• Korean Journal of Poultry Science
• /
• v.40 no.4
• /
• pp.315-325
• /
• 2013

In this study, the effects of Doenjang powder (DP : Korean traditional fermented soy bean paste) addition on the quality and shelf-life of chicken sausages during storage were evaluated. The chicken sausages were manufactured with 60% of chicken breast meat, 20% of chicken skin and other ingredients. The sausages were divided into four treatments according to DP addition level such as 0, 2, 5 and 8%. The sausages were vacuum packed and stored at a refrigerator ($5^{\circ}C$) for 4 weeks. pH of sausage was in creased with DP addition after 2 weeks storage (p<0.05). The addition of 2% and 5% DP decreased the lipid oxidation (TBARS) value (p<0.05) and addition of 8% DP seemed to promote the protein deterioration (VBN) over the storage (p<0.05). In the instrumental color, the chicken sausages with 5% and 8% DP showed higher redness and lower lightness value than sausage with 0 and 2% DP (p<0.05) over the storage. The hardness and gumminess of chicken sausages added with 5% DP were significantly lower than those of other treatments during the storage (p<0.05). The addition of DP detained the growth of aerobic and anaerobic bacteria counts after 2 week of storage (p<0.05), but no significant difference was found by DP addition level (p>0.05). In conclusion, 5% DP could be used as ingredient of chicken sausage to enhance sensory quality and retard lipid oxidation.

• Research in Plant Disease
• /
• v.17 no.3
• /
• pp.358-363
• /
• 2011

Dapple fruits of plum cv. Oiishiwase (Prunus salicina L.) were occurred at Gyeonggi-do and Gyeongsangbukdo. The symptoms resembled the dapple fruit disease caused by Hop stunt viroid (HSVd). To identify the causal disease agents, RT-PCR was performed with the specific primers of HSVd. RT-PCR analysis showed that HSVd variants (DP1, DP2) were detected from dapple fruits. HSVd detection was also confirmed by the dot blot hybridization using a DIG-probe specific to HSVd. Nucleotide sequences of DP1 and DP2 had the identities of 94-100% with those of other 7 variants of HSVd in Genbank database. DP1 and DP2 were different in two nucleotides of CG and AA at position of 59 and 60, orderly. Based on nucleotide sequences at position of 59 and 60, HSVd variants associated with plum dapple fruits could be divided mainly into three groups as CG, AA and TG.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1367-1370
• /
• 2003

PROFIBUS is an open industrial communication network for a wide range of application in manufacturing automation and process control systems. PROFIBUS-DP(Decentralized Peripherals) are mainly used to connect smart automation devices via a fast serial link. PROFIBUS-DP adopts master/slave mechanism for communication service. In this paper, we present an implementation method of the protocol stacks for the master station of PROFIBUS-DP.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1114-1123
• /
• 2015

Bushing is the key link to connect outer and inner insulating systems and also the essential electric accessory in electric power system, especially in the high voltage engineering (AC 1000kV, DC 800kV). This paper presented the experimental research of thermal aging characteristic of oil-paper insulation used in bushing. A thermally accelerated aging experiment at 90℃ was performed. The bushing models containing five layers of paper were sealed into the aging vessels and further aged for 250 days. Then several important parameters associated with the aging were observed and evaluated. The results showed that the degree of polymerization (DP) of papers gradually decreased. The DP values of outermost layer and middle layer fit well into the second-order kinematic model and first-order kinematic model, respectively. Less deterioration speed of the inter-layer paper than outer layer was confirmed by the variation of DP. Hydrolysis was considered as the main cause to this phenomenon. In addition, the logarithm of the furfural concentrations in insulation oil was found to have good linear relationship with DP of papers. Interestingly, when the aging time is about 250 days and DP is 419, the aging process reaches an inflection point at which the DP approaches the leveling off degree of polymerization (LODP) value. Both tanδ and acid number of oils increased, while surface and volume resistivity of papers decreased. The obtained results demonstrated that thermal aging and moisture absorbed in papers brought great influence to the degradation of insulating paper, leading to rapid decrease of DP and increase of the tanδ. Thus, the bushing should be avoided from damp and real-time monitoring to the variation of tanδ and DP values of paper is an effective way to evaluate the insulation status of bushing.

• Korean Journal of Food Science and Technology
• /
• v.21 no.1
• /
• pp.80-85
• /
• 1989

The structural properties of covered and naked barley starches and those components were investigated. ${\beta}-amylosis\;limit(%)$ of covered and naked barley starches were 58.6 and 56.3%, respectively and those of their amyloses and amylopectins were 87.0, 77.7, 57.6 and 52.0%, respectively. The ratios of outer chain length ${\overline{OCL}}$ and inner chain length${\overline{ICL}}$ for amylopectins of covered and naked barley were about 2.2:1 and 2.0:1, respectively. The elution curves by Sephadex G-75 after debranching starches with pullulanase were similar patterns for two starches and yielded two peaks consisting of amylose component${\overline{dp}}>55$ and bimodal amylopectin components of ${\overline{dp}_(35-45)$ and ${\overline{dp}}(10-20)$ hydrolysates. Also, hydrolysis products by sequential hydrolysis with pullulanase and ${\beta}-amylase$ contained 0.03-0.5% non-hydrolyzed peak components of ${\overline{dp}}>55$. The elution profiles of ${\beta}-amylase$ hydrolysates yielded two peaks consisting of the inner components${\overline{dp}}>55$ and the outer chain components of amylopectin${\overline{dp}}>10$ regardless of samples. However, ${\overline{dp}}$ distributions of ${\overline{dp}>55}$ hydrolysates exhibited the significant differences due to the varieties.

• Composites Research
• /
• v.33 no.1
• /
• pp.7-12
• /
• 2020

Over the past decade, liquid crystalline epoxy (LCER) has attracted much attention as a promising matrix for the development of efficient heat dissipation materials. This study presents a comprehensive study including synthesis, preparation and chacterization of polymer/inorganic composites using typical 4,4-diglycidyloxybiphenyl (DP) epoxy among LECR. To confirm the thermal conductivity of composite materials, we have prepared composite samples composed of epoxy resin and single-wall carbon nanotube (SWCNT) as a filler. In particular, DP composites exhibit higher thermal conductivity than commercial epoxy composites that use the same type of filler due to the highly ordered microstructure of the LCER. In addition, the thermal conductivity of the DP composite can be controlled by controlling the amount of filler. In particular, the DP composite containing a SWCNT content of 50 wt% has the highest thermal conductivity of 2.008 W/mK.

• Journal of Navigation and Port Research
• /
• v.41 no.5
• /
• pp.287-296
• /
• 2017

The Formal Safety Assessment (FSA) is a structured and systematic methodology developed by the IMO, aimed at assessing the risk of vessels and recommending the method to control intolerable risks, thereby enhancing maritime safety, including protection of life, health, the marine environment and property, by using risk analysis and cost-benefit assessment. While the FSA has mostly been applied to merchant vessels, it has rarely been applied to a DP vessel, which is one of the special purpose vessels in the offshore industry. Furthermore, most of the FSA has been conducted so far by using the Fault Tree Analysis tool, even though there are many other risk analysis tools. This study carried out the FSA for safe operation of DP vessels by using the Bayesian network, under which conditional probability was examined. This study determined the frequency and severity of DP LOP incidents reported to the IMCA from 2001 to 2010, and obtained the Risk Index by applying the Bayesian network. Then, the Risk Control Options (RCOs) were identified through an expert brainstorming and DP vessel simulations. This study recommends duplication of PRS, regardless of the DP class and PRS type and DP system specific training. Finally, this study verified that the Bayesian network and DP simulator can also serve as an effective tool for FSA implementation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.521-524
• /
• 2008

Effect of prior deformation on the sliding wear of the ultra-fine grained (UFG) ferrite-martensite dual phase (DP) steel was investigated. The UFG DP steel was fabricated by the ECAP and subsequent intercritical annealing. The steel was cold rolled before the wear test, and the effect of the prior deformation on the wear was examined. The wear tests were carried out at various loads against a bearing steel ball. The wear rate of the UFG DP steel that did not experience the prior deformation was higher than that of the coarse-grained (CG) DP steel, because of more severe surface shear deformation. The wear rate of the specimens with prior deformation was much higher than that of the specimen without prior deformation. The deformed CG DP specimen showed higher rate than the deformed UFG DP specimen, and the rate-variation of the CG DP steel was much bigger under the same test condition.

• Journal of Navigation and Port Research
• /
• v.41 no.5
• /
• pp.259-268
• /
• 2017

Formal Safety Assessment (FSA) has been mostly implemented on the hardware aspects of vessels. Although there are guidelines regarding human error FSAs, there have not been many assessments in such areas. To this end, this study seeks to use precedent studies for the safe operation of DP vessels, conducting an FSA regarding human error of DP LOP (Loss of Position) incidents. For this, the study referred to precedent studies for the frequency of DP LOP incidents caused by human errors, adding the severity of LOP incidents, and then applying them to the Bayesian network. As a result, the study was able to confirm that among DP LOP incidents caused by human errors, the drive-off from skill-based errors was 74.3% and the drive-off from unsafe supervision was 50.5%. Based on such results, RCOs (Risk Control Options) were devised through a brainstorming session with experts coming up with proposals including providing mandatory DPO training, installing DP simulator on the vessels, drawing up measures to understanding the procedures for safe operation of DP vessels. Moreover, it was found that mandatory DPO training is reasonable in terms of cost benefits and that while installing a DP simulator is not suitable in terms of cost benefits, it can significantly reduce risks when operating DP vessels.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.121-122
• /
• 2008

Blue emitting materials have been explored by various researchers. However, blue-emitting materials with high luminous efficiency, good color purity, and thermal stability are still much desired. In this study, we synthesized a new blue luminescent material, $SnDP(HPB)_2$ which is low molecular compound and thermal stability. The PL spectrum of $SnDP(HPB)_2$ was observed blue at the wavelength of 447nm. The ionization potential(IP) and the electron affinity(EA) of $SnDP(HPB)_2$ was measured to be 6.7 eV and 3.0 eV, respectively. The fundamental structure of the OLED was ITO/NPB/$SnDP(HPB)_2/Alq_3$/LiF/Al. As a Result, we obtained to enhance the performance of blue OLED.