• Journal of Biosystems Engineering
• /
• 제31권4호
• /
• pp.349-354
• /
• 2006

This study was performed to evaluate the performances for a concurrent flow rice dryer of pilot scale with devices for circulating rice. The pilot scale dryer with the capacity of 700 kg was developed to obtain design informations for the development of actual scale dryer of holding capacity of 10 tons. Three drying tests were conducted at two temperature levels of $100^{\circ}C\;and\;120^{\circ}C$, and two air flow rates levels of $28.5cmm/m^2\;and\;57.1cmm/m^2$. Drying conditions for Test-1, Test-2 and Test-3 were $100^{\circ}C\;-28.5cmm/m^2,\;120^{\circ}C-28.5cmm/m^2\;and\;120^{\circ}-57.1cmm/m^2}$ respectively. Drying rates were 0.73%(w.b./h) for Test-1, 0.90%(w.b./h) for Test-2 and 1.46%(w.b./h) for Test-3. The crack ratios of brown rice after drying ranged from 2.4% to 8.4%, and increased with the increase of drying rate and airflow rate. The energy consumptions were from 6,225 kJ/kg to 6,993 kJ/kg which was higher than that of conventional cross-flow rice circulating type dryer used in Korea. This results were due to the lower ambient air temperatures of $4.5^{\circ}C\;to\;13.4^{\circ}C$ during drying tests.

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.91-94
• /
• 2001

By varying fabricating process, precursor powders with different initial conditions were prepared. Subsequently, Bi-2223/Ag tapes were made through these powders. The effects of precursor powders on the phase evolution and Jr properties of Bi-2223/Ag tapes were studied along with several thermomechanical cycles. Our results showed that the initial conditions of precursor powders could strongly influence the phase formation rate and $J_{c}$ value in final tapes. The factors of precursor powders that influence the phase formation and $J_{c}$ of Bi-2223/Ag tapes must be studied and optimized in combination.ion.

• 에너지공학
• /
• 제8권2호
• /
• pp.279-284
• /
• 1999

국내 무연탄의 질소 산화물과의 반응 특성을 알아보기 위하여 열중량분석기에서 등온 반응 실험을 행하였다. 사용 무연탄은 도계무연탄이며, 순수한 탄소인 SP-1 흑연이 비교 시료로 선택되었다. 탄소-NO 및 탄소-$N_2$O 반응은 55$0^{\circ}C$~90$0^{\circ}C$범위의 등온 조건과 기체 분압 5kPa~20 kPa조건에서 온도와 기체 분압의 영향을 실험하였다. NO 반응에서는 NO 분압에 대한 차수는 0.45~0.96 범위이었고, 활성화에너지는 39 kJ/mol~112 kJ/mol 범위의 값을 나타내었다. $N_2$O 반응에서는 $N_2$O 분압에 대한 차수는 0.62~0.87 범위이고, 활성화에너지는 190 kJ/mol~215.3 kJ/mol 범위의 값을 나타내었다. 무연탄 연소반응과 비교하면 $700^{\circ}C$ 이하에서는 $O_2$>NO>$N_2$O 순으로 반응속도가 변화하였고, $700^{\circ}C$ 이상에서는 $O_2$>$N_2$O>NO 순으로 반응속도가 빠르게 나타났다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.19-24
• /
• 2017

Cryogenic milling which is a combined process of low-temperature treatment and mechanical milling was applied to fabricate high critical current density $(J_c)MgB_2$ bulk superconductors. Liquid nitrogen was used as a coolant, and no solvent or lubricant was used. Spherical Mg ($6-12{\mu}m$, 99.9 % purity) and plate-like B powder (${\sim}1{\mu}m$, 97 % purity) were milled simultaneously for various time periods (0, 2, 4, 6 h) at a rotating speed of 500 rpm using $ZrO_2$ balls. The (Mg+2B) powders milled were pressed into pellets and heat-treated at $700^{\circ}C$ for 1 h in flowing argon. The use of cryomilled powders as raw materials promoted the formation reaction of superconducting $MgB_2$, reduced the grain size of $MgB_2$, and suppressed the formation of impurity MgO. The superconducting critical temperature ($T_c$) of $MgB_2$ was not influenced as the milling time (t) increased up to 6 h. Meanwhile, the critical current density ($J_c$) of $MgB_2$ increased significantly when t increased to 4 h. When t increased further to 6 h, however, $J_c$ decreased. The $J_c$ enhancement of $MgB_2$ by cryogenic milling is attributed to the formation of the fine grain $MgB_2$ and a suppression of the MgO formation.

• 충청수학회지
• /
• 제7권1호
• /
• pp.117-122
• /
• 1994

In this paper we show that if {$H_n$} is a continuous strong higher derivation of order n on an ultraprime Banach algebra with a constant c, then $c||H_1||^2{\leq}4||H_2||$ and for each $1{\leq}l$ < n $$c^2||H_1||\;||H_{n-l}{\leq}6||H_n||+\frac{3}{2}\sum_{\array{i+j+k=n\\i,j,k{\geq}1}}||H_i||\;||H_j||\;||H_k||+\frac{3}{2}\sum_{\array{i+k=n\\i{\neq}l,\;n-1}}||H_i||\;||H_k|| $$ and for a strong higher derivation {$H_n$} of order n on a prime ring A we also show that if [$H_n$(x),x]=0 for all $x{\in}A$ and for every $n{\geq}1$, then A is commutative or $H_n=0$ for every $n{\geq}1$.

• 한국안전학회지
• /
• 제12권2호
• /
• pp.45-56
• /
• 1997

Fracture behavior of ex-serviced 1Cr-0.5Mo steel was measured at room($24^{\circ}C$) and elevated($538^{\circ}C$) temperature and compared with that measured with virgin 1Cr-0.5Mo steel. Compact C(T) specimens were machined from the base and welded test materials. In case of the C(T) specimens of the weld, fatigue precrack was introduced along the fusion line so that following crack growth should occurs along the region of heat affected zone. It was observed that the J-R curve of the serviced material was significantly lower than that of the virgin material at room temperature. Brittle fracture was observed in the serviced material. On the other hand, at elevated temperature no noticeable difference was found between the J-R curves of the virgin and the serviced material. The measured J-R curves were also compared with those of the 1.25Cr-0.5Mo steel obtained from the other literatures. Optical microscopy and SEM examination of the serviced material reveal the carbide in/along the grain boundary which shows material degradation due to long-term usage. An example of application of the measured J-R curves is shown.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.107-108
• /
• 2006

High $J_c$ $YBa_2Cu_3O_x$, superconducting films were fabricated by MOD method using fluorine-free dichloroacetic acid(DCA) as chelating solvent for preparing precursor solution. DCA-MOD precursor solution was coated on a single crystal (001) $LaAlO_3$(LAO) substrate by a dip coating method with a speed of 25 mm/min. Coated films were calcined at lower temperature up to $500^{\circ}C$ and Conversion heat treatment was performed at various temperatures of $780{\sim}810^{\circ}C$. SEM observations showed that films have very dense microstructures for the films prepared at the temperature higher than $800^{\circ}C$ regardless of diluting solvent; methanol or 2-methoxyethanol. A High critical current density ($J_c$) of 1.28 $MA/cm^2$ (@77 K and self-field) was obtained for the YBCO film prepared using 2-methoxyethanol as a solvent.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2001년도 Proceedings of the Pharmaceutical Society of Korea
• /
• pp.217.1-217.1
• /
• 2001

• 대한약학회:학술대회논문집
• /
• 대한약학회 2000년도 NEW STRATEGY FOR DRUG DEVELOPMENT IN POST-GENOMIC ERA(대한약학회)
• /
• pp.174.1-174.1
• /
• 2000

• 대한약학회:학술대회논문집
• /
• 대한약학회 2001년도 Proceedings of the Pharmaceutical Society of Korea
• /
• pp.158.1-158.1
• /
• 2001