• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.123-123
• /
• 2018

Premenstrual syndrome (PMS) is a common disorder affecting the emotional and physical health of women during certain periods of the menstrual cycle. Many researchers who have previously studied PMS have believed that PMS is associated with changes in sex hormones and serotonin levels at the beginning of the menstrual cycle. However, recent studies suggest that progesterone/estrogen imbalance and elevation of prolactin-induced by dopamine low-secretion play a crucial role in increasing PMS symptoms. Because of this, we have focused on mitigating PMS symptoms through the mechanism of prolactin secretion inhibition by dopamine receptor activation. The inhibition of prolactin secretion by 61-kinds of medicinal herb extracts was investigated in GH3 pituitary cells. Among them, Inula heleniun L. root extract (IHE) showed excellent prolactin secretion inhibitory effect. IHEs were prepared using 30, 50, and 70% ethanol. And the yield, cytotoxicity, dopamine receptor activity and inhibition of prolactin secretion of each extract were measured. Through a series of experiments, we found that prolactin secretion was significantly reduced (P<0.01) by the components present in IHE and that dopamine receptor regulation was possible (P<0.05). Considering yield and safety, we suggest the use of 30% ethanol IHE in the development of PMS symptom relief products.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.113-122
• /
• 2018

A hydraulic breaker is an attachment of an excavator, and it crushes stones. Recently, research to reduce the impact and noise of breakers are ongoing. In this paper, a method to improve the upper, lower, and side dampers, which act as insulation for the attenuation of vibration during breaker operation, is studied through testing and simulation. To obtain the nonlinear material constants required for the simulation, the biaxial tensile test was performed with urethane, which is a material used for dampers. The existing parts and the improved parts were compared and evaluated using the LS-DYNA program. As a result, 50% of the equivalent stress was reduced in the bracket body of the hydraulic breaker, and the equivalent stress of the side damper was also decreased. We verified that the fatigue conditions were satisfied by performing a fatigue analysis.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.10
• /
• pp.477-482
• /
• 2002

One of the key technologic requirements for rotary blood pumps is the sealing of the motor shaft. A mechanical seal, a journal bearing, magnetic coupling, and magnetic suspension have been developed, but they have drawbacks such as wear, thrombus formation, and power consumption. A magnetic fluid seal is durable, simple, and non power consumptive. Long-term experiments confirmed these advantages. The seal body was composed of a Nd-Fe-B magnet and two pole pieces; the seal was formed by injecting magnetic fluid into the gap (50${\mu}m$) between the pole pieces and the motor shaft. To contain the ferro-fluid in the seal and to minimize the possibility of magnetic fluid making contact with blood, a shield with a small cavity was attached to the pole piece. While submerged in blood, the sealing pressure of the seal was measured and found to be 31kPa with magnetic fluid LS-40 (saturated magnetization, 24.3 KA/m) at a motor speed of 10,000 rpm and 53kPa under static conditions(0mmHg). The specially designed magnetic fluid seal for keeping liquids out is useful for axial flow blood pumps. The magnetic fluid seal was incorporated into an intra-cardiac axial flow blood pump.

• Computers and Concrete
• /
• v.25 no.2
• /
• pp.145-154
• /
• 2020

For the influence of the propagation law of stress wave at the coal-rock interface during the pre-blasting of the top coal in top coal mining, the ANSYS-LS/DYNA fluid-solid coupling algorithm was used to numerical calculation and the life-death element method was used to simulate the propagation of explosion cracks. The equation of the crushing zone and the fracturing zone were derived. The results were calculated and showed that the crushing radius is 14.6 cm and the fracturing radius is 35.8 cm. With the increase of the angles between the borehole and the coal-rock interface, the vibration velocity of the coal particles and the rock particles at the interface decreases gradually, and the transmission coefficient of the stress wave from the coal mass into the rock mass decreases gradually. When the angle between the borehole and the coal-rock interface is 0°, the overall crushing degree is about 11% and up to the largest. With the increase of the distance from the charge to the coal-rock interface, the stress wave transmission coefficient and the crushing degree of the coal-rock are gradually decreased. At the distance of 50 cm, the crushing degree of the coal-rock reached the maximum of approximately 12.3%.

• Archives of Pharmacal Research
• /
• v.22 no.2
• /
• pp.130-136
• /
• 1999

Mouse guanylate-binding protein 3 (mGBP3) is a 71-kDa GTPase which belongs to GTP-binding protein family. The present study showed that the expression of mGBP3 transcript was readily induced in a dose dependent fashion in the macrophage cell line RAW264.7 treated with either $interferon-{\gamma} (IFN-\gamma)$ or lipopolysaccaride (LPS). The expression of mGBP3 protein was also apparent by 4 and 6 h after the treatment of cells with IFN-\gamma (100 U/ml) or LPS ($1{\mu}g/ml$) , and remained at palteau for at least 24 h. Cycloheximide ($10{\mu}g/ml$) had no effect on the $IFN-\gamma-$ or LPS-induced mGBP3 expression, suggesting that the mGBP3 induction did not require further protein synthesis. Interestingly, a protein kinase C (PKC) inhibitor staurosporine (50 nM) abolished the induction of mGBP3 expression by LPS, but not by $IFN-{\gamma}$. These findings suggest that mGBP3 may be involved in the macrophage activation process and both IFN-\gamma and LS induce the mGBP3 expression through distinct signal transduction pathways.

• Steel and Composite Structures
• /
• v.38 no.1
• /
• pp.79-86
• /
• 2021

Due to the complex geological conditions, a large number of high quality coal seams was buried in the western of China which cannot be mining in open-pit methods. The dynamic properties of that coal cannot be studied easily in real site for the complex working condition. The compound coal blocks made on the basis of the real situation were studied in the laboratory. The physical and mechanical properties of the compound coal blocks and the raw coal were contrasted by using the UCS tests. The results show that the compound coal blocks made by mixing coal powder, cement and water in proportion of 2.5:2:1 are the closest to that of standard raw coal. Then the propagation of strain waves and crushing effects on the coal were studied in the compound coal blocks by using the super dynamic strain test system and the numerical calculated method of ANSYS/LS-DYNA. The results show that the diameter of the crushing zone in the compound coal blocks was similar to that in the numerical results. The fractures distribution in laboratory tests also has a similar trend to the calculation results. The measured strain waves at the distance of 50 cm, 100 cm, and 150 cm from the center of the charge are mainly concerned at -1.0×104 με and have a similar trend as that in the numerical simulation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.165-165
• /
• 2000

Glass slides were chemically etched with sulfuric acid using five different methods. we investigated the effects of the chemical etching conditions on such properties as chemical composition, surface roughness, and the thermal stability of the glass. Sodium and carbon atoms in the surface of the glass are effectively eliminated by chemical etching with sulfuric acid. The glass slides were boiled for 30 min in 95% sulfuric acid and were depth profiled at room temperature with X-ray photoelectron spectroscopy (XPS), the Na ls signal was not detected in the detection limit of XPS. Surface morphology of the glass was very different depending on the concentration of sulfuric acid. The surface of the glass etched with 50% sulfuric acid was rougher than that of glass etched with 95% sulfuric acid. The sodium concentration of the glass boiled for 30 min in 95% sulfuric acid was nearly zero at the glass surface, and the sodium composition changed very little with annealing temperatures up to 35$0^{\circ}C$ in a vacuum environment. However the sulfur concentration at the glass surface due to the sulfuric acid increased with increasing temperature.

• Microbiology and Biotechnology Letters
• /
• v.41 no.3
• /
• pp.284-291
• /
• 2013

In this study, the antibacterial and antioxidative activities of Epimedium koreanum Nakai were investigated for applications as cosmetic ingredients. Minimum inhibitory concentrations (MICs) of fraction-bacterium, that showed high antibacterial activity from disc diffusion assay on human skin pathogens, were tested. The ethyl acetate fraction on Staphylococcus aureus, Bacillus subtilis, Propionibacterium acnes and 50% ethanol extract on S. aureus exhibited higher antibacterial activities than methyl paraben, well known as a preservative. The DPPH (1,1-diphenyl-2-picrylhydrazyl) scavenging activities of 3 fractions of E. koreanum Nakai were lower than (+)-${\alpha}$-tocopherol, known as a typical antioxidant. From the results of the scavenging activities of various ROS generated in $Fe^{3+}-EDTA/H_2O_2$ systems ($OSC_{50}$), 50% ethanol extract ($OSC_{50}=2.46{\pm}0.06{\mu}g/ml$) and aglycone fraction ($OSC_{50}=1.45{\pm}0.02{\mu}g/ml$) showed high activities similar to L-ascorbic acid ($OSC_{50}=1.50{\pm}0.85{\mu}g/ml$), used as reference. The cellular protective effects (${\tau}_{50}$) on photohemolysis by $^1O_2$ generated by photosensitization reaction were tested. The cellular protective effect of 50% ethanol extract (${\tau}_{50}=37.0{\pm}0.3$ min) was similar to (+)-${\alpha}$-tocopherol (${\tau}_{50}=38.0{\pm}1.8$ min), used as reference. In particular, the ${\tau}_{50}$ of aglycone fraction results were $165.9{\pm}7.2$ min. This is a high cellular protective effect, more than 4 times that of (+)-${\alpha}$-tocopherol. These results indicate that E. koreanum Nakai extract, and its fractions, could be utilized as a cosmetic ingredient possessing antibacterial and antioxidative activities.

• Journal of Aquaculture
• /
• v.17 no.2
• /
• pp.103-108
• /
• 2004

Effects of temperature and salinity were investigated on physiological responses of Mytilus coruscus seedlings. Temperature tolerance and survival of M. coruscus, were examined at temperature 20, 25, 28, 30 and 35$^{\circ}C$ for 9 das. Survival of M. coruscus was 90% at temperature 2$0^{\circ}C$ and $25^{\circ}C$. LT$_{50}$ (lethal temperature) of 9 days was at 27.1$^{\circ}C$. The respiration and filtration rates of M. coruscus were increased with temperature up to $25^{\circ}C$, and decreased with temperature ranged from $25^{\circ}C$ to 3$0^{\circ}C$. LS$_{50}$ (lethal salinity, psu) of 9 days at 1$0^{\circ}C$, 15$^{\circ}C$ and $25^{\circ}C$ were 17.01 psu, 19.95 psu and 21.79 psu respectively. Salinity affected survival of M. coruscus with higher temperature. However the respiration and filtration rates were reduced with lower salinity.

• Journal of the Korean Vacuum Society
• /
• v.6 no.2
• /
• pp.159-164
• /
• 1997

We have studied initial oxidation of the alkali metal(AM)/Si(111) surface using X-ray photoelectron spectroscopy(XPS) and reflection high energy electron diffraction(RHEED) at room temperature(RT) and high temperature(HT)(300~50$0^{\circ}C$). The oxidation of the Si(111)7$\times$7 surface was promoted by the adsorption of 1 momolayer(ML) AM, whereas no promotion occurred for submonolayer(<0.5 ML) adsorbed Si(111)7$\times$7 surface at RT. O Is core level spectra were measured with increasing oxygen exposure. It was found that the oxygen adsorbed on the Si(111)7$\times$7-AM surface have two different bond configuration, Si-O and Am-O, respectively. From these results, we discussed the role of AM-O bonding in the promoted oxidation. At HT(300~50$0^{\circ}C$), the AM-adsorbed surface became very inactive with the structural transformation to the 3$\times$1-AM. We present the results of the oxidation of the Si(111)3$\times$1-AM(Na, K, Cs) surface.