/cm and P/sub r/=5.4 μC/㎠.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.641-643
• /
• 2003

The ferroelectric properties of PZT(53/47) thin film was investigated by methoxy enthanol solution based on sol-gel method. The thickness of each layer by spincoating 0.25M sol at one time was $0.1{\mu}m$ and crack-free film was formed. $LaNiO_3/Si(100)$ electrode and $Pt/Ti/SiO_2/Si(100)$ electrode was coated by PZT sol at several times. PZT orientation was confirmed as a method of XRD and coercive field(Ec) as well as remnant polarization(Pr) was investigated from hysterisis curve. As a result of XRD analysis, we can know that the orientation of on PZT/LNO/Si(100) is better than on $Pt/Ti/SiO_2/Si(100)$. The remnant polarization(Pr) in LNO electrode was $87.5{\mu}C/cm^2$ and $39.8{\mu}C/cm^2$ in Pt. From this figures, it is investigated that the Pr in LNO electrode was better than in Pt.

• 한국전기전자재료학회논문지
• /
• 제18권4호
• /
• pp.330-337
• /
• 2005

La/sub 0.8/Sr/sub 0.2/Ga/sub 0.8/Mg/sub 0.2/O/sub 3-δ/-based solid electrolytes in which Mg site was partially substituted by Fe, Co or Ni (0.05, 0.1, 0.15 at.％) were fabricated by conventional solid-state reaction and their sintered densities were above 94％ of theoretical density. X-ray diffraction analysis and microstructure observation for the sintered specimens were performed. The ac complex impedance were measured at 400。C to l000。C in air and fitted with a Solatron ZView program. The electrical conductivity of La/sub 0.8/Sr/sub 0.2/Ga/sub 0.8/Mg/sub 0.2/O/sub 3-δ/-based solid electrolytes substituted by Fe, Co or Ni was higher than that of pure La/sub 0.8/Sr/sub 0.2/Ga/sub 0.8/Mg/sub 0.2/O/sub 3-δ/. The electrical conductivity of La/sub 0.8/Sr/sub 0.2/Ga/sub 0.8/Mg/sub 0.05/Ni/sub 0.15/O/sub 3-δ/ electrolyte was 3.4×10/sup -2/ Scm/sup -1/ at 800。C and the highest value of the whole electrolytes.

• 한국항해항만학회지
• /
• 제37권6호
• /
• pp.611-616
• /
• 2013

이 연구에서는 최근 25년간의 우리나라 기상청 및 일본 기상청 자료를 사용하여 선박의 안전에 크게 영향을 미치는 태풍과 엘니뇨 라니냐 현상과의 관계를 분석하였다. 주요 분석 결과는 다음과 같다. 엘니뇨 발생년의 연평균 태풍 발생 수는 23.9개이고, 라니냐 발생년의 그것은 24.9개이다. 엘니뇨 발생년에 태풍의 발생 수가 감소한다는 사실을 알 수 있다. 태풍의 세기를 나타내는 평균 중심최저기압과 평균 최대 풍속은 엘니뇨 발생년에 959.3hPa과 35.8m/s, 라니냐 발생년에 965.5hPa과 33.7m/s이었다. 즉, 엘니뇨 발생년의 태풍의 세기가 라니냐 발생년의 태풍의 세기보다 강함을 알 수 있다. 구체적으로 평균 중심최저기압은 6.2hPa 낮고, 평균 최대풍속은 2.1m/s 강하다. 이와 같은 결과는 태풍의 발생 해역과 밀접히 관련되어 있다. 즉, 엘니뇨 발생년에 태풍은 동경 150도 이동 해역과 북위 10도 이남 해역에서 상대적으로 더 많이 발생하고, 라니냐 발생년의 태풍은 동경 120-150도 해역과 북위 20도 이북 해역에서 더 많이 발생한다. 동경 150도 이동 해역과 북위 10도 이남 해역에서 발생한 태풍은 북태평양 서부의 광범위한 고수온역을 보다 장시간 이동하게 되므로 더 강력하게 발달할 수 있다.

• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.859-865
• /
• 2004

LaNiO$_3$(LNO) thin films on (100) Si substrates are prepared by sol-gel method on heat treatment conditions, such as heat transfer direction, pyrolysis and annealing process, and annealing temperatures and times. The effect of heat treatment conditions on the (100) orientations, structures and resistances of the thin films are investigated by XRD, SEM(FESEM), and a lout probe method. Highly (100) orientation factor(0.97), a pseudocubic crystalline structure with a dense and uniform microstructure could be formed by the following conditions： 1) the heat transfer direction is from Si substrate to LNO, 2) the pyrolysis and annealing process are alternated, 3) the annealing temperature is $650^{\circ}C$ and 4) the annealing times is 3 minutes. The sheet resistance of thin films decreased with increasing of a annealing temperature and time, and a number of coating.

• 대한화학회지
• /
• 제35권6호
• /
• pp.742-744
• /
• 1991