• 한국전기전자재료학회논문지
• /
• 제18권1호
• /
• pp.57-61
• /
• 2005

The microwave dielectric properties of 0.6TiTe$_3$O$_{8}$-0.4MgTiO$_3$ ceramics with H$_3$BO$_3$-SnO were investigated to improve the sintering condition for the LTCC. According to the X-ray diffraction patterns, 0.6TiTe$_3$O$_{8}$-0.4MgTiO$_3$ ceramics with H$_3$BO$_3$-SnO had the columbite structure of TiTe$_3$O$_{8}$ phase and the ilmenite structure of MgTiO$_3$ phase and there were no second phase. Increasing the addition of H$_3$BO$_3$-SnO, the density and dielectric constant of the 0.6TiTe$_3$O$_{8}$-0.4MgTiO$_3$ ceramics were increased but the quality factor was decreased. The temperature coefficient of resonant frequency was shifted to the negative(-) direction with addition of H$_3$BO$_3$-SnO.EX>-SnO.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권4호
• /
• pp.144-148
• /
• 2005

In this study, the microwave dielectric properties of $0-6TiTe_3O_8-0.4MgTiO_3$ ceramic with $H_3BO_3$ and SnO were investigated to reduce the sintering time for the LTCC application. According to the X-ray diffraction patterns, both of $0-6TiTe_3O_8-0.4MgTiO_3$ ceramic with $H_3BO_3$ and SnO had the columbite structure of $TiTe_3O_8$ Phase, the ilmenite structure of $MgTiO_3$ phase. The density and dielectric constant of the $0-6TiTe_3O_8-0.4MgTiO_3$ ceramics with $H_3BO_3$ sintered at $830^{\circ}C$ for 1 hour were decreased but the quality factor was not changed with addition of $H_3BO_3$. Also the temperature coefficient of resonant frequency was not changed hardly. In the case of addition of SnO, the density and dielectric constant were increased but the quality factor was decreased and the temperature coefficient of resonant frequency was shifted to the negative(-) direction.

• 한국세라믹학회지
• /
• 제46권4호
• /
• pp.405-412
• /
• 2009

In high temperature ceramic glazes, a stable range of pink-red colors that produced $Cr_2O_3-SnO_2-CaO-SiO_2$ pigments were factored by Cassiterite($SnO_2$) and Malayaite($CaSnSiO_5$) by $Cr_2O_3$. The experiment examined the influence of $CrCl_3$, a Sn-Cr substitution added with a mineralizer ($H_3BO_3$), as a chromophore in pigments. The experiment also studied the effect of $H_3BO_3$ (2 wt%) when added to malayaite($CaSnSiO_5$) to see if the crystalline reaction will increase. $Cr_2O_3$ was also substituted with $CrCl_3$ in order to prove how much influence $CrCl_3$ had on the $H_3BO_3$. Malayaite and cassiterite were the basic compound materials and the experiment was conducted both with and without mineralizers (2 wt% of $H_3BO_3$). Each compound was synthesized at 800, 1000, 1200, 1300, 1400, $1500^{\circ}C$ for 2 h. Synthesized pigments were analyzed by XRD, FT-IR and UV-Vis. The temperature variation produced two crystal phases that showed the different engaging effects of Cr oxidation. $CrCl_3$ produced a better effect on the malayaite crystal phase, resulting in a more defined pigmentation of the pink-red coloration compared to $Cr_2O_3$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.114-115
• /
• 2007

In this study, low temperature sintering property of the $0.6TiTe_3O_8-0.4MgTiO_3$ ceramics with sintering adds were investigated for LTCC application which enable to cofiring with Ag electrode. $TiTe_3O_8$ mixed with $MgTiO_3$ to improve the temperature property. In the X-ray diffraction patterns, the columbite structure of $TiTe_3O_3$ phase and ilmenite structure of $MgTiO_3$ phase were coexisted in all specimens. In the case of $H_3BO_3$ addition, the bulk density and dielectric constant were decreased but quality factor was increased with amount of $H_3BO_3$ additions. The TCRF of the $0.6TiTe_3O_8-0.4MgTiO_3+xwt%H_3BO_3$ ceramics were moved to positive direction. In another case, SnO addition, the bulk density and dielectric constant were increased but Quality factor was decreased with amount of SnO additions. The TCRF of the $0.6TiTe_3O_8-0.4MgTiO_3$+ywt%SnO ceramics were shifted to negative direction. The dielectric constant, quality factor and TCRF of the $0.6TiTe_3O_8-0.4MgTiO_3$ ceramics with $2wt%H_3BO_3$ and 2.5wt%SnO sintered at $830^{\circ}C$ for 1h, were 28.5, 39,570GHz, $+9.34ppm/^{\circ}C$ and 29.86, 35,80000z, $-0.58ppm/^{\circ}C$, respectively.

• 한국세라믹학회지
• /
• 제43권2호
• /
• pp.92-97
• /
• 2006

Dolomite type $BaSn(BO_3)_2$ ceramics with rhombohedral crystal structure has been synthesized via solid state reaction route. Dielectric properties were measured for the samples sintered at $1050\~1200^{\circ}C$ for 2 h in air. Dielectric constant, loss tangent, and temperature coefficient were increased with sintering temperature due to the evolution of $BaSnO_3$, secondary, phase. Optimum dielectric properties were obtained at the $BaSn(BO_3)_2$ ceramics sintered at $1100^{\circ}C.\;CuO/Bi_2O_3$ was added to $BaSn(BO_3)_2$ ceramics to lower the sintering temperature for LTCC application, then Co and Fe-based coloring agents were added for colorizing the LTCC tape. Typical dielectric properties of $BaSn(BO_3)_2$ ceramics with $5 wt\%\;CuO/Bi_2O_3\;and\;3wt\%$ Co-coloring agent that sintered at $900^{\circ}C$ were $\varepsilon_r=9.89,\;tan{\delta}=0.92\times10^{-3},\;and\;TCC=112ppm/^{\circ}C$. Thus obtained LTCC tape was co-fired with Ag paste for compatibility test and revealed no sign of Ag reaction with the ceramics.

• 센서학회지
• /
• 제23권3호
• /
• pp.211-215
• /
• 2014

The Pt-, Ni- and Cr-decorated tubular $SnO_2$ nanofibers for gas sensors were prepared by the electrospinning of polyvinylpyrrolidone (PVP) nanofibers containing Pt, Ni, and Cr precursors, the sputtering of $SnO_2$ on the electrospun PVP nanofibers, and the removal of sacrificial PVP parts by heat treatment at $600^{\circ}C$ for 2 h. Pt-decorated tubular $SnO_2$ nanofibers showed high response ($R_a/R_g=210.5$, $R_g$: resistance in gas, $R_a$: resistance in air) to 5 ppm $C_2H_5OH$ at $350^{\circ}C$ with negligible cross-responses to other interference gases (5 ppm trimethylamine, $NH_3$, HCHO, p-xylene, toluene and benzene). Cr-decorated tubular $SnO_2$nanofibers showed the selective detection of p-xylene at $400^{\circ}C$. In contrast, no significant selectivity to a specific gas was found in Ni-decorated tubular $SnO_2$ nanofibers. The selective and sensitive detection of gases using Pt-decorated and Cr-decorated tubular $SnO_2$ nanofibers were discussed in relation to the catalytic promotion of gas sensing reaction.

• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.356-362
• /
• 2006

본 연구에서는 석탄가스화복합발전(integrated gas combined cycle, 이하 IGCC) 시스템의 석탄가스화기로부터 생산되는 석탄가스가 환원제로 이용되는 $SO_2$ 환원공정인 직접 황 회수 공정(direct sulfur recovery process, 이하 DSRP)에서 이용 가능한 Sn-Zr계 촉매 상에서의 $SO_2$ 환원반응특성을 조사하였다. Sn-Zr계 촉매는 0/1, 1/4, 1/1, 2/1, 3/1, 1/0의 Sn/Zr 몰비로 조절하여 침전법 및 공침법으로 제조되었다. 공간속도가 $10,000ml/g_{-cat.}{\cdot}h$, 반응물 몰비$([CO(or\;H_2)]/[SO_2])$가 2.0인 반응조건 하에서 Sn-Zr계 촉매를 이용하여 온도를 변화시킨 가운데 석탄가스에 포함되어 있는 $H_2$ 또는 CO를 환원제로 사용하여 $SO_2$ 환원에 대한 반응특성이 조사되었다. 실험 결과, 환원제의 종류에 상관없이 $SnO_2$와 $ZrO_2$보다 Sn-Zr계 촉매가 활성이 더 높았으며, 환원제의 종류에 대한 반응성 조사 결과, $H_2$보다 CO가 $SO_2$ 환원에 더 높은 반응성을 나타내었다. $H_2$가 환원제로 이용된 $SO_2$ 환원특성을 조사한 결과, Sn/Zr 비에 따라 제조된 Sn-Zr계 촉매의 종류에 상관없이 온도가 증가함에 따라 반응성이 증가하는 경향을 보이며 Sn/Zr 몰비가 1/4인 촉매를 사용한 경우 $550^{\circ}C$에서 $SO_2$전환율이 94.4％, 원소 황 수율이 66.4％로 높은 반응성을 나타내었다. 반면 CO를 환원제로 이용한 경우에는 Sn/Zr 몰비가 높은 촉매일수록 최적 반응온도가 감소되는 특이한 경향을 나타내었다. Sn-Zr계 촉매 중 Sn/Zr 몰비가 3/1인 $SnO_2-ZrO_2$ 촉매가 가장 낮은 최적 반응온도에서 높은 반응성을 나타내었는데, $325^{\circ}C$에서 $SO_2$전환율이 약 100％, 원소 황 수율이 약 99.5％로 가장 높은 반응성을 얻었다. 그리고 CO가 $H_2$보다 더 많이 포함되어 있는 석탄모사가스에 대하여 환원제로서의 이용가능성을 확인하고자 $CO/H_2$ 비를 달리한 각각의 합성가스에 대하여 $SO_2$ 환원반응실험을 수행하였다. Sn/Zr 몰비가 2/1인 Sn-Zr계 촉매 상에서 $SO_2$ 환원반응 실험 결과, CO 함량이 높은 합성가스일수록 효과적인 환원제임을 확인할 수 있었다. 따라서 Sn-Zr계 촉매가 적용된 DSRP에서 석탄모사가스가 환원제로 이용 가능하다는 것을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.65-68
• /
• 2009

본 연구에서는 eagle 2000 glass위에 APCVD(atmospheric CVD)증착법으로 $SnO_2$:F 박막을 제조하였다. 공정 온도, doping 농도, TTC(Tin tetrachloride)와 $H_2O$, $CH_3OH$의 조성비를 공정 변수로 두었으며, 각 변수에 대한 전기적, 광학적 특성 및 결정성을 확인하였다. hall measurement를 이용 제작된 박막의 전기적 특성을 확인 하였고, uv-VIS spectroscopy, hazemeer를 이용 박막의 광학적 특성을 확인 하였다. 또한 XRD, FESEM, AFM을 이용 박막의 결정성 및 표면 특성을 확인 하였다. 박막의 결정성을 결정짓는 증착 온도의 경우 $590^{\circ}C$에서 완벽한 Tetragonal rutile 형태의 결정성을 보였으며 $SnO_2$:F film $1{\mu}m$ thickness에서 $10({\Omega}/{\square})$ 내외의 우수한 면저항값과 $30(cm^2/Vs)$ 이상의 mobility값을 확인 하였으며, 가시광영역대 에서 높은 투과율과 우수한 haze값을 얻었다.

• 공업화학
• /
• 제18권2호
• /
• pp.155-161
• /
• 2007

본 연구에서는 $SnO_2-ZrO_2$(Sn/Zr = 2/1) 촉매 상에서의 CO에 의한 $SO_2$ 환원반응에 대한 반응온도, 공간속도, [CO]/[$SO_2$] 몰비 등의 반응조건의 최적화를 위한 반응특성을 조사하였다. $300{\sim}550^{\circ}C$의 반응온도, $5000{\sim}30000cm^3/g_{-cat}{\cdot}h$의 공간속도, 1.0~4.0 의 [CO]/[$SO_2$] 몰비 등 다양한 반응조건 범위에서 CO에 의한 $SO_2$ 환원반응에 대한 영향을 살펴본 결과, 최적 반응조건으로 반응온도, 공간속도, [CO]/[$SO_2$] 몰비는 각각 $325^{\circ}C$, $10000cm^3/[g_{-cat}{\cdot}h]$, 2.0이었다. 이 때 $SO_2$ 전환율은 약 99% 이상이었으며, 원소 황 선택도는 95% 이상이었다. 또한 CO에 의한 $SO_2$ 환원반응에서 수분에 대한 영향을 조사한 결과, 수분함량이 2.0~6.0 vol%인 범위에서 수분의 함량이 높을수록 $SO_2$ 전환율 및 원소 황 선택도가 감소됨과 동시에 반응성이 저하됨을 알 수 있었다. 2 vol%의 수분이 함유된 반응조건에서 반응온도와 [CO]/[$SO_2$] 몰비를 각각 $300{\sim}400^{\circ}C$ 및 1.0~3.0으로 변화시킨 결과, 반응온도와 [CO]/[$SO_2$] 몰비가 각각 $340^{\circ}C$와 2.0인 조건에서 가장 높은 반응성을 얻었다. 이 때 $SO_2$ 전환율이 약 90%였으며, 원소 황 선택도는 약 87%였다

• 한국결정성장학회지
• /
• 제24권2호
• /
• pp.84-87
• /
• 2014

Separation/recovery of valuable metals such as zinc, nickel or tin from copper alloy dross has recently attracted from the viewpoints of environmental protection and resource recycling. In this study, preliminary investigation on separation of tin (Sn) from copper alloy dross using selective dissolution method was performed. The tin in the copper alloy dross did not dissolve in an aqueous nitric acid solution which could allow the concentration/separation of tin from the copper alloy dross. Precipitation of tin as $H_2SnO_3$ (meta stannic acid)occurred in the solution and transformed to tin dioxide ($SnO_2$) after drying process. The dried sample was heat-treated at low temperature and its crystal structure, surface morphology and chemical composition were investigated.