• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.5
• /
• pp.237-242
• /
• 2007

Friction coefficient of SM45C steel was surprisingly reduced with $H_2S$ and $C_3H_8$ gas during plasma sulf-nitriding. During the plasma sulf-nitriding, 100-700 sccm of $H_2S$ gas and 100 sccm of $C_3H_8$ gas were added and working pressure and temperature were 2 torr, $500-550^{\circ}C$, respectively. As $H_2S$ gas amount increased over 500 sccm, flake-like structures were developed on top of the nitriding layer and grain size of the nitriding layer were about 100 nm. The friction coefficient for the sample treated plasma sulf-nitriding under $N_2-H_2S$ gas was 0.4 - 0.5. The structure became more finer and amorphous-like along with $N_2-H_2S-C_3H_8$ gas and the nano-sized surface microstructures resulted in high hardness and significantly low friction coefficient of 0.2.

• Korean Journal of Materials Research
• /
• v.18 no.11
• /
• pp.628-633
• /
• 2008

ZnO nanopowders were synthesized by the sol-gel method using hydrazine reduction, and their gas responses to 6 gases (200 ppm of $C_2H_5OH$, $CH_3COCH_3$, $H_2$, $C_3H_8$, 100 ppm of CO, and 5 ppm of $NO_2$) were measured at $300\;{\sim}\;400^{\circ}C$. The prepared ZnO nanopowders showed high gas responses to $C_2H_5OH$ and $CH_3COCH_3$ at $400^{\circ}C$. The sensing materials prepared at the compositions of [$ZnCl_2$]:[$N_2H_4$]:[NaOH] = 1:1:1 and 1:2:2 showed particularly high gas responses ($S\;=\;R_a/R_g,\;R_a$ : resistance in air, $R_g$ : resistance in gas) to 200 ppm of $C_2H_5OH$($S\;=\;102.8{\sim}160.7$) and 200 ppm of $CH_3COCH_3$($S\;= 72.6{\sim}166.2$), while they showed low gas responses to $H_2$, $C_3H_8$, CO, and $NO_2$. The reason for high sensitivity to these 2 gases was discussed in relation to the reaction mechanism, oxidation state, surface area, and particle morphology of the sensing materials.

• Korean Journal of Metals and Materials
• /
• v.50 no.3
• /
• pp.218-223
• /
• 2012

Fe-(8.5, 18.5, 28.3, 36.9) wt% Cr alloys were corroded between 600 and $800^{\circ}C$ for up to 70 h in a 1 atm gas mixture that consisted of 0.0242 atm of $H_2S$, 0.031 atm of water vapor, and 0.9448 atm of nitrogen gas. Their corrosion resistance increased with an increment in the Cr content. The Fe-8.5%Cr alloy corroded fast, forming thick, fragile, nonadherent scales that consisted primarily of an outer FeS layer and an inner (Fe, Cr, O, S)-mixed layer. The outer FeS layer grew into the air by the outward diffusion of $Fe^{2+}$ ions, whereas the inner mixed layer grew by the inward diffusion of oxygen and sulfur ions. At the interface of the outer and inner scales, voids developed and cracking occurred. The Fe-(18.5, 28.3, 36.9)% Cr alloys displayed much better corrosion resistance than the Fe-8.5Cr alloy, because thin $Cr_2O_3$ or $Cr_2S_3$ scales formed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.11
• /
• pp.869-875
• /
• 2009

The purpose of this paper is to investigate the optimal condition of the syngas production by reforming of propane using Gliding arc plasma reformer. The gliding arc plasma reformer in 3 phases has been newly designed and developed with a quick starting and fast response time. It can be applicable to the various types of fuels (Hydrocarbons $C_xH_y$), and it has a high conversion rate of fuels and high production of hydrogen. The parametric screening studies were carried out according to the changes of a steam feed amount i.e., steam/carbon ratio, total gas flow rate and input electric power. The optimum operating conditions were S/C ratio 2.8, total gas flow rate of 14 L/min and input electric power of 2.4 kW. The result of optimum operating conditions showed the 55 % $H_2$, 14 % CO, 15 % $CO_2$, 10 % $C_3H_8$ and 4 % $CH_4$. Also, $C_3H_8$ conversion, $H_2$ yield and $H_2$ selectivity were 90 %, 42 %, 15 %, respectively. The energy efficiency and specific energy requirements were 37 % and 334 kJ/mol respectively.

• Korean Journal of Organic Agriculture
• /
• v.20 no.3
• /
• pp.327-343
• /
• 2012

In order to develop a high cellulolytic direct-fed microorganism (DFM) for ruminant productivity improvement, this study isolated cellulolytic bacteria from the rumen of Holstein dairy cows, and compared their cellulolytic abilities via DM degradability, gas production and cellulolytic enzyme activities. Twenty six bacteria were isolated from colonies grown in Dehority's artificial (DA) medium with 2% agar and cultured in DA medium containing filter paper at $39^{\circ}C$ for 24h. 16s rDNA gene sequencing of four strains from isolated bacteria showed that H8, H20 and H25 strains identified as Ruminococcus flavefaciens, and H23 strain identified as Fibrobacter succinogenes. H20 strain had higher degradability of filter paper compared with others during the incubation. H8 (R. flavefaciens), H20 (R. flavefaciens), H23 (F. succinogenes), H25 (R. flavefaciens) and RF (R. flavefaciens sijpesteijn, ATCC 19208) were cultured in DA medium with filter paper as a single carbon source for 0, 1, 2, 3, 4 and 6 days without shaking at $39^{\circ}C$, respectively. Dry matter degradability rates of H20, H23 and H25 were relatively higher than those of H8 and RF since 2 d incubation. The cumulative gas production of isolated cellulolytic bacteria increased with incubation time. At every incubation time, the gas production was highest in H20 strain. The activities of carboxymethylcellulase (CMCase) and Avicelase in the culture supernatant were significantly higher in H20 strain compared with others at every incubation time (p<0.05). Therefore, although further researches are required, the present results suggest that H20 strain could be a candidate of DFM in animal feed due to high cellulolytic ability.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.804-807
• /
• 2007

The acid gas removal (AGR) system was designed and installed to remove $H_2S$ in coal syngas in the pilot-scale coal gasification system for producing chemicals like Dimethyl Ether(DME). The syngas from the coal gasification at the rate of $100{\sim120$ $Nm^3$/hr included pollutants such as fly ash. $H_2S$, COS, $NH_3$, etc. The designed temperature and pressure of the AGR system are below 50oC and 8 kg/$cm^2$. Fe-chelate was used as an absorbent. $H_2S$ was stably removed below 0.5 ppm in the AGR system when the concentration of $H_2S$ was $150{\sim}450$ ppm. The pH of Fe-chelate solution was also stably maintained between $8{\sim}9$. FeMgO absorbent was also tested to remove $H_2S$ in the lab-scale AGR system and $H_2S$ was also removed below 0.5 ppm in the initial operation.

• Journal of Pharmacopuncture
• /
• v.11 no.1
• /
• pp.177-187
• /
• 2008

Objectives : This study was performed to analyze the effective components of essential oil obtained from Yongdamsagantang, which has been efficacious against leukorrhea in gynecologic diseases. Methods : I obtained the essential oils of Yongdamsagan-tang by hydrodistillation extraction method and supercritical fluid extraction(SFE) method, and then I analyzed those by GC/MS(Gas Chromatography/Mass Spectrum). Results : 1. The optimum SFE(Supercritical Fluid Extraction) condition was obtained in the following experiment conditions: pressure 200atm, temperature $45^{\circ}C$, duration of extraction 25minutes. 2. With GC(Gas Chromatography) and GC/MS(Gas Chromato- graphy/Mass Spectrum) analysis, I identified 37 compounds in the Yongdamsagan-tang's essential oil obtained through the SFE method. The main compounds were as follows : 3-Methyl-but-2-enoic acid,2,2-dimethyl-8-oxo-3,4-dihydro-2H,8H -pyrano[3,2-g]chromen-3-yl ester(49.81%), (Z)-6-Pentadecen-1 -ol(3.19%), (-)-Spathulenol(2.40%). 3. I identified 4 compounds in the Yongdamsagan-tang's essential oil obtained through the hydrodistillation method. The main compounds were as follows : 3-Methyl-but-2-enoic acid, 2,2-dimethyl-8-oxo-3,4-dihydro-2H,8H-pyrano [3,2-g]chromen-3-yl ester(2.61%). 4. 3-Methy I-but-2-enoic acid, 2,2-dimethyl-8-oxo-3,4-dihydro-2H,8H-pyrano[3,2-g] chromen-3-yl ester, all were identified in both the SFE method and the hydrodistillation method, but the others were not identified in common. 5. I also conducted an additional test in order to examine the essential oil's antimicrobial action against bacteria. Both MIC(Minimum Inhibitory Concentrations) and MBC(Minimum Bactericidal Concentrations) were $0.125mg/m{\ell}$ against N. meningitidis, however MIC and MBC were $1.0mg/m{\ell}$ in antimicrobial action against 12 different genera of bacteria.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.356-360
• /
• 2002

Polluting the air with such pollutants as CO, H₂S and SO₂, industrial development huts increased the danger of gas toxication. Futhermore, as the: living standard goes higher, the consumption of explosive hydrocarbonic gases such as butane(C₄H/sub 10/) or propane(C₃H/sub 8/) has been soaring, which results in the danger of a gas explosion. As measures to cope with such dangers, the development of highly sensitive gas sensors, gas detectors adopting gas-sensing technologies, and gas recognition systems are urgently required. The objective of the present research is to develop a gas recognition system that is capable of identifying specific types of selected gases by formulating a semiconductor-typed gas sensor array, which not only improves the selectivity of semiconductor-typed gas sensors but also minimizes the erect of drifts on a single sensor signal, and applying the input pattern data of gases detected by the array to a neural network.

• Journal of Sensor Science and Technology
• /
• v.18 no.1
• /
• pp.72-76
• /
• 2009

The sensing system was designed and fabricated to investigate the ferment environment of soybeans. $NH_3$ gas was saturated after about 7 h and $CO_2$ gas was reached the peak after about 8 h in the inoculation of Bacillus subtilis. However, times that $CO_2$ gas and $NH_3$ gas were reached maximum value without Bacillus subtilis were about 15 h and 18 h, respectively. The sample that inoculated Bacillus subtils had deeper taste than one without it. We found that the peak time of $CO_2$ gas means the starting time of fermentation. If we control the operating time after the start of fermentation, it is expected to make a suitable Chungkukjang to individual preference.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.7
• /
• pp.589-593
• /
• 2011

[ $SnO_2$ ]nano powders were prepared by solution reduction method using tin chloride($SnCl_2{\cdot}2H_2O$), hydrazine($N_2H_4$) and NaOH. The $SnO_2$ thick films for gas sensors were fabricated by screen printing method on alumina substrates and annealed at $300^{\circ}C$ in air, respectively. XRD patterns of the $SnO_2$ nano powders showed the tetragonal structure with (110) dominant orientation. The particle size of $SnO_2$ nano powders at the ratio of $SnCl_2:N_2H_4$+NaOH= 1:6 was about 60 nm. The sensing characteristics were investigated by measuring the electrical resistance of each sensor in a test box. Sensitivity of $SnO_2$ gas sensor to 5 ppm $CH_4$gas and 5 ppm $CH_3CH_2CH_3$ gas was investigated for various $SnCl_2:N_2H_4$+NaOH proportion. The highest sensitivity to $CH_4$ gas and $CH_3CH_2CH_3$ gas of $SnO_2$ sensors was observed at the $SnCl_2:N_2H_4$+NaOH= 1:8 and $SnCl_2:N_2H_4$+NaOH= 1:6, respectively. Response and recovery times of $SnO_2$ gas sensors prepared by $SnCl_2:N_2H_4$+NaOH= 1:6 was about 40 s and 30 s, respectively.