• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권3호
• /
• pp.270-281
• /
• 2018

Application of the LeMoS hybrid (LH) URANS/LES method for the wake parameters prediction is considered. The wake fraction coefficient is calculated for inland ship model M1926 under shallow water conditions and compared to results of PIV measurements. It was shown that due to lack of the resolved turbulence at the interface between LES and RANS zones the artificial grid induced separations can occur. In order to overcome this drawback, a shielding function is introduced into LH model. The new version of the model is compared to the original one, RANS $k-{\omega}$ SST and SST-IDDES models. It is demonstrated that the proposed modification is robust and capable of wake prediction with satisfactory accuracy.

• Advances in aircraft and spacecraft science
• /
• 제10권4호
• /
• pp.303-315
• /
• 2023

The primary goal of this research is to investigate flow separation phenomena using various turbulence models. Also investigated are the effects of free-stream turbulence intensity on the flow over a NACA 0018 airfoil. The flow field around a NACA 0018 airfoil has been numerically simulated using RANS at Reynolds numbers ranging from 100,000 to 200,000 and angles of attack (AoA) ranging from 0° to 18° with various inflow conditions. A parametric study is conducted over a range of chord Reynolds numbers for free-stream turbulence intensities from 0.1 % to 0.5 % to understand the effects of each parameter on the suction side laminar separation bubble. The results showed that increasing the free-stream turbulence intensity reduces the length of the separation bubble formed over the suction side of the airfoil, as well as the flow prediction accuracy of each model. These models were used to compare the modeling accuracy and processing time improvements. The K- SST performs well in this simulation for estimating lift coefficients, with only small deviations at larger angles of attack. However, a stall was not predicted by the transition k-kl-omega. When predicting the location of flow reattachment over the airfoil, the transition k-kl-omega model also made some over-predictions. The Cp plots showed that the model generated results more in line with the experimental findings.

• 한국추진공학회지
• /
• 제20권6호
• /
• pp.18-28
• /
• 2016

듀얼 벨 노즐을 평가하기 위한 기초연구로써 전산수치해석을 진행하였다. 추후 진행할 설계 변수 연구를 위해 듀얼 벨 노즐을 설계하고 입구 조건과 난류 모델, 최적 격자수를 선정하였다. 듀얼 벨 노즐은 KSLV-II 1단 노즐을 기반으로 설계하였다. 입구 조건은 설계 값과의 비교를 통해 비반응 8화학종의 동결유동 모델로 결정하였다. 난류 모델은 SST $k-{\omega}$ 모델이 가장 적합하였다. 격자 민감도 해석을 통해 약 15만개의 최적 격자수를 선정하였다. 본 연구에서 결정한 내용들을 바탕으로 향후 한국형발사체에 듀얼 벨 노즐을 적용한 해석을 진행하여 성능 이득을 연구하고자 한다.

• 한국유체기계학회 논문집
• /
• 제13권4호
• /
• pp.25-30
• /
• 2010

Flow analysis and performa nce evaluation have been performed for a ventilation axial-flow fan with different positions of the motor. Two different positions of motor have been tested; one is in front of the impeller and the other is behind the impeller. Flow analyses are performed by solving three-dimensional Reynolds-averaged Navier-Stokes equations through a finite-volume solver. Preliminary numerical calculations are carried out to test the performances of different turbulence models, i.e., SST model, k-$\omega$ model, and k-$\varepsilon$ model with and without using empirical wall function in the flow analysis. The validation of numerical analyses has been performed in comparison with the experimental data. The numerical results for the performance characteristics of the ventilation axial-flow fan with two different positions of the motor have been presented.

• 한국군사과학기술학회지
• /
• 제13권3호
• /
• pp.372-377
• /
• 2010

The objective of this study is to predict the drag of an axisymmetric underwater vehicle with bluff afterbody using CFD. FLUENT, commercial CFD code, is used to simulate high Reynolds number turbulent flows around the vehicle. The computed drag coefficients are compared to available experimental data at various Reynolds numbers. Four widely used two-equation turbulence models are investigated to evaluate their performance of predicting the anisotropic turbulence in a recirculating flow region, which is caused by flow separation arising from the base of the vehicle. The simulations with Realizable ${\kappa}-{\varepsilon}$ and ${\kappa}-{\omega}$ SST turbulence models predict the anisotropic turbulent flows comparatively well and the drag prediction results with those models show good agreements with the experimental data.

• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.3014-3021
• /
• 2015

셀-튜브 열교환기는 다양한 크기와 유동형태로 쉽게 제작이 용이함으로 산업분야에 널리 이용된다. 본 연구에서는 열교환기의 열전달성능을 도모하고자 배플의 컷 방향, 배플의 경사각 및 배플의 회전각 등을 변경하여 ANSYS FLUENT v.14를 사용한 SST $k-{\omega}$ 난류모델을 적용하여 쉘 내부의 열전달률 및 압력강하 특성을 해석하였다. 그 해석결과로 배플의 컷 방향은 수평형 모델 A보다 수직형 모델 B 및 각도 $45^{\circ}$형 모델 C가 이 열전달성능이 향상되는 것으로 나타났다. 또한 배플의 경사각을 $10^{\circ}$로 적용한 경우와 배플의 회전각을 $0^{\circ}-90^{\circ}-180^{\circ}-270^{\circ}$로 배치한 모델 D의 경우가 열전달률 및 압력강하 특성이 우수한 결과를 나타냈다.

• International Journal of Aerospace System Engineering
• /
• 제2권2호
• /
• pp.67-72
• /
• 2015

The main concern of this study is to integrate the EARSM into an industrial RANS solver in conjunction with the $k-{\omega}$ model, as proposed by Hellsten (EARSMKO2005). In order to improve the robustness, particular limiters are introduced to turbulent conservative variables, and a suitable full-approximation storage (FAS) multi-grid (MG) strategy is designed to incorporate turbulence model equations. The present limiters and MG strategy improve both robustness and efficiency significantly but without degenerating accuracy. Two discretization approachs for velocity gradient on cell interfaces are implemented and compared with each other. Numerical results of a three-dimensional supersonic square duct flow show that the proper discretization of velocity gradient improves the accuracy essentially. To assess the capability of the resulting EARSM $k-{\omega}$ model to predict complex engineering flow, the case of Common Research Model (CRM, Wing-Body) is performed. All the numerical results demonstrate that the resulting model performs well and is comparable to the standard two-equation models such as SST $k-{\omega}$ model in terms of computational effort, thus it is suitable for industrial applications.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.387-397
• /
• 2013

An assessment of two-equation turbulence models, the low Reynolds k-${\varepsilon}$ and k-${\omega}$ SST models, with the compressibility corrections proposed by Sarkar and Wilcox, has been performed. The compressibility models are evaluated by investigating transonic or supersonic flows, including the arc-bump, transonic diffuser, supersonic jet impingement, and unsteady supersonic diffuser. A unified implicit finite volume scheme, consisting of mass, momentum, and energy conservation equations, is used, and the results are compared with experimental data. The model accuracy is found to depend strongly on the flow separation behavior. An MPI (Message Passing Interface) parallel computing scheme is implemented.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권7호
• /
• pp.938-945
• /
• 2011

Unsteady flow simulations through a transonic turbine vane were carried out for an isentropic Mach number of 1.02 and a Reynolds number of $10^6$. The main objective of the study is to investigate the effect of unsteadiness due to vortex shedding on the flow in transonic regime. The steady and the time-averaged unsteady results by employing three different turbulence models: shear stress transport (SST), k-${\omega}$, and ${\omega}$ Reynolds stress models were compared. The comparisons were emphasized on the isentropic Mach number along the blade and total pressure loss at the cascade exit. The results showed that both steady and unsteady calculations have good agreement with experimental data along the blade surface. However, at cascade exit, the unsteady calculations have much better agreement with experimental data than steady calculations. Based on these, we conclude that the unsteady flow calculations are essential for these types of problems.

• 한국추진공학회지
• /
• 제16권2호
• /
• pp.10-16
• /
• 2012

지상연소시험용 추력기 노즐의 성능해석을 위하여 노즐유동 특성 및 플룸 구조를 해석한다. 2차원 축소확대 노즐유동을 해석하고, 이를 실험값과 비교하여 해석기법 검증 및 난류모델 선정을 수행한다. k-${\omega}$ SST 난류모델을 사용한 Reynolds-averaged Navier-Stokes 방정식으로 2차원 축대칭 지상연소시험용 노즐을 해석한 결과, 초기 설계된 노즐내부에서 충격파 및 유동박리에 의한 성능저하가 관찰되었다. 이에 노즐 확대부분의 형상을 수정하여 성능 향상을 확인하였다.