• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.33-34
• /
• 2000

The effect of $Y^{3+}$ addition to $SrTiO_3:Pr^{3+}$ on the photoluminescence and cathodoluminescence was studied. We discovered that light emitting levels of $Pr^{3+}$ vary by addition of $Y^{3+}$. In $(Sr_{1-x}Y_x)TiO_3:Pr^{3+}$, both the green and red emission are discovered while the red emission prevails in $Sr(Ti_{1-x}Y_x)O_3:Pr^{3+}$ . $Sr(Ti_{1-x}Y_x)O_3:Pr^{3+}$ shows enhancement of red emission by two kinds of enhancement process.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.06a
• /
• pp.155-159
• /
• 2004

We synthesized ion exchange resin that can remove $NO_3\;^-$ selectively rather than $SO_4\;^{2-}$. Ion exchange property of the synthesized ion exchange resin occurred like the following process, $NO_3\;^-$ > $SO_4\;^{2-}$, the efficiency of functional group to remove $NO_3\;^-$ occurred in the process of $NPr_3$ > $NBu_3$ > $NEt_3$ > $NMe_3$ > $NPe_3$ > $N(EtOH)_3$, and the efficiency of functional group to remove $SO_4\;^{2-}$ occurred in the process of $NMe_3$ > $NEt_3$ > $NPr_3$ > $NBu_3$ > $NPe_3$.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.95-98
• /
• 2013

The photoluminescence (PT) properties of Al-doped ZnO thin films grown by the sol-gel dip-coating method have been investigated. At 12 K, nine distinct PL peaks were observed at 2.037, 2.592, 2.832, 3.027, 3.177, 3.216, 3.260, 3.303, and 3.354 eV. The deep-level emissions (2.037, 2.592, 2.832, and 3.027 eV) were attributed to native defects. The near-band-edge (NBE) emission peaks at 3.354, 3.303, 3.260, 3.216, and 3.177 eV were attributed to the emission of the neutral-donor-bound excitons ($D^0X$), two-electron satellite (TES), free-to-neutral-acceptors (e,$A^0$), donor-acceptor pairs (DAP), and second-order longitudinal optical (2LO) phonon replicas of the TES (TES-2LO), respectively. According to Haynes' empirical rule, we calculated the energy of a free exciton (FX) to be 3.374 eV. The thermal activation energy for $D^0X$ in the nanocrystalline ZnO thin film was found to be ~25 meV, corresponding to the thermal dissociation energy required for $D^0X$ transitions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.86-86
• /
• 2009

The $(Na_{0.5}K_{0.5})NbO_3-SrTiO_3$ ceramics were produced by the conventional solid-state sintering method, and their microstructure and electrical properties were investigated. All $(Na_{0.5}K_{0.5})NbO_3-SrTiO_3$ ceramic show dense and homogeneous structure without the presence of the rosette structure. The dielectric constant, loss and remanent polarization of $(Na_{0.5}K_{0.5})NbO_3-SrTiO_3$ ceramics were superior to those of single composition $(Na_{0.5}K_{0.5})NbO_3$

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.9
• /
• pp.555-560
• /
• 2014

In this paper, in order to develop outstanding Pb-free composition ceramics, the $Fe_2O_3$-doped ($Na_{0.525}K_{0.443}Li_{0.037}$)($Nb_{0.883}Sb_{0.08}Ta_{0.037}$)$O_3$ + 0.3 wt% $Bi_2O_3$ + x wt% $Fe_2O_3$ (x= 0~1.0 wt%)(abbreviated as NKL-NST) lead-free piezoelectric ceramics have been synthesized using the ordinary solid state reaction method. The effect of $Fe_2O_3$-doping on their microstructure and electrical properties were investigated. XRD diffraction pattern studies confirm that $Fe_2O_3$ completely diffused into the NKL-NST lattice to form a new stable soild solution with $Fe^{3+}$ entering the $Nb^{5+}$, $Sb^{5+}$ and $Ta^{5+}$ of B-site. And, phase structure of all the ceramics exhibited pure perovskite phase and no secondary phase was found in the ceramics. The ceramics doped with 0.6 wt% $Fe_2O_3$ have the optimum values of piezoelectric constant($d_{33}$), planar piezoelectric coupling coefficient($k_p$) and mechanical quality factor($Q_m$) : $d_{33}$ = 233 [pC/N], $k_p$= 0.44, $Q_m$= 95. These results indicate that the ($Na_{0.525}K_{0.443}Li_{0.037}$)($Nb_{0.883}Sb_{0.08}Ta_{0.037}$)$O_3$ +0.3 wt% $Bi_2O_3$ + 0.6 wt% $Fe_2O_3$ ceramic is a promising candidate for lead-free piezoelectric ceramics.

• Journal of the Korean Ceramic Society
• /
• v.45 no.4
• /
• pp.226-231
• /
• 2008

The dense sintered bodies with >95% theoretical densities were successfully obtained from the $BaZrO_3,\;BaCeO_3,\;Ba(Zr_{0.7}Ce_{0.3})O_3$ solid solution, and core-shell structured $0.7BaZrO_3-0.3BaCeO_3$ composite powders prepared by sol-gel methods. The activation energy of $Ba(Zr_{0.7}Ce_{0.3})O_3$ solid solution calculated from the Arrhenius plot of the proton conductivities was similar to that of $BaZrO_3$. The activation energy of core-shell structured $0.7BaZrO_3-0.3BaCeO_3$ composite, however, was much lower than that of $BaZrO_3$ or $Ba(Zr_{0.7}Ce_{0.3})O_3$ solid solution, and was very similar to that $BaCeO_3$. These results could be assigned to the Ce-rich grain boundary which was clearly observed by EDX in core-shell structured $0.7BaZrO_3-0.3BaCeO_3$ composite.

• Korean Journal of Pharmacognosy
• /
• v.32 no.4 s.127
• /
• pp.302-306
• /
• 2001

The stem barks of Kalopanax septemlobus were extracted with MeOH, and successively partitioned with $CH_2Cl_2$, EtOAc, BuOH and water. Repeated column chromatographic separation of the $CH_2Cl_2$ fraction resulted in the isolation of four compounds. Their structures were identified as ${\beta}-sitosterol$ (1), oleanolic acid (2), 3,3'-bis(3,4-dihydro-4-hydroxy-6-methoxy-2H-1-benzopyran) (3) and (-)-balanophonin (4). This is the first report on the isolation of 3,3'-bis(3,4-dihydro-4-hydroxy-6-methoxy-2H-1-benzopyran) (3) and (-)-balanophonin (4) from Kalopanax spp.

• YAKHAK HOEJI
• /
• v.38 no.6
• /
• pp.775-781
• /
• 1994

$({\pm})-Dioxolane-T$ and$({\pm})-BCH-189$ are know to possess anti-HIV activities, and less to xicities compared to other dideoxynucleoside AIDS drugs. We have synthesized 34 different enantiomerically pure nucleosides by glycosylation of L-1,3-dioxolanyl acetate and L-1,3-oxathiolanyl acetate sugar moieties with uracil or 6-azauracil with alkyl chains$(C_1-C_3)$ on 5 or 6 position.

• BMB Reports
• /
• v.39 no.5
• /
• pp.537-545
• /
• 2006

CMTM/CKLFSF is a novel family of proteins linking chemokines and TM4SF. In humans, these proteins are encoded by nine genes, CKLF and CMTM1-8/CKLFSF1-8. Here we report the characteristics and expression profile of CMTM3/CKLFSF3. Human CMTM3/CKLFSF3 has a high sequence identity among various species and similar characteristics as its mouse and rat homologues. Established by results both of RT-PCR and Quantitative Real-time PCR, the gene is highly transcribed in testis, leukocytes and spleen. For further verification, we generated a polyclonal antibody against human CMTM3/CKLFSF3 and found that the protein is highly expressed in the testis and some cells of PBMCs. Therefore, CMTM3/CKLFSF3 is an evolutionarily conserved gene that may have important roles in the male reproductive system and immune system. Further studies are necessary to validate its functions in the two systems.

• Restorative Dentistry and Endodontics
• /
• v.29 no.3
• /
• pp.212-218
• /
• 2004

The purpose of this study was to quantify the amount of remaining gutta-percha/sealer on the walls of root canals when three types of nickel-titanium rotary instruments (Profile. ProTaper and $K^3$) and a hand instrument(Hedstrom file) used to remove these materials. The results of this study were as follows: 1. In the total time for gutta-percha removal. Profile group was the fastest and followed by $K^3$, Protaper, Hedstrom file group. 2. In case of the evaluation of the volume of remained gutta-percha from radiograph. $K^3$ group got the highest score and followed by Protaper. Hedstrom file. Profile group in the apical 1/3. 3. In case of the evaluation of the volume of gutta-percha remained from stereomicroscope, $K^3$ group got the highest score and followed by Protaper. Hedstrom file. Profile group in the apical 1/3. These results showed that instrumentation using nickel-titanium rotary instrument groups was faster than that using hand instrument group. The effect of gutta-percha removal using Profile group was better than that using Protaper and $K^3$ group in the nickel-titanium rotary instrument groups.